N1C=CC=CC=1.[C:7]([C:9]1[CH:10]=[C:11]2[C:15](=[CH:16][CH:17]=1)[NH:14][C:13](=[O:18])[C:12]2(O)[C:19]1[C:20]([O:25][CH2:26][CH3:27])=[N:21][CH:22]=[CH:23][CH:24]=1)#[N:8].S(Cl)([Cl:31])=O.ClCCl.CO>ClCCl>[Cl:31][C:12]1([C:19]2[C:20]([O:25][CH2:26][CH3:27])=[N:21][CH:22]=[CH:23][CH:24]=2)[C:11]2[C:15](=[CH:16][CH:17]=[C:9]([C:7]#[N:8])[CH:10]=2)[NH:14][C:13]1=[O:18]2.30 ml (28.45 mmol) of pyridine were added to a suspension of 6.00 g (20.32 mmol) of 5-cyano-3-hydroxy-3-(2-ethoxypyridin-3-yl)-1,3-dihydroindol-2-one from example 1.2 in 60 ml of anhydrous dichloromethane (dried over molecular sieves) under nitrogen. After the reaction mixture had been cooled to 0° C., 2.06 ml (28.45 mmol) of thionyl chloride, undiluted, were added dropwise (exothermic reaction), and the reaction mixture was then stirred at room temperature for one hour. A yellow suspension formed. The progress of the reaction was followed by thin-layer chromatography (TLC) (silica gel, dichloromethane/methanol in the ratio 95:5). The reaction mixture was cautiously poured into ice-water. After stirring for 15 minutes, the organic phase was separated off. The aqueous phase was extracted with dichloromethane (2×). All the organic phases were combined and dried over magnesium sulfate and filtered, and the solvent was removed in vacuo. 5.70 g (18.17 mmol, 89%) of the title compound were obtained as an amorphous solid which was employed without further purification in the next stage.