StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Isobutylene → Isobutylene

HRID 1252786
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 1252786
[C:1]([C:5]1([NH2:13])[C:10]([NH2:11])=[CH:9][CH:8]=[CH:7][CH:6]1[CH3:12])([CH3:4])([CH3:3])[CH3:2].C1(C)C(N)=CC=CC=1N.CC(=C)C>>[CH3:3][C:1](=[CH2:2])[CH3:4].[C:6]1([CH3:12])[CH:7]=[CH:8][CH:9]=[C:10]([NH2:11])[C:5]=1[NH2:13]
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

5

Edukt 3

HCID 8255IsobutyleneHCID 132052,6-DiaminotolueneHCID 68115044HCID 68115044, Verbindung

Produkt 2

HCID 8255IsobutyleneHCID 175932,3-Diaminotoluene

Reaktionsbedingungen

Temperatur
200 °C

Versuchsvorschrift

Synthesis of the above recited ortho-tert-butyltoluenediamine (hereinafter t-butyl TDA) was carried out in a 1 gallon stainless steel pressure vessel equipped with a mechanical stirrer. The vessel was charged with a 150 gram portion of a powdered commercially available silica-alumina catalyst containing 13% alumina and 1500 grams (12.24 moles) of 2,6-toluenediamine. The autoclave was sealed and purged with nitrogen. A residual blanket of nitrogen was left in the autoclave, leaving the pressure at 16 psig. The contents of the reactor were heated to a temperature of 200° C. with constant agitation. Isobutylene was then introduced into the reactor and 870 grams or 15.5 moles were added over a 30 minute period resulting in an initial reaction of pressure of 970 psig. This provided a mole ratio of 1.26:1 isobutylene to toluenediamine. The reaction mixture was maintained at 200° C. for about 45 hours with constant agitation.

Aufarbeitung

  1. customwas carried out in a 1 gallon stainless steel pressure vessel
  2. customequipped with a mechanical stirrer
  3. additionThe vessel was charged with a 150 gram portion of a powdered commercially available silica-alumina catalyst
  4. customThe autoclave was sealed
  5. custompurged with nitrogen
  6. waitA residual blanket of nitrogen was left in the autoclave
  7. customleaving the pressure at 16 psig
  8. additionwere added over a 30 minute period
  9. customresulting in an initial
  10. customreaction of pressure of 970 psig

Quellen und Nachweise

ORD-Eintrag
ord-2fb4013943714150b2fc5c87acb71ba2
Quelldatensatz
uspto-grants-1988_05
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US04745223

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion