StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.0
  1. Startseite
  2. /Reaktion

Ammonia → (+-)-Aspartic Acid

HRID 1075701
Notizen
Druckvorschau

Reaktionsgleichung

Reaktionsgleichung von HRID 1075701
N.C([O-])(=O)/C=C\C([O-])=O.[NH4+].[NH4+].[NH2:12][CH:13]([C:18]([O-:20])=[O:19])[CH2:14][C:15]([O-:17])=[O:16].[NH4+].[NH4+].N[C@H](C(O)=O)CC(O)=O.Cl>>[NH2:12][CH:13]([C:18]([OH:20])=[O:19])[CH2:14][C:15]([OH:17])=[O:16]
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

6

Edukt 5

HCID 222Ammonia2×HCID 313Hydrochloric AcidHCID 5960L-Aspartic AcidHCID 10931805diammonium D,L-aspartateHCID 10997209Diammonium maleate

Produkt 1

HCID 424(+-)-Aspartic Acid

Reaktionsbedingungen

Temperatur
40 °C

Versuchsvorschrift

Reaction vessel was a 0.33 liter autoclave which was charged with a saturated aqueous solution of ammonia (150 g) and diammonium maleate (30 g) at a temperature of about 25-40 degrees C. The autoclave was sealed and then pressurized through a gas inlet valve with ammonia gas to a constant pressure of about 114 psig for a period of 30 minutes. The gas inlet valve was then closed and the autoclave maintained at 40 degrees C. for 30 minutes. The autoclave was thereafter heated to about 140-150 degrees C. over a period of 40 minutes and maintained in this temperature range for an additional 50 minutes. The pressure within the reaction vessel rose from about 114 psig to about 700 psig during this heating period. After the temperature of about 140-150 degrees C. and the autogenous pressure had been maintained for 50 minutes, the contents of the reactor were expelled into a second vessel at ambient pressure. The resulting solution of diammonium D,L-aspartate was then neutralized while in the second vessel to a pH of 2.8 (isoelectric point of aspartic acid) with concentrated hydrochloric acid (about 12 molar). A white precipitate of D,L-aspartic acid formed within a few minutes of neutralization with the acid. The precipitated D,L-aspartic acid was isolated by filtration and dried to afford a 71% yield of white crystalline powder. The product was identical to an authentic sample of D,L-aspartic acid obtained by both NMR (Nuclear Magnetic Resonance) and IR (InfraRed) techniques.

Aufarbeitung

  1. customReaction vessel
  2. customThe autoclave was sealed
  3. customThe gas inlet valve was then closed
  4. temperatureThe autoclave was thereafter heated to about 140-150 degrees C
  5. waitover a period of 40 minutes
  6. temperaturemaintained in this temperature range for an additional 50 minutes
  7. waitThe pressure within the reaction vessel rose from about 114 psig to about 700 psig during this heating period
  8. customAfter the temperature of about 140-150 degrees C
  9. temperatureand the autogenous pressure had been maintained for 50 minutes
  10. customthe contents of the reactor were expelled into a second vessel at ambient pressure

Quellen und Nachweise

ORD-Eintrag
ord-76e0f0e18c894b88baf532c7e848278b
Quelldatensatz
uspto-grants-1999_05
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US05907057

Notizen zur Reaktion

Wird geladen…

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion