Reaktionsgleichung
C=C.[CH2:3]=[CH:4][CH2:5][CH2:6][CH2:7][CH2:8][CH2:9][CH3:10].B([O-])([O-])[O-]>C[Ti]C>[CH2:3]=[CH2:4].[CH2:3]=[CH:4][CH2:5][CH2:6][CH2:7][CH2:8][CH2:9][CH3:10]Komponenten
5
Reagenzien, Katalysatoren, Lösungsmittel 1
Reaktionsbedingungen
- Temperatur
- 140 °C
Versuchsvorschrift
Ethylene/1-Octene interpolymers were prepared using the general continuous solution procedure described above. Ethylene, 1-octene, and ISOPAR-E solvent were fed into the reactor at rates of about 4.50 lbs/hour, 0.70 lbs/hour, and 30.20 lbs/hour, respectively. The temperature was maintained at about 140° C., and saturated. Examples 3 and 4 were prepared by feeding Catalyst A and Catalyst B, Armeenium borate, and MMAO-3A to the reactor to produce a catalyst concentration of 2.36 ppm, a ratio of catalyst A to catalyst B of 0.44, 53.2 ppm of Armeenium borate, and 8.6 ppm of Al according to the general procedure. Other process parameters are also recorded in Table V.
Aufarbeitung
- customExamples 3 and 4 were prepared
- customto produce a catalyst concentration of 2.36 ppm
Quellen und Nachweise
- ORD-Eintrag
- ord-14674231e99d4d85831a3fbb91e74efc
- Quelldatensatz
- uspto-grants-2011_12
- Patentnummer
- USRE043004E1
Verknüpfte Notizen
Wird geladen…