StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Pyridine → 1-Chloro-2-(7-chlorodibenzofuran-3-oxy)-ethane

HRID 354689
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 354689
N1C=CC=CC=1.[Cl:7][C:8]1[CH:24]=[CH:23][C:11]2[C:12]3[CH:18]=[CH:17][C:16]([O:19][CH2:20][CH2:21]O)=[CH:15][C:13]=3[O:14][C:10]=2[CH:9]=1.S(Cl)([Cl:27])=O>C1(C)C=CC=CC=1>[Cl:27][CH2:21][CH2:20][O:19][C:16]1[CH:17]=[CH:18][C:12]2[C:11]3[CH:23]=[CH:24][C:8]([Cl:7])=[CH:9][C:10]=3[O:14][C:13]=2[CH:15]=1
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

5

Edukt 3

HCID 1049PyridineHCID 24386Thionyl ChlorideHCID 204295042-(7-Chlorodibenzofuran-3-oxy)-ethanol

Produkt 1

HCID 204295001-Chloro-2-(7-chlorodibenzofuran-3-oxy)-ethaneAusbeute 81,1 %

Reagenzien, Katalysatoren, Lösungsmittel 1

HCID 1140TolueneLösungsmittel2×

Reaktionsbedingungen

Temperatur
70 °C

Versuchsvorschrift

11.9 g (0.15 mole) of pyridine were added to a suspension of 26.2 g (0.1 mole) of 2-(7-chlorodibenzofuran-3-oxy)-ethanol in 100 ml of dry toluene, and 17.9 g (0.15 mole) of thionyl chloride were then added dropwise at 3°-15° C. The mixture was stirred for 1 day at 40° C. and for a further 8 hours at 70° C. and cooled, and 150 ml of toluene and 200 ml of ice-water were added. The organic layer was washed with 100 ml of water, 50 ml of hydrochloric acid and 50 ml of 1 N sodium hydroxide solution in succession and finally with 100 ml of water, and was dried and concentrated. The solid residue was stirred with 40 ml of petroleum ether at +3° C. (ice-bath) for 30 minutes, filtered off with suction, washed with a little cold petroleum ether and dried. 22.8 g of 1-chloro-2-(7-chlorodibenzofuran-3-oxy)-ethane were obtained as colorless crystals of melting point 105°-107° C.; yield: 81% of theory.

Aufarbeitung

  1. additionwere then added dropwise at 3°-15° C
  2. temperaturecooled
  3. washThe organic layer was washed with 100 ml of water, 50 ml of hydrochloric acid and 50 ml of 1 N sodium hydroxide solution in succession and finally with 100 ml of water
  4. customwas dried
  5. concentrationconcentrated
  6. stirringThe solid residue was stirred with 40 ml of petroleum ether at +3° C. (ice-bath) for 30 minutes
  7. filtrationfiltered off with suction
  8. washwashed with a little cold petroleum ether
  9. customdried

Quellen und Nachweise

ORD-Eintrag
ord-dd4ff5ac3863433085d68fa3863b849e
Quelldatensatz
uspto-grants-1983_03
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US04376776

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion