StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Sodium hydride → 3-(4-Methyl-1H-imidazol-1-yl)-5-(trifluoromethyl)aniline

HRID 505919
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 505919
[H-].[Na+].[CH3:3][C:4]1[N:5]=[CH:6][NH:7][CH:8]=1.F[C:10]1[CH:11]=[C:12]([NH2:20])[CH:13]=[C:14]([C:16]([F:19])([F:18])[F:17])[CH:15]=1>O1CCCC1.CN1CCCC1=O.C1(C)C=CC=CC=1>[CH3:3][C:4]1[N:5]=[CH:6][N:7]([C:10]2[CH:11]=[C:12]([NH2:20])[CH:13]=[C:14]([C:16]([F:19])([F:17])[F:18])[CH:15]=2)[CH:8]=1
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

7

Edukt 3

HCID 24758Sodium hydrideHCID 27359133-Amino-5-fluorobenzotrifluorideHCID 178418800HCID 178418800, Verbindung

Produkt 1

HCID 120028253-(4-Methyl-1H-imidazol-1-yl)-5-(trifluoromethyl)aniline

Reagenzien, Katalysatoren, Lösungsmittel 3

HCID 1140TolueneLösungsmittel
HCID 8028
Tetrahydrofuran
Lösungsmittel
2×
HCID 13387N-methyl-2-pyrrolidoneLösungsmittel

Reaktionsbedingungen

Temperatur
22.5 °C

Versuchsvorschrift

Sodium hydride (12.18 g, 55-65% m/m, Fluka 71620) is suspended in tetrahydrofuran (60 mL) and a solution of 4-methylimidazole (24.5 g) in tetrahydrofuran (65 mL) is slowly added to the stirred suspension at 20-25° C. Gentle cooling is necessary to maintain the temperature at 20-25° C. during the addition. After completion of the addition, the reaction mixture is stirred for additional 15 minutes at 20-25° C., until gas evolution had ceased. A solution of 3-fluoro-5-trifluoromethyl-phenylamine (XIX) (25 g) in 1-methyl-2-pyrrolidone (125 mL) is added slowly to the reaction mixture and the mixture is stirred for additional 15 minutes at 20-25° C. Then, the reaction mixture is heated at an oil bath temperature of 100° C. to distill off the volatile solvent (tetrahydrofuran). Finally, the temperature is raised to 165° C. (oil bath) and the reaction mixture is stirred for 22 hours at this temperature. For work up, the reaction mixture is poured onto water (500 mL) and the water phase is extracted with t-butyl methyl ether (2×500 mL). The t-butyl methyl ether phases are combined and are extracted with water (2×500 mL). The organic layer is dried on anhydrous magnesium sulfate (19 g) and the solvent is evaporated at 45° C. under reduced pressure to obtain crude 3-(4-methyl-imidazol-1-yl)-5-trifluoromethyl-phenylamine as a yellowish solid. The crude product is contaminated with at least 1 regioisomer. The crude product is dissolved in toluene (93.4 g) at 80-90° C. and the solution is allowed to cool down to room temperature. Crystallization occurred at ca. 35-40° C. The suspension is stirred for additional 2 hours at room temperature and the product is isolated by filtration. The filter cake is washed with ice-cold toluene (25 mL) and dried in vacuo at 50° C. to obtain pure 5-(4-methyl-imidazol-1-yl)-3-trifluoromethyl-phenylamine (I). GC-MS: m/z 241, 222, 213, 200, 186, 172, 160.

Aufarbeitung

  1. temperatureGentle cooling
  2. additionduring the addition
  3. additionAfter completion of the addition
  4. stirringthe mixture is stirred for additional 15 minutes at 20-25° C
  5. temperatureThen, the reaction mixture is heated at an oil bath temperature of 100° C.
  6. distillationto distill off the volatile solvent (tetrahydrofuran)
  7. temperatureFinally, the temperature is raised to 165° C. (oil bath)
  8. stirringthe reaction mixture is stirred for 22 hours at this temperature
  9. additionFor work up, the reaction mixture is poured onto water (500 mL)
  10. extractionthe water phase is extracted with t-butyl methyl ether (2×500 mL)
  11. extractionare extracted with water (2×500 mL)
  12. dry with materialThe organic layer is dried on anhydrous magnesium sulfate (19 g)
  13. customthe solvent is evaporated at 45° C. under reduced pressure
  14. customto obtain crude 3-(4-methyl-imidazol-1-yl)-5-trifluoromethyl-phenylamine as a yellowish solid
  15. temperatureto cool down to room temperature
  16. customCrystallization
  17. customoccurred at ca. 35-40° C
  18. stirringThe suspension is stirred for additional 2 hours at room temperature
  19. customthe product is isolated by filtration
  20. washThe filter cake is washed with ice-cold toluene (25 mL)
  21. customdried in vacuo at 50° C.

Quellen und Nachweise

ORD-Eintrag
ord-daf63c6a71654861852ea5bd422297cb
Quelldatensatz
uspto-grants-2010_08
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US07781597B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion