NC1C=C2C(=CC=1)N=CC=C2.[OH:12][N:13]=[CH:14][C:15]([NH:17][C:18]1[CH:19]=[C:20]2[C:25](=[CH:26][CH:27]=1)[N:24]=[CH:23][CH:22]=[CH:21]2)=[O:16].S(=O)(=O)(O)[OH:29]>>[OH:12][N:13]=[CH:14][C:15]([NH:17][C:18]1[CH:19]=[C:20]2[C:25](=[CH:26][CH:27]=1)[N:24]=[CH:23][CH:22]=[CH:21]2)=[O:16].[C:14]1(=[O:29])[C:19]2=[C:20]3[C:25](=[CH:26][CH:27]=[C:18]2[NH:17][C:15]1=[O:16])[N:24]=[CH:23][CH:22]=[CH:21]32-Hydroxyimino-N-quinolin-6-yl-acetamide was prepared in 61% yield from 6-aminoquinoline according to Procedure A: 1H NMR (DMSO-d6): δ12.4 (s,1H), 10.8 (s, 1H), 9.0 (d, 1H), 8.8 (d, 1H), 8.7 (s, 1H), 8.2 (s, 2H), 7.81 (m, 1H), 7.78 (s, 1H); C11H9N3O2: APCI−MS m/z 216 (M+H)+. To a 1-L 3-neck round bottom flask was placed a magnetic stir bar and 110 mL of concentrated sulfuric acid. The flask was fitted with a thermometer to monitor the temperature of the reaction. The sulfuric acid was heated to 100° C. followed by slow addition of 2-hydroxyimino-N-quinolin-6-yl-acetamide (26.0 g, 0.121 mol). Heat to the reaction was maintained for approximately 1 h. The flask was removed from the heat source, and the reaction was poured slowly and carefully onto a mixture of 1 Kg of ice and 200 g of sodium carbonate. The residual reaction mixture in the reaction vessel was washed out with an additional 40 mL of cold water. The resulting aqueous slurry was stirred for about 1 h and filtered. The solid was washed thoroughly with water, filtered, and air dried to yield 7.31 g (31%) of 3-H-pyrrolo[3,2-f]quinoline-1,2-dione: 1H NMR (DMSO-d6): δ11.1 (s, 1H), 8.8 (d, 1H), 8.7 (d, 1H), 8.2 (d, 1H), 7.6 (m, 1H), 7.4 (d, 1H); APCI−MS m/z 197 (M−H)−. The title compound was prepared in 77% yield from 3-H-pyrrolo[3,2-f]quinoline-1,2-dione and 4-hydrazinophenylmethane sulfonamide according to Procedure G: 1H NMR (DMSO-d6): δ13.1 (s, 1H), 11.5 (s, 1H), 9.3 (d, 1H), 8.9 (d, 1H), 8.0 (d, 1H), 7.9 (m, 1H), 7.6 (d, 1H), 7.6(d, 2H), 7.4 (d, 2H), 6.9(d, 1H), 4.3 (s, 2H), 2.55 (d, 3H); APCI−MS m/z 396 (M+H)+.
Wird geladen…
