StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Sodium Hydroxide → HCID 13647255, Verbindung

HRID 1638362
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 1638362
[F:1][C@H:2]1[C@H:6]([O:7]C(=O)C2C=CC=CC=2)[C@@H:5]([CH2:16][O:17]C(=O)C2C=CC=CC=2)[O:4][C@H:3]1[N:26]1[CH:33]=[C:32]([I:34])[C:30](=[O:31])[NH:29][C:27]1=[O:28].[OH-].[Na+]>CO.O>[F:1][C@H:2]1[C@H:6]([OH:7])[C@@H:5]([CH2:16][OH:17])[O:4][C@@H:3]1[N:26]1[CH:33]=[C:32]([I:34])[C:30](=[O:31])[NH:29][C:27]1=[O:28]
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

4

Edukt 2

HCID 14798Sodium HydroxideHCID 139636463',5'-Di-O-benzoyl Fialuridine

Produkt 1

HCID 13647255HCID 13647255, Verbindung

Reagenzien, Katalysatoren, Lösungsmittel 1

HCID 22242641Methanol--water (1/1)Lösungsmittel

Reaktionsbedingungen

Temperatur
25 °C

Versuchsvorschrift

A slurry of 1-(2-deoxy-2-fluoro-3,5-di-O-benzoyl-β-D-arabinofuranosyl)-5-iodouracil (4.7 g, 0.0081 mole) from Procedure 6 in 60 mL 50% MeOH/H2O is stirred at 25° C. maintained at pH 10.5 with 3N NaOH until complete dissolution of solid occurs. Progress of the hydrolysis is followed by HPLC (mobile phase=70% H2O/30% MeOH, flow rate=1 mL/min., wave length=282 nm UV detection, column=Whatman 10 ODS-3 reverse-phase 25 cm., injection volume=20 μl at ~0.5 mg/l concentration, α-IX=6.86 min., β-IX =7.98 min., and 5-iodouracil=4.5 min.). When the reaction is complete (16 hr.), 25 mL of water is added and the mixture is concentrated to approximately 30 mL. The clear aqueous concentrate is adjusted to pH 6.5 to 7.0 with 3N HCl. A solid forms, the mixture is stirred at 25° C. for 2 hrs., and at 0 to 5° C. for 5 hrs. The solid is collected by filtration, washed with 30 mL cold H2O and dried at 50° C./5 mm. The yield of product is 2.7 g (90%), mp 223°-226° [360 MHz NMR (CD3OD) 8.28, d, 1H; 6.16, dd, 1H; 5.04, m, 1H; 4.32, m, 1H; 3.95-3.7, m, 3H. Elemental analysis calculated: %C 29.05, %H 2.71, %N 7.53; Found: %C 28.86, %H 2.64, %N 7.50; IR (KBr) NH, OH 3400, 3200 cm-1 ; CO--NH--CO 1725, 1655 cm-1, C--O 1050 cm-1.]

Aufarbeitung

  1. concentrationProgress of the hydrolysis is followed by HPLC (mobile phase=70% H2O/30% MeOH, flow rate=1 mL/min., wave length=282 nm UV detection, column=Whatman 10 ODS-3 reverse-phase 25 cm., injection volume=20 μl at ~0.5 mg/l concentration, α-IX=6.86 min., β-IX =7.98 min., and 5-iodouracil=4.5 min.)
  2. custom(16 hr.), 25 mL of water
  3. additionis added
  4. concentrationthe mixture is concentrated to approximately 30 mL
  5. concentrationThe clear aqueous concentrate
  6. wait, and at 0 to 5° C. for 5 hrs
  7. filtrationThe solid is collected by filtration
  8. washwashed with 30 mL cold H2O
  9. customdried at 50° C./5 mm

Quellen und Nachweise

ORD-Eintrag
ord-d66d02ae20db422eb57d3faa7e51fbc8
Quelldatensatz
uspto-grants-1989_11
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US04879377

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion