StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.0
  1. Startseite
  2. /Reaktion

Trifluoroacetic acid → HCID 178448547, Verbindung

HRID 640662
Notizen
Druckvorschau

Reaktionsgleichung

Reaktionsgleichung von HRID 640662
[Cl-].[CH2:2]([N+:6]1[CH:10]=[CH:9][N:8]([CH3:11])[CH:7]=1)[CH2:3][CH2:4][CH3:5].[F:12][C:13]([F:18])([F:17])[C:14]([OH:16])=[O:15].O1CCOCC1>O.O1CCOCC1>[F:12][C:13]([F:18])([F:17])[C:14]([O-:16])=[O:15].[CH2:2]([N+:6]1[CH:10]=[CH:9][N:8]([CH3:11])[CH:7]=1)[CH2:3][CH2:4][CH3:5]
KomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

5

Edukt 3

HCID 6422Trifluoroacetic acid3×HCID 312751,4-DioxaneHCID 178448538HCID 178448538, Verbindung

Produkt 1

HCID 178448547HCID 178448547, Verbindung

Reagenzien, Katalysatoren, Lösungsmittel 1

HCID 218864351,4-Dioxane--water (1/1)Lösungsmittel

Versuchsvorschrift

Analogously to Example 1, 23.0 g (0.132 mol) of 1-butyl-3-methylimidazolium chloride are reacted with 28.0 g of approx. 80% aqueous trifluoroacetic acid, CF3C(O)OH (50% excess). 100 ml of 1,4-dioxane are subsequently added, and 112 ml of HCl- and CF3C(O)OH-containing water/dioxane azeotrope are distilled off at atmospheric pressure (85-101° C.). After four further azeotropic distillations with 100 ml of 1,4-dioxane each time, a further 19 g of approx. 80% aqueous trifluoroacetic acid are added to the residue. 100 ml of 1,4-dioxane are subsequently added, and 105 ml of HCl- and CF3C(O)OH-containing water/dioxane azeotrope are distilled off at atmospheric pressure. After three further azeotropic distillations with 100 ml of 1,4-dioxane each time and drying of the distillation residue under reduced pressure at 1.3 Pa and 70° C., 1-butyl-3-methylimidazolium trifluoroacetate is obtained. The yield is approximately quantitative.

Aufarbeitung

  1. distillationazeotrope are distilled off at atmospheric pressure (85-101° C.)
  2. additionAfter four further azeotropic distillations with 100 ml of 1,4-dioxane each time, a further 19 g of approx. 80% aqueous trifluoroacetic acid are added to the residue
  3. addition100 ml of 1,4-dioxane are subsequently added
  4. addition105 ml of HCl- and CF3C(O)OH-containing water/dioxane
  5. distillationazeotrope are distilled off at atmospheric pressure
  6. dry with materialAfter three further azeotropic distillations with 100 ml of 1,4-dioxane each time and drying of the distillation residue under reduced pressure at 1.3 Pa and 70° C.

Quellen und Nachweise

ORD-Eintrag
ord-2f047d25789c41b9a45450a8db5118ab
Quelldatensatz
uspto-grants-2010_04
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US07692007B2

Notizen zur Reaktion

Wird geladen…

Auf dieser SeiteKomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion