Zurück
HuagongsheHuagongshe Chemie-Druckbericht · Nur für Forschungszwecke
HRID 1991571Erstellt: 25. Oktober 2026

Boron trifluoride → 2-(5-Iodo-1H-indol-3-yl)-N,N-dimethylethanamine

https://huagongshe.com/reaction/1991571

Reaktionsgleichung

Beteiligte Stoffe

RolleNameHCIDEinwaage
EduktBoron trifluorideHCID 6356—
EduktDabcoHCID 9237—
EduktSodium HydroxideHCID 14798—
EduktSodium borohydrideHCID 4311764—
Edukt2-(3-Hydroxy-5-iodo-2-oxo-2,3-dihydro-1H-indol-3-yl)-N,N-dimethyl-acetamideHCID 59129753—
LösungsmittelWaterHCID 962—
LösungsmittelTolueneHCID 1140—
Lösungsmittel1,2-DimethoxyethaneHCID 8071—
Produkt2-(5-Iodo-1H-indol-3-yl)-N,N-dimethylethanamineHCID 1369136010,9%

Reaktionsbedingungen

Temperatur-15 °C

Reaktionsschritte

A 3 L flask is charged with 2-(5-iodo-3-hydroxy-2-oxo-2,3-dihydro-1H-indol-3-yl)-N,N-dimethyl-acetamide (Example 6) (100 g, 0.277 mol), and 800 mL of DME. The supension is cooled to −15° C., and sodium borohydride (31.5 g 96%, 0.832 mol) is added to this mixture, which causes a raise of the temperature by 5C. To this, BF3-etherate is added dropwise during 30 minutes (157.6 g, 1.11 mol). Initially there is a strong exothermic reaction (requires slow addition of BF3-etherate) and evolution of a gas. The temperatureis maintained between −15 and −10° C. during the addition. The formed orange slurry is then allowed to warm slowly to ambient temperature (25-27° C.), and left stirring over night (17 h). To this mixture, then 4N NaOH (555 mL) is added and the mixture is heated under reflux for 50 minutes. Then DABCO (34.3 g) is added, and refluxing the mixture is continued for two additional hours. Then water (250 mL) is added, and the DME is removed on the rotavapor. The obtained orange slurry is then extracted with TBME (1000 mL, 2×600 mL), and the combined organic layers are washed with water (800 mL) and brine (700 mL), and concentrated on the rotavapor to about 600 mL. To the stirred residue, MnO2 (72.4 g), is added, and the exothermic oxidation causes a temperature rise of 20° C. Stirring is continued for one hour, and then the MnO2 is filtered off. Removal of the solvent from the filtrate gives a brown oil, which is dissolved in toluene. The toluene is extracted for three times with 4 N HCl (300 mL, 2×150 mL). After adjustment of the pH of the combined aqueous layers to about 10, the product is re-extracted with TBME (3×700 mL). The combined organic layers are washed with water (500 mL), and brine (500 mL), and after almost complete removal of the solvent on the rotavapor and standing over night at 4° C. some of the product crystallizes (39 g, 44.7%). Further concentration of the mother liquors and standing for two additional days gives another crop of the title product (9.5 g, 10.9%), while still about 20 g of material (about 22%) remains in the mother liquors. 1H-NMR (CDCl3, 300 MHz): δ 2.34 (s, 6H, NMe2); 2.59-2.66 (m, 2H, CH2NMe2); 2.85-2.92 (m, 2H, ArCH2); 6.90 (d, 1H, 3J=2.2 Hz, H-2); 7.03 (d, 1H, 3J=8.4 Hz, H-7); 7.38 (dd, 1H, 4J=1.3 Hz, H-6); 7.91 (d, 1H, H-4); 8.56 (br s, 1H, NH). 13C-NMR (CDCl3-D6, 75 MHz) δ 23.71 (ArCH2); 45.65 (N(CH3)2); 60.32 (CH2NMe2); 82.77 (C-5); 113.36 (C-6); 113.86 (C-3); 122.78 (C-2); 127.87 (C-4); 130.29 (C-7); 130.33 (C-8); 135.62 (C-9).

Herkunft & Nachweise

DOI10.6084/m9.figshare.5104873.v1
PatentnummerUS07645886B2
Quelldatensatzuspto-grants-2010_01
ORD IDord-1a05d64e74cb49b2835aa3e78b71b834
Quellennotizuspto-grants-2010_01