StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Acetaldehyde → 2-(1-Chloroethyl)-1,4-dimethylbenzene

HRID 1154691
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 1154691
[ClH:1].[CH:2](=O)[CH3:3].[CH3:5][C:6]1[CH:7]=[CH:8][C:9]([CH3:12])=[CH:10][CH:11]=1>>[Cl:1][CH:6]([C:11]1[CH:10]=[C:9]([CH3:12])[CH:8]=[CH:7][C:2]=1[CH3:3])[CH3:5]
KomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

4

Edukt 3

HCID 177AcetaldehydeHCID 313Hydrochloric AcidHCID 7809P-Xylene

Produkt 1

HCID 937002-(1-Chloroethyl)-1,4-dimethylbenzene

Versuchsvorschrift

Gaseous hydrogen chloride was passed into a cold (5° to 10°), rapidly stirred solution of 240 ml (1.96 m) p-xylene and 54.75 ml (0.98 m) acetaldehyde (I) until the conversion (monitored by means of nuclear magnetic resonance spectroscopy) of aldehyde I to bis-1-chloroethyl ether (II) was complete. The lower, aqueous phase was removed and 20 ml (1.96 m) p-xylene (III) and dichloromethane (55 ml) were added. The reaction mixture was cooled and maintained in the temperature range 0° to 5° while the introduction of hydrogen chloride and rapid stirring were continued. Concentrated sulfuric acid, 54.75 ml (1.03 m), was added during 55 minutes. After the addition was completed, stirring and cooling were continued for 45 minutes. The reaction mixture was then quenched with 200 ml water. The resulting mixture was neutralized with concentrated ammonium hydroxide and the organic phase was collected. Dichloromethane (40 ml) was distilled from the organic phase at atmospheric pressure. Fractional distillation of the remainder of the product mixture at reduced pressure (about 30 mm Hg) afforded 333.3 g (3.14 m) xylene III and 78.2 g (0.47 m) chloride IV. The isolated yield of chloride IV was 48% based on aldehyde I or 60% based on consumed xylene III.

Aufarbeitung

  1. customThe lower, aqueous phase was removed
  2. addition20 ml (1.96 m) p-xylene (III) and dichloromethane (55 ml) were added
  3. temperatureThe reaction mixture was cooled
  4. temperaturemaintained in the temperature
  5. customrange 0° to 5° while the introduction of hydrogen chloride
  6. additionConcentrated sulfuric acid, 54.75 ml (1.03 m), was added during 55 minutes
  7. additionAfter the addition
  8. stirringstirring
  9. temperaturecooling
  10. customThe reaction mixture was then quenched with 200 ml water
  11. customthe organic phase was collected
  12. distillationDichloromethane (40 ml) was distilled from the organic phase at atmospheric pressure
  13. distillationFractional distillation of the remainder of the product mixture at reduced pressure (about 30 mm Hg)

Quellen und Nachweise

ORD-Eintrag
ord-b3d0b9aeccba43d3a893e358c6a85e10
Quelldatensatz
uspto-grants-1984_12
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US04490532

Notizen zur Reaktion

Auf dieser SeiteKomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion