StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.1
  1. Startseite
  2. /Reaktion

Ethanol → Ethyl (3-phenoxyphenyl)acetate

HRID 477339
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 477339
[O:1]([C:8]1[CH:9]=[C:10]([CH2:14][C:15]([OH:17])=[O:16])[CH:11]=[CH:12][CH:13]=1)[C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][CH:3]=1.S(=O)(=O)(O)O.[CH2:23](O)[CH3:24]>>[O:1]([C:8]1[CH:9]=[C:10]([CH2:14][C:15]([O:17][CH2:23][CH3:24])=[O:16])[CH:11]=[CH:12][CH:13]=1)[C:2]1[CH:3]=[CH:4][CH:5]=[CH:6][CH:7]=1
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

4

Edukt 3

HCID 702EthanolHCID 1118Sulfuric AcidHCID 1417493-Phenoxyphenylacetic acid

Produkt 1

HCID 12509092Ethyl (3-phenoxyphenyl)acetate

Reaktionsbedingungen

Temperatur
20 °C

Versuchsvorschrift

(3-Phenoxyphenyl)acetic acid (11.5 g) and 36N aqueous sulphuric acid solution (3 cc) in ethanol (200 cc) are brought to boiling for 72 hours. After being cooled to approximately 20° C., the reaction mixture is concentrated to dryness at 50° C. under reduced pressure (20 mm Hg; 2.7 kPa). The oil is dissolved in dichloromethane (300 cc); the organic phase is washed with water (150 cc), dried over anhydrous magnesium sulphate, filtered and concentrated to dryness at 40° C. under reduced pressure (20 mm Hg; 2.7 kPa). The residue is dissolved in a mixture (20 cc) of cyclohexane and ethyl acetate (50:50 by volume), and the solution is poured onto silica (400 g) contained in a column 5 cm in diameter. Elution is performed with a mixture of cyclohexane and ethyl acetate (50:50 by volume), and the corresponding eluate is concentrated to dryness at 40° C. under reduced pressure (20 mm Hg; 2.7 kPa). Ethyl (3-phenoxyphenyl)acetate (7.4 g) is thereby obtained, and is used in the crude state in the subsequent syntheses.

Aufarbeitung

  1. concentrationthe reaction mixture is concentrated to dryness at 50° C. under reduced pressure (20 mm Hg; 2.7 kPa)
  2. dissolutionThe oil is dissolved in dichloromethane (300 cc)
  3. washthe organic phase is washed with water (150 cc)
  4. dry with materialdried over anhydrous magnesium sulphate
  5. filtrationfiltered
  6. concentrationconcentrated to dryness at 40° C. under reduced pressure (20 mm Hg; 2.7 kPa)
  7. dissolutionThe residue is dissolved in a mixture (20 cc) of cyclohexane and ethyl acetate (50:50 by volume)
  8. additionthe solution is poured onto silica (400 g)
  9. washElution
  10. additionis performed with a mixture of cyclohexane and ethyl acetate (50:50 by volume)
  11. concentrationthe corresponding eluate is concentrated to dryness at 40° C. under reduced pressure (20 mm Hg; 2.7 kPa)

Quellen und Nachweise

ORD-Eintrag
ord-70ed4016b51a42b78a92452f147dcbd8
Quelldatensatz
uspto-grants-1989_12
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US04886835

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion