StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Toluene → 1-Methoxy-4-(pentafluoroethyl)benzene

HRID 504058
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 504058
[F:1][C:2]([F:10])([F:9])[C:3]([F:8])([F:7])[C:4]([O-])=O.[K+].CN([CH:15]=[O:16])C.[C:17]1(C)[CH:22]=[CH:21]C=[CH:19][CH:18]=1>[Cu]I>[CH3:15][O:16][C:17]1[CH:22]=[CH:21][C:4]([C:3]([F:8])([F:7])[C:2]([F:10])([F:9])[F:1])=[CH:19][CH:18]=1
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

5

Edukt 3

HCID 1140TolueneHCID 6228DimethylformamideHCID 23667659Propanoic acid, 2,2,3,3,3-pentafluoro-, potassium salt (1:1)

Produkt 1

HCID 128719661-Methoxy-4-(pentafluoroethyl)benzene

Reagenzien, Katalysatoren, Lösungsmittel 1

HCID 24350Copper(1+) iodide; Copper(I) iodide; Cuprous iodide; Cuprous iodide (CuI)Katalysator

Reaktionsbedingungen

Temperatur
140 °C

Versuchsvorschrift

8.3 g of potassium pentafluoropropionate and 9.8 g of CuI are introduced into a 500 ml three-necked flask equipped with Dean-Stark apparatus and a condenser, under an inert atmosphere. 90 ml of DMF and 110 ml of toluene are added. The medium is heated to 140° C. under nitrogen and 80 ml of toluene are distilled off. The medium is then cooled to RT and then deoxygenated by sparging with nitrogen. 6 g of iodoanisole are then added, followed by heating at 155° C. for 20 hours. After cooling to RT, the medium is diluted with 200 ml of a water/ethyl ether mixture. The medium is then filtered through Celite®. The organic phase is washed 3 times with water, dried over MgSO4 and then evaporated to give 4.3 g of a brown oil.

Aufarbeitung

  1. customequipped with Dean-Stark apparatus and a condenser, under an inert atmosphere
  2. distillation80 ml of toluene are distilled off
  3. temperatureThe medium is then cooled to RT
  4. customdeoxygenated
  5. customby sparging with nitrogen
  6. addition6 g of iodoanisole are then added
  7. temperatureby heating at 155° C. for 20 hours
  8. temperatureAfter cooling to RT
  9. additionthe medium is diluted with 200 ml of a water/ethyl ether mixture
  10. filtrationThe medium is then filtered through Celite®
  11. washThe organic phase is washed 3 times with water
  12. dry with materialdried over MgSO4
  13. customevaporated

Quellen und Nachweise

ORD-Eintrag
ord-3a98ab52cd1f4e43908ead81f851c2f9
Quelldatensatz
uspto-grants-2010_08
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US07777041B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion