Potassium Hydroxide → isobutyltrimethoxysilane KOH

Beteiligte Stoffe

Reaktionsschritte

A 1000 ml 5-neck round-bottom flask rendered inert with nitrogen and equipped with paddle stirrer, dropping funnel, thermometer, and water separator with reflux condenser is charged—in an oil bath at 40° C.—with 117 g (0.636 mol) of isobutyltrimethoxysilane (=2-methyl-1-propyltrimethoxysilane, available commercially from abcr GmbH & Co. KG) and 155.6 g of Isopar E (isoparaffinic hydrocarbon mixture with a boiling range of 113-143° C., available commercially from ExxonMobil). The water separator is filled to the brim with Isopar E. While stirring at 350 rpm, a solution of 42 g (0.636 mol) of potassium hydroxide (85% strength, available commercially from AppliChem) in 32.1 g of demineralized water is metered in over 10 minutes. During this addition, the reaction mixture warms up to 48° C. By subsequent heating it is bought to boiling temperature. The distillate separates out as the lower phase in the water separator. Up to a boiling temperature of 118° C., 73.5 g of clear colorless distillate are collected, which according to analysis by gas chromatography contains 87.1% methanol, 8% water, and 3.6% Isopar E. The hydrolysis of the methoxy radicals, accordingly, is quantitative. During the distillation, a pasty white solid separates out in the reaction mixture. The volatile constituents are removed by distillation at 70° C./4 hPa. The residue left is 94 g of a white, fine powder whose solids content is 99% (determined using the HR73 Halogen Moisture Analyzer solids content balance from Mettler Toledo at 160° C.)

Herkunft & Nachweise