Diphenylamine → HCID 22599334, Verbindung

HRID 1031853Notizen

Reaktionsgleichung

Reaktionsgleichung von HRID 1031853
[Ti:1](Cl)(Cl)(Cl)Cl.[C:6]1([N-:12][C:13]2[CH:18]=[CH:17][CH:16]=[CH:15][CH:14]=2)[CH:11]=[CH:10][CH:9]=[CH:8][CH:7]=1.[Li+].[C:20]1([NH:26][C:27]2[CH:32]=[CH:31][CH:30]=[CH:29][CH:28]=2)[CH:25]=[CH:24][CH:23]=[CH:22][CH:21]=1>C1(C)C=CC=CC=1>[C:13]1([N-:12][C:6]2[CH:7]=[CH:8][CH:9]=[CH:10][CH:11]=2)[CH:14]=[CH:15][CH:16]=[CH:17][CH:18]=1.[C:27]1([N-:26][C:20]2[CH:21]=[CH:22][CH:23]=[CH:24][CH:25]=2)[CH:28]=[CH:29][CH:30]=[CH:31][CH:32]=1.[C:13]1([N-:12][C:6]2[CH:7]=[CH:8][CH:9]=[CH:10][CH:11]=2)[CH:14]=[CH:15][CH:16]=[CH:17][CH:18]=1.[C:13]1([N-:12][C:6]2[CH:7]=[CH:8][CH:9]=[CH:10][CH:11]=2)[CH:14]=[CH:15][CH:16]=[CH:17][CH:18]=1.[Ti+4:1]

Komponenten

5

Edukt 3

HCID 11487DiphenylamineHCID 24193Titanium TetrachlorideHCID 11137635HCID 11137635, Verbindung

Produkt 1

HCID 22599334HCID 22599334, Verbindung

Reagenzien, Katalysatoren, Lösungsmittel 1

HCID 1140TolueneLösungsmittel

Reaktionsbedingungen

Temperatur
-20 °C

Versuchsvorschrift

The same apparatus described in Step (1) of Example 1-E is used in this procedure. The 250 ml dropping funnel is charged with toluene, 50 ml, and titanium tetrachloride, 2.4 ml (0.022 mole). This is added dropwise to the flask containing lithium diphenylamide which is maintained at -20° C. during the addition while stirring magnetically. Total addition time is 30 minutes. The mixture is warmed to room temperature and then refluxed for 2 hours. All volatiles are removed under vacuum to give a deep red oily residue. Unreacted diphenylamine is sublimed from the oil under reduced pressure at 120° C. to give a red solid: Extraction of the solid with hexane, 50 ml, followed by solvent volume reduction under vacuum then cooling to -30° C. yields red crystals of titanium tetrakis(diphenylamide).

Aufarbeitung

  1. additionThis is added dropwise to the flask
  2. temperatureThe mixture is warmed to room temperature
  3. temperaturerefluxed for 2 hours
  4. customAll volatiles are removed under vacuum
  5. customto give a deep red oily residue
  6. customis sublimed from the oil under reduced pressure at 120° C.
  7. customto give a red solid
  8. extractionExtraction of the solid with hexane, 50 ml
  9. temperaturethen cooling to -30° C.

Quellen und Nachweise

ORD-Eintrag
ord-7093cf0b515e4218ae8a7587eaf4ce2f
Quelldatensatz
uspto-grants-1990_09
Patentnummer
US04956323

Notizen zur Reaktion

Wird geladen…