StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Iodine → (E)-3-cycloheptyl-2-iodo-acrylic acid methyl ester

HRID 1355186
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 1355186
[Mg].[CH:2]1(Br)[CH2:8][CH2:7][CH2:6][CH2:5][CH2:4][CH2:3]1.[Cl-].[Li+].[Cu]C#N.C1([Mg]Br)CCCCCC1.[C:24]([O:28][CH3:29])(=[O:27])[C:25]#[CH:26].[I:30]I>O1CCCC1.BrCCBr>[CH3:29][O:28][C:24](=[O:27])/[C:25](/[I:30])=[CH:26]\[CH:2]1[CH2:8][CH2:7][CH2:6][CH2:5][CH2:4][CH2:3]1
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

10

Edukt 7

HCID 807Iodine2×HCID 13536Methyl propiolateHCID 16992Bromocycloheptane2×HCID 433294Lithium ChlorideHCID 5462224Magnesium2×HCID 178418546HCID 178418546, VerbindungHCID 178419652
HCID 178419652, Verbindung

Produkt 1

HCID 86583970(E)-3-cycloheptyl-2-iodo-acrylic acid methyl esterAusbeute 64,4 %

Reagenzien, Katalysatoren, Lösungsmittel 2

HCID 78391,2-DibromoethaneKatalysatorHCID 8028TetrahydrofuranLösungsmittel6×

Reaktionsbedingungen

Temperatur
-70 °C

Versuchsvorschrift

A mixture of magnesium metal (4.81 g, 200 mmol) and dry tetrahydrofuran (10 mL) under argon was treated with a solution of 1,2-dibromoethane (0.94 g, 5 mmol) in dry tetrahydrofuran (5 mL). The resulting reaction mixture was stirred for 10 min to activate the magnesium metal. The reaction mixture was then treated dropwise with a solution of cycloheptyl bromide (17.7 g, 100 mmol) in dry tetrahydrofuran (30 mL), one-fifth portion over a period of 5 min. The resulting reaction mixture was stirred for 5–10 min to initiate the exothermic reaction. The remaining portion of the cycloheptyl bromide solution was then added dropwise while controlling the inside temperature below 50° C. After complete addition, the solution was stirred for 1 h and then diluted with dry tetrahydrofuran (80 mL). In a separate reaction flask, a mixture of lithium chloride (8.48 g, 200 mmol, predried at 130° C. under high vacuum for 3 h) and copper(I) cyanide (8.96 g, 100 mmol) in dry tetrahydrofuran (110 mL) was stirred at 25° C. under argon for 10 min to obtain a clear solution. The reaction mixture was cooled to −70° C. and then slowly treated with the freshly prepared cycloheptylmagnesium bromide. After the addition, the reaction mixture was allowed to warm to −10° C. where it was stirred for 5 min. The resulting reaction mixture was again cooled back to −70° C. and then treated with methyl propiolate (7.57 g, 90 mmol). The reaction mixture was stirred for 15 h at −70° C. to −50° C. and then slowly treated with a solution of iodine (34.3 g, 135 mmol) in dry tetrahydrofuran (30 mL) while maintaining the temperature at −70° C. to −60° C. After addition of the iodine solution, the cooling bath was removed, and the reaction mixture was allowed to warm to 25° C. where it was stirred for 2 h. The reaction mixture was then poured into a solution consisting of a saturated aqueous ammonium chloride solution (400 mL) and ammonium hydroxide (100 mL), and the organic compound was extracted into ethyl acetate (3×200 mL). The combined organic extracts were successively washed with a saturated aqueous sodium thiosulfate solution (1×400 mL) and a saturated aqueous sodium chloride solution (1×400 mL). The organic layer was then dried over anhydrous magnesium sulfate, filtered, and concentrated in vacuo. Flash chromatography (Merck Silica gel 60, 230–400 mesh, 20/1 to 10/1 hexanes/diethyl ether) afforded (E)-3-cycloheptyl-2-iodo-acrylic acid methyl ester (17.86 g, 64%) as a colorless oil: EI-HRMS m/e calcd for C11H17IO2 (M+) 308.0273, found 308.0273.

Aufarbeitung

  1. customThe resulting reaction mixture
  2. customThe resulting reaction mixture
  3. stirringwas stirred for 5–10 min
  4. customthe exothermic reaction
  5. customthe inside temperature below 50° C
  6. additionAfter complete addition
  7. stirringthe solution was stirred for 1 h
  8. customIn a separate reaction flask
  9. stirringwas stirred at 25° C. under argon for 10 min
  10. customto obtain a clear solution
  11. additionAfter the addition
  12. temperatureto warm to −10° C. where it
  13. stirringwas stirred for 5 min
  14. customThe resulting reaction mixture
  15. temperaturewas again cooled back to −70° C.
  16. stirringThe reaction mixture was stirred for 15 h at −70° C. to −50° C.
  17. temperaturewhile maintaining the temperature at −70° C. to −60° C
  18. customthe cooling bath was removed
  19. temperatureto warm to 25° C. where it
  20. stirringwas stirred for 2 h
  21. additionThe reaction mixture was then poured into a solution
  22. extractionthe organic compound was extracted into ethyl acetate (3×200 mL)
  23. washThe combined organic extracts were successively washed with a saturated aqueous sodium thiosulfate solution (1×400 mL)
  24. dry with materialThe organic layer was then dried over anhydrous magnesium sulfate
  25. filtrationfiltered
  26. concentrationconcentrated in vacuo

Quellen und Nachweise

ORD-Eintrag
ord-9d70c41282c24628aac83dbac5d50bf7
Quelldatensatz
uspto-grants-2007_05
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US07223868B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion