StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Ethanol → HCID 178518057, Verbindung

HRID 928518
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 928518
N1C=C([C:6]2[C:7]3[CH:14]=[CH:13][N:12](COCC[Si](C)(C)C)[C:8]=3[N:9]=[CH:10][N:11]=2)C=N1.[O-:23]CC.[Na+].C(O)C.C(OC(=O)C(C#N)CC(OCC)OCC)C>>[N:9]1[C:8]2[NH:12][CH:13]=[CH:14][C:7]=2[C:6]([OH:23])=[N:11][CH:10]=1
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

5

Edukt 4

HCID 702EthanolHCID 2723922Sodium ethoxideHCID 4151505Ethyl 2-cyano-4,4-diethoxybutyrateHCID 426313464-(1H-Pyrazol-4-yl)-7-(2-(trimethylsilyl)ethoxy)methyl-7 H-pyrrolo(2,3-d)-pyrimidine

Produkt 1

HCID 178518057HCID 178518057, VerbindungAusbeute 68,3 %

Reaktionsbedingungen

Temperatur
45 °C

Versuchsvorschrift

Formamidine acetate (5, 1.04 Kg, 10 mol, 1.25 equiv) was added to 7.52 L of (21% wt) sodium ethoxide (EtONa) in ethanol (EtOH, 62.5 equiv) and the resulting solution was stirred for 60 minutes. 2-cyano-4,4-diethoxy-butyric acid ethyl ester (4, 1.8 Kg, 8.0 mol) was then added and the resulting reaction mixture was refluxed for seven hours. The stirring was turned off after the solution was cooled and the solids were allowed to settle. The supernatant ethanol solution was removed, leaving the solids in the bottom of the reaction flask. The ethanol was evaporated and the residue was added back to the solids remaining in the reaction flask with water and ice at a ratio of 600 mL/mol. A solution of 6 N aqueous HCl was added to the resulting solution at a ratio of 500 mL/mol at 15° C. The resulting solution was then heated at 45° C. for 45 minutes. The solution was again cooled to 15° C. and the pH was adjusted to 8.0 with the addition of aqueous ammonium hydroxide. The precipitated solids were collected by filtration, washed with water (2×225 mL/mol) and pulled dry. The solids were further washed with 1:1 ethyl acetate/heptane (500 mL/mol), then heptane (2×250 mL/mol) and dried in vacuum to afford 7H-pyrrolo[2,3-d]pyrimidin-4-ol (7, 738.6 g, 1081 g theoretical, 68.3%) as yellow to brown to yellow crystalline material. For 7: 1H NMR (DMSO-d6, 300 MHz) δ ppm 11.88 (bs, 1H), 11.80 (bs, 1H), 7.81 (s, 1H), 7.02 (dd, 1H, J=3.2, 2.3 Hz), 6.42 (dd, 1H, J=3.5, 2.3 Hz); C6H5N3O (MW, 135.12), LCMS (EI) m/e 136 (M++H) and (M++Na) m/e 158.

Aufarbeitung

  1. customthe resulting reaction mixture
  2. temperaturewas refluxed for seven hours
  3. temperaturewas cooled
  4. customThe supernatant ethanol solution was removed
  5. customleaving the solids in the bottom of the reaction flask
  6. customThe ethanol was evaporated
  7. additionthe residue was added back to the solids
  8. additionA solution of 6 N aqueous HCl was added to the resulting solution at a ratio of 500 mL/mol at 15° C
  9. temperatureThe solution was again cooled to 15° C.
  10. additionthe pH was adjusted to 8.0 with the addition of aqueous ammonium hydroxide
  11. filtrationThe precipitated solids were collected by filtration
  12. washwashed with water (2×225 mL/mol)
  13. custompulled dry
  14. washThe solids were further washed with 1:1 ethyl acetate/heptane (500 mL/mol)
  15. dry with materialheptane (2×250 mL/mol) and dried in vacuum

Quellen und Nachweise

ORD-Eintrag
ord-e0885015318a43f1bfb84c030b39face
Quelldatensatz
uspto-grants-2016_03
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US09290506B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion