StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Chlorodifluoromethane → Chloro Fluoro Triazolin-3-one

HRID 1292487
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 1292487
COCCOCCOCCOCCOC.[Cl:16][C:17]1[CH:22]=[CH:21][C:20]([N:23]2[C:27](=[O:28])[NH:26][C:25]([CH3:29])=[N:24]2)=[C:19]([F:30])[CH:18]=1.C(=O)([O-])[O-].[K+].[K+].Cl[CH:38]([F:40])[F:39].N1C=CN=N1>>[F:39][CH:38]([F:40])[N:26]1[C:27](=[O:28])[N:23]([C:20]2[CH:21]=[CH:22][C:17]([Cl:16])=[CH:18][C:19]=2[F:30])[N:24]=[C:25]1[CH3:29]
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

6

Edukt 5

HCID 6372Chlorodifluoromethane3×HCID 8925TetraglymeHCID 11430Potassium Carbonate3×HCID 1355016041-(4-chloro-2-fluorophenyl)-4,5-dihydro-3-methyl-5-oxo-1H-1,2,4-triazoleHCID 178418936HCID 178418936, Verbindung

Produkt 1

HCID 9882096
Chloro Fluoro Triazolin-3-one
Ausbeute 251,4 %

Reaktionsbedingungen

Temperatur
185 °C

Versuchsvorschrift

To a one liter resin flask equipped with a cold finger, mechanical stirrer, gas inlet tube, and a thermometer was added 333 mL of tetraglyme, followed by 50.0 grams (0.220 mole--1.0 equiv.) of 4,5-dihydro-1-(4-chloro-2-fluorophenyl)-3-methyl-5-oxo-1H-1,2,4-triazole (% wt/vol. triazole to solvent--15%). Under a nitrogen atmosphere and with stirring the mixture was warmed to 185° C., and 11.4 grams (0.082 mole--0.373 equiv.) of anhydrous potassium carbonate was added in one portion. To this was then added 7.1 grams (0.082 mole--0.373 equiv.) of gaseous chlorodifluoromethane below the surface of the reaction mixture. Upon completion of the addition the reaction mixture was stirred for about 10 minutes. The sequence of potassium carbonate and chlorodifluoromethane addition was then repeated three additional times for a total addition of 1.5 molar equivalents each of potassium carbonate and chlorodifluoromethane. Upon completion of the fourth set of additions the reaction mixture was held at 185° C. for about 15 minutes. After this time GC analysis of the reaction mixture indicated 100% conversion of the triazole starting material. After the reaction mixture was cooled to ambient temperature, the salt by-products were removed by filtration, and the filtrate was slowly poured into 1200 mL of water. The resultant slurry was stirred, and the solid was collected by filtration, washed with four 100 mL portions of water, and dried to a constant weight, yielding 57.3 grams of 90.6% pure 4-difluoromethyl-4,5-dihydro-1-(4-chloro-2-fluorophenyl)-3-methyl-5-oxo-1H-1,2,4-triazole (86.3% yield). GC analysis of the product indicated the presence of about 2.9% O-isomer by-product.

Aufarbeitung

  1. customTo a one liter resin flask equipped with a cold finger, mechanical stirrer, gas inlet tube
  2. additionUpon completion of the addition the reaction mixture
  3. stirringwas stirred for about 10 minutes
  4. temperatureAfter the reaction mixture was cooled to ambient temperature
  5. customthe salt by-products were removed by filtration
  6. additionthe filtrate was slowly poured into 1200 mL of water
  7. stirringThe resultant slurry was stirred
  8. filtrationthe solid was collected by filtration
  9. washwashed with four 100 mL portions of water
  10. customdried to a constant weight

Quellen und Nachweise

ORD-Eintrag
ord-6259e4e99f7c47309fc14421baeee4a0
Quelldatensatz
uspto-grants-1998_05
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US05756755

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion