4-Aminophenol → 3-[3-(Dimethoxymethylsilyl)propoxy]benzenamine

Beteiligte Stoffe

Reaktionsbedingungen

Reaktionsschritte

Using the general procedure described in Example 1 a reactor was charged with 60 g (0.55 mole) of p-aminophenol, 43.28 g of a 50% by weight aqueous solution of sodium hydroxide (0.54 mole NaOH), 112 cc dimethylsulfoxide and 120 cc toluene. The resultant mixture was heated to the boiling point for six hours under a nitrogen atmosphere to remove all of the water present by azeotropic distillation. The reaction mixture was then allowed to cool to about 75° C., at which time 100.4 g (0.56 mole) of 3-chloropropyl methyldimethoxysilane was added dropwise while the reaction mixture was stirred. Following completion of the addition the reaction mixture was heated at 115° C. for about 16 hours, following which the mixture was allowed to cool and was filtered to remove any solid material. The solvents were then removed under a pressure of about 15 mm of mercury at a temperature of about 60° C. The pressure was then reduced to from 3 to 4 mm of mercury and the material boiling from 230° to 235° C. was removed. This fraction weighed 112 g, equivalent to a yield of 80% based on starting materials. Analysis by vapor phase chromatography indicated that the purity of the product was greater than 98%. The infrared and nuclear magnetic resonance spectra of the product were consistent with the proposed structure.

Herkunft & Nachweise