[CH2:1]([N:8]1[C:13]2=[N:14][C:15]3[N:16]([CH3:24])[C:17](=O)[N:18]([CH3:22])[C:19](=[O:21])[C:20]=3[N:12]2[C:11]([OH:25])=[CH:10][C:9]1=[O:26])[C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][CH:3]=1.[BH4-].[Li+].Cl>O1CCOCC1>[CH2:1]([N:8]1[C:13]2=[N:14][C:15]3[N:16]([CH3:24])[CH2:17][N:18]([CH3:22])[C:19](=[O:21])[C:20]=3[N:12]2[C:11]([OH:25])=[CH:10][C:9]1=[O:26])[C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][CH:3]=1To a suspension of 395 g (1.12 moles) of 9-benzyl-1,3-dimethyl-6-hydroxy-pyrimido[2,1-f]purine-2,4,8(1H,3H,9H)-trione in 10.5 liters of dry 1,4-dioxan, add 68.1 g (3.14 moles) of lithium borohydride in portions. Maintain the reaction temperature at 20°-25° C. by controlling the rate of addition and by use of a cooling bath as needed. Stir the mixture at room temperature for 0.5 hour, then reflux for 18 hours. Remove a portion of the solvent under reduced pressure, and purge the system with nitrogen as the vacuum is released. Allow the residue to cool; then add 4.5 liters of chloroform. To the resultant mixture, cautiously add dropwise 1.1-liters of water. Stir the mixture at room temperature until two clear phases result. Add 3N hydrochloric acid portionwise to bring the pH to 4-5. Separate the layers, and extract the aqueous phase with two 1.1-liter portions of chloroform. Wash the combined extracts with three 1.1 liter volumes of water, and dry over anhydrous sodium sulfate. Filter off the drying agent, and remove volatiles from the filtrate under reduced pressure. Crystallize the residue from methanolethyl acetate to obtain title compound (I) as a solid with mp 176°-182° C.