Sulfuric Acid → 2,3,5,6-Tetrafluoroaniline

HRID 1060343

Reaktionsgleichung

Reaktionsgleichung von HRID 1060343
S(=O)(=O)(O)O.[NH2:6][C:7]1[C:14]([F:15])=[C:13]([F:16])[C:10](C#N)=[C:9]([F:17])[C:8]=1[F:18].NC1C(F)=C(F)C(F)=C(F)C=1C#N>>[F:15][C:14]1[C:13]([F:16])=[CH:10][C:9]([F:17])=[C:8]([F:18])[C:7]=1[NH2:6]

Komponenten

4

Edukt 3

HCID 1118Sulfuric Acid2×HCID 873224-Amino-2,3,5,6-tetrafluorobenzonitrileHCID 217319972-Aminotetrafluorobenzonitrile

Produkt 1

HCID 127862,3,5,6-Tetrafluoroaniline

Reaktionsbedingungen

Temperatur
140 °C

Versuchsvorschrift

2,3,5,6-Tetrafluoroaniline was produced from 4-amino-2,3,5,6-tetrafluorobenzonitrile. To be specific, in a 200 ml four-neck flask provided with a stirrer, a thermometer, a dropping funnel, and a water separating tube, 100 g of 60% sulfuric acid was placed and heated to 140° C. To the hot sulfuric acid, 36 g of the raw material, 4-amino-2,3,5,6-tetrafluorobenzonitrile (having a purity of 94% and containing 6% of 2-amino-3,4,5,6-tetrafluorobenzonitrile as an impurity) was added dropwise at a rate of 6 g/hr. The 2,3,5,6-tetrafluoroaniline which was formed by the reaction was expelled by azeotropy with water, guided into the water dropping tube, and separated from the water. The reaction was continued for six hours while the reaction vessel was supplied with the same amount of water as expelled by distillation. After the completion of the reaction, the conversion ratio of the raw material determined by gas chromatography was found to be 96 mol %. When the 2,3,5,6-tetrafluoroaniline expelled by distillation was analyzed, the purity was found to be 95.3% and the yield to be 82.5%.

Aufarbeitung

  1. customTo be specific, in a 200 ml four-neck flask
  2. customprovided with a stirrer
  3. additionwas added dropwise at a rate of 6 g/hr

Quellen und Nachweise

ORD-Eintrag
ord-c82e6f67570b4988be1a3777a2109457
Quelldatensatz
uspto-grants-2003_02
Patentnummer
US06521794B2

Verknüpfte Notizen

Wird geladen…