StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

2,4-Dichloropyridine → 1-Amino-2,4-dichloropyridinium 2,4,6-trimethylbenzenesulfonate

HRID 2068362
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 2068362
[Cl:1][C:2]1[CH:7]=[C:6]([Cl:8])[CH:5]=[CH:4][N:3]=1.[C:9]1([CH3:22])[CH:14]=[C:13]([CH3:15])[CH:12]=[C:11]([CH3:16])[C:10]=1[S:17]([O:20][NH2:21])(=[O:19])=[O:18]>ClCCl>[CH3:16][C:11]1[CH:12]=[C:13]([CH3:15])[CH:14]=[C:9]([CH3:22])[C:10]=1[S:17]([O-:20])(=[O:19])=[O:18].[NH2:21][N+:3]1[CH:4]=[CH:5][C:6]([Cl:8])=[CH:7][C:2]=1[Cl:1]
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

4

Edukt 2

HCID 335152,4-DichloropyridineHCID 11830845O-(2,4,6-Trimethylbenzenesulfonyl)hydroxylamine

Produkt 1

HCID 866399551-Amino-2,4-dichloropyridinium 2,4,6-trimethylbenzenesulfonate

Reagenzien, Katalysatoren, Lösungsmittel 1

HCID 6344DichloromethaneLösungsmittel2×

Reaktionsbedingungen

Temperatur
0 °C

Versuchsvorschrift

To a cooled solution (0° C., ice bath) containing 2,4-dichloropyridine (4.0 g, 27.0 mmol) and dichloromethane (60 mL) was added O-(mesitylsulfonyl)hydroxylamine (10.2 g, 27.0 mmol) in dichloromethane (75 mL) quickly, dropwise. The solution was maintained at 0° C. for 15 min, removed from the cooling bath and maintained at ambient temperature for 20 h. The solution was concentrated to afford 1-amino-2,4-dichloropyridinium 2,4,6-trimethylbenzenesulfonate as a light yellow foam (165 MH+). The product thus obtained was combined with tert-butyl 3-(4-fluorophenyl)propioloyl(methyl)carbamate (6.6 g, 24.0 mmol) and THF (100 mL). The resultant solution was cooled to −78° C. (dry ice, acetone bath) and DBU (7.2 mL, 48.0 mmol) was added dropwise over 10 min with rapid stirring. The mixture was kept in the cooling bath with stirring and allowed to proceed for 15 h at ambient temperature. The mixture was then filtered and concentrated. Purification on silica gel (0-80% ethyl acetate/hexanes, 60 min gradient) afforded an off white residue. The residue thus obtained was further purified using preparative HPLC (Phenomonex-Luna, 50×100 mm, 5 micron, C18 column; 0.1M TFA, 0-100% B (B=10% H2O/CH3OH)/A (A=90% H2O/CH3OH), 15 min. gradient) to afford tert-butyl 5,7-dichloro-2-(4-fluorophenyl)pyrazolo[1,5-a]pyridine-3-carbonyl(methyl)carbamate as a white solid. Preparative HPLC retention time: 14.0 min. 1H NMR (400 MHz, CHLOROFORM-d) δ ppm 7.81 (d, J=2.26 Hz, 1H), 7.71 (dd, J=8.91, 5.40 Hz, 2H), 7.16 (t, J=8.66 Hz, 2H), 7.03 (d, J=2.26 Hz, 1H), 3.26 (s, 3H), 1.12 (s, 9H). LCMS retention time: 2.810 min. LC data was recorded on a Shimadzu LC-10AS liquid chromatograph equipped with a Phenomenex-Luna, 10 micron, C18, 3.0×50 mm column using a SPD-10AV UV-Vis detector at a detector wave length of 220 nM. The elution conditions employed a flow rate of 4 mL/min, a gradient of 100% solvent A/0% solvent B to 0% solvent A/100% solvent B, a gradient time of 3 min, a hold time of 1 min, and an analysis time of 4 min where solvent A was 10% CH3OH/90% H2O/10 mM TFA and solvent B was 10% H2O/90% CH3OH/10 mM TFA. MS data was determined using a Micromass Platform for LC in electrospray mode. m/z 460 (MNa+).

Aufarbeitung

  1. customremoved from the cooling bath
  2. temperaturemaintained at ambient temperature for 20 h
  3. concentrationThe solution was concentrated

Quellen und Nachweise

ORD-Eintrag
ord-8ee956787496462c98cd9d732d5f9436
Quelldatensatz
uspto-grants-2012_10
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US08293909B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion