StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Isothiocyanatotrimethylsilane → Pf-06282999

HRID 1056507
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 1056507
[NH2:1][C:2](=[O:21])[CH2:3][NH:4]/[C:5](/[C:12]1[CH:17]=[C:16]([Cl:18])[CH:15]=[CH:14][C:13]=1[O:19][CH3:20])=[CH:6]\[C:7]([O:9]CC)=O.C[Si]([N:26]=[C:27]=[S:28])(C)C>C(OCCCC)(=O)C.CN(C=O)C>[Cl:18][C:16]1[CH:15]=[CH:14][C:13]([O:19][CH3:20])=[C:12]([C:5]2[N:4]([CH2:3][C:2]([NH2:1])=[O:21])[C:27](=[S:28])[NH:26][C:7](=[O:9])[CH:6]=2)[CH:17]=1
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

5

Edukt 2

HCID 75297IsothiocyanatotrimethylsilaneHCID 86684671(Z)-Ethyl 3-((2-amino-2-oxoethyl)amino)-3-(5-chloro-2-methoxyphenyl)acrylate

Produkt 1

HCID 71571306Pf-06282999

Reagenzien, Katalysatoren, Lösungsmittel 2

HCID 6228DimethylformamideLösungsmittelHCID 31272Butyl AcetateLösungsmittel2×

Reaktionsbedingungen

Temperatur
117.5 °C

Versuchsvorschrift

A slurry of (Z)-ethyl 3-((2-amino-2-oxoethyl)amino)-3-(5-chloro-2-methoxyphenyl)acrylate (20 g, 63 mmol) in a mixture of butyl acetate (140 mL) and DMF (38 mL) was treated with trimethylsilyl isothiocyanate (16.8 g, 125 mmol) and the mixture was heated at 115-120° C. for 5-6 hours. The mixture was cooled to 0-5° C., butyl acetate (100 mL) was added and the mixture was slurried for 8 hours. The formed solids were filtered, and the filter cake was washed with butyl acetate (2×100 mL). The solid was dried in a vacuum oven at 50° C. for 12 hours to a tan solid. The solid was dissolved in a 5:1 mixture of DMF and water at room temperature and additional water was added slowly to crystallize the material. The slurry was cooled to 10° C. and stirred for 8 hours, followed by filtration and washing with water. The filter cake was dried in a vacuum oven at 50° C. for 8 hours. The solid was dissolved in a 1:1 mixture of methanol and water and the slurry was heated to 50° C. and held at this temperature for 2 hours. After cooling to 10° C. over 30 minutes, the slurry was held at this temperature for 1 hour, filtered and washed with water and dried in a vacuum oven at 50° C. for 8 hours to give the title compound as a white solid.

Aufarbeitung

  1. temperatureThe mixture was cooled to 0-5° C.
  2. filtrationThe formed solids were filtered
  3. washthe filter cake was washed with butyl acetate (2×100 mL)
  4. customThe solid was dried in a vacuum oven at 50° C. for 12 hours to a tan solid
  5. dissolutionThe solid was dissolved in a 5:1 mixture of DMF and water at room temperature
  6. additionadditional water was added slowly
  7. customto crystallize the material
  8. temperatureThe slurry was cooled to 10° C.
  9. filtrationfollowed by filtration
  10. washwashing with water
  11. customThe filter cake was dried in a vacuum oven at 50° C. for 8 hours
  12. dissolutionThe solid was dissolved in a 1:1 mixture of methanol and water
  13. temperaturethe slurry was heated to 50° C.
  14. waitheld at this temperature for 2 hours
  15. temperatureAfter cooling to 10° C. over 30 minutes
  16. waitthe slurry was held at this temperature for 1 hour
  17. filtrationfiltered
  18. washwashed with water
  19. customdried in a vacuum oven at 50° C. for 8 hours

Quellen und Nachweise

ORD-Eintrag
ord-04d449f91d7644b19113fd36f42d1661
Quelldatensatz
uspto-grants-2016_07
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US09399626B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion