StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Benzyl Alcohol → 4-Benzyloxy-3-pyrrolin-2-one

HRID 231887
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 231887
[CH3:1][O:2][C:3]1[CH2:7][NH:6][C:5](=[O:8])[CH:4]=1.C(O)[C:10]1[CH:15]=[CH:14][CH:13]=[CH:12][CH:11]=1.CS(O)(=O)=O.C([O-])(O)=O.[Na+]>C(Cl)Cl>[CH2:1]([O:2][C:3]1[CH2:7][NH:6][C:5](=[O:8])[CH:4]=1)[C:10]1[CH:15]=[CH:14][CH:13]=[CH:12][CH:11]=1
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

6

Edukt 4

HCID 244Benzyl AlcoholHCID 6395Methanesulfonic AcidHCID 516892Sodium BicarbonateHCID 5747694-methoxy-2,5-dihydro-1H-pyrrol-2-one

Produkt 1

HCID 27247414-Benzyloxy-3-pyrrolin-2-one

Reagenzien, Katalysatoren, Lösungsmittel 1

HCID 6344
Dichloromethane
Lösungsmittel

Reaktionsbedingungen

Temperatur
80 °C

Versuchsvorschrift

5.7 g of 4-methoxy-3-pyrrolin-2-one and 10.8 g of benzyl alcohol were mixed with 0.4 g of methane sulfonic acid and stirred for 24 hours at 80° C. and 20 mbars. Then the reaction solution was mixed with 50 ml of ice water and 100 ml of methylene chloride and neutralized with 4 ml of saturated NaHCO3 solution. The aqueous phase was extracted twice more with 50 ml each of methylene chloride. After drying of the organic phase over Na2SO4 and distilling off of the solvent, the residue was mixed with 150 ml of ice water, heated to 100° C. and 100 ml of water-benzyl alcohol was azeotropically distilled off. The crystals precipitated during the cooling were recrystallized hot from 50 ml of toluene. 6.7 g of white, crystalline product with a melting point of 147° to 148° was obtained. For the product:

Aufarbeitung

  1. extractionThe aqueous phase was extracted twice more with 50 ml each of methylene chloride
  2. dry with materialAfter drying of the organic phase over Na2SO4
  3. distillationdistilling off of the solvent
  4. additionthe residue was mixed with 150 ml of ice water
  5. temperatureheated to 100° C.
  6. distillation100 ml of water-benzyl alcohol was azeotropically distilled off
  7. customThe crystals precipitated during the cooling
  8. customwere recrystallized hot from 50 ml of toluene
  9. custom6.7 g of white, crystalline product with a melting point of 147° to 148° was obtained

Quellen und Nachweise

ORD-Eintrag
ord-8caa1fe527544a2e9c53fbfaa7fadd98
Quelldatensatz
uspto-grants-1989_07
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US04849528

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion