StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Sodium Hydroxide → (2,2-Difluoro-1,3-dioxaindan-5-yl)methanol

HRID 402550
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 402550
[F:1][C:2]1([F:14])[O:6][C:5]2[CH:7]=[CH:8][C:9]([C:11](O)=[O:12])=[CH:10][C:4]=2[O:3]1.COCCO[AlH2-]OCCOC.[Na+].[OH-].[Na+]>C1(C)C=CC=CC=1>[F:14][C:2]1([F:1])[O:6][C:5]2[CH:7]=[CH:8][C:9]([CH2:11][OH:12])=[CH:10][C:4]=2[O:3]1
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

5

Edukt 3

HCID 14798Sodium HydroxideHCID 6087722,2-Difluoro-1,3-benzodioxole-5-carboxylic acidHCID 16684438Red-Al

Produkt 1

HCID 12814281(2,2-Difluoro-1,3-dioxaindan-5-yl)methanol

Reagenzien, Katalysatoren, Lösungsmittel 1

HCID 1140TolueneLösungsmittel

Reaktionsbedingungen

Temperatur
20 °C

Versuchsvorschrift

Commercially available 2,2-difluoro-1,3-benzodioxole-5-carboxylic acid (1.0 eq) was slurried in toluene (10 vol). Vitride® (2 eq) was added via addition funnel at a rate to maintain the temperature at 15 to 25° C. At the end of the addition, the temperature was increased to 40° C. for 2 hours (h), then 10% (w/w) aqueous (aq) NaOH (4.0 eq) was carefully added via addition funnel, maintaining the temperature at 40 to 50° C. After stirring for an additional 30 minutes (min), the layers were allowed to separate at 40° C. The organic phase was cooled to 20° C., then washed with water (2×1.5 vol), dried (Na2SO4), filtered, and concentrated to afford crude (2,2-difluoro-1,3-benzodioxol-5-yl)-methanol that was used directly in the next step.

Aufarbeitung

  1. additionAt the end of the addition
  2. temperaturethe temperature was increased to 40° C. for 2 hours (h)
  3. temperaturemaintaining the temperature at 40 to 50° C
  4. customto separate at 40° C
  5. temperatureThe organic phase was cooled to 20° C.
  6. washwashed with water (2×1.5 vol)
  7. dry with materialdried (Na2SO4)
  8. filtrationfiltered
  9. concentrationconcentrated

Quellen und Nachweise

ORD-Eintrag
ord-7160bb79b80e49f78f7766aa234e1ff2
Quelldatensatz
uspto-grants-2014_06
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US08742122B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion