HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Compound

Terephthalaldehyde

HCID 12173
New reaction
Print
Basic informationNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
623-27-8
Standard SMILES
O=Cc1ccc(C=O)cc1
InChIKey
KUCOHFSKRZZVRO-UHFFFAOYSA-N
Molecular formula
C8H6O2
Average molar mass
134.13 g/mol
Monoisotopic mass
134.03677943

Names & identifiers

Preferred name
Terephthalaldehyde
IUPAC
terephthalaldehyde
English name
Terephthalaldehyde
Molecular formula
C8H6O2
Molecular weight
134.13

Names & synonyms

TEREPHTHALALDEHYDE1,4-BenzenedicarboxaldehydeTerephthaldehydeTerephthaldicarboxaldehyde1,4-PhthalaldehydepPhthalaldehydeP-DIFORMYLBENZENEUNII-M2Y6E4N2TSpFormylbenzaldehyde4formylbenzaldehydeEINECS 210-784-8M2Y6E4N2TS
Show more names
P-PHTHALALDEHYDETPALBenzene-1,4-dialdehydeP-benzaldehydeTerephtaldehydeTerephthaladehyde
1,4DiformylbenzenepBenzenedicarboxaldehydeNSC-13395DTXSID6060769HSDB 84581,4-TEREPHTHALDICARBALDEHYDE1,4-DICARBOXALDEHYDE-BENZENERefChem:187952

Database identifiers

CAS
623-27-8
PubChem CID
12173
DTXSID
DTXSID6060769
UNII
M2Y6E4N2TS
EC Number
210-784-8
Nikkaji
J38.975G

Properties

Computed structural properties

XLogP
0.9
Topological polar surface area
34.1 Ų
Hydrogen bond donors
0
Hydrogen bond acceptors
2
Rotatable bonds
2
Heavy atoms
10
Formal charge
0
Complexity
107

Experimental & physicochemical properties

Chemical ClassesOther Classes -> Benzaldehydes
SpringerMaterials PropertiesSchoenflies notation
Color/FormNeedles from water
Solubility · 3 items

In water, 200 mg/L at 25 °C

Insoluble in water

Very soluble in ethanol; soluble in ethyl ether, chloroform, alkalies

Flash Point76 °C (169 °F) - closed cup
Boiling Point246 °C
DecompositionWhen heated to decomposition it emits acrid smoke and irritating fumes.
Melting Point117 °C
Physical DescriptionWhite to cream crystalline powder; [Alfa Aesar MSDS]
Stability/Shelf LifeStable under recommended storage conditions.

Physicochemical properties

Melting point
114 · 114-116 °C (lit.)
Boiling point
245 · 245-248 °C (lit.)
Density
1 · 1,06 g/cm3
vapor pressure
0.25 · 0.25-0.46Pa at 20-25℃
refractive index
1.48 · 1.4800 (estimate)
Flash point
76 °C · 76 °C
storage temp.
30 °C · Store below +30°C.
solubility
3 g/l · 3g/l
form
Crystalline Powder
color
White to light yellow
Water Solubility
3 g/L · 3 g/L (50 ºC)
Sensitive
Air Sensitive
BRN
385863 · 385863
Henry's Law Constant
1.6 · 1.6×101 mol/(m3Pa) at 25℃, Abraham and Jr. (2019)
Cosmetics Ingredients Functions
PRESERVATIVE
InChI
1S/C8H6O2/c9-5-7-1-2-8(6-10)4-3-7/h1-6H
InChIKey
KUCOHFSKRZZVRO-UHFFFAOYSA-N
SMILES
[H]C(=O)c1ccc(cc1)C([H])=O
LogP
1 at · 1 at 20.1℃ and pH6.6-6.8
CAS DataBase Reference
623 · 623-27-8(CAS DataBase Reference)
EWG's Food Scores
1 · 1
FDA UNII
2 Y6E4N2TS · M2Y6E4N2TS
NIST Chemistry Reference
1 · 1,4-Benzenedicarboxaldehyde(623-27-8)
EPA Substance Registry System
1 · 1,4-Benzenedicarboxaldehyde (623-27-8)
UNSPSC Code
12352114 · 12352114
NACRES
22 · NA.22
Symbol(GHS)
7 · GHS07
Signal word
Warning
Hazard statements
315 · H315-H319-H335
Precautionary statements
261 · P261-P280a-P304+P340-P305+P351+P338-P405-P501a
PPE
95 · Eyeshields, Gloves, type N95 (US)
Hazard Codes
Xi
Risk Statements
36 · 36/37/38-36/37
Safety Statements
22 · 22-24/25-36-26-37/39
WGK Germany
1 · 1
RTECS
430000 · WZ0430000
Hazard Note
Irritant
TSCA
TSCA listed
HS Code
29122900 · 29122900
Storage Class
11 · 11 - Combustible Solids
Hazard Classifications
2 · Eye Irrit. 2
Hazardous Substances Data
623 · 623-27-8(Hazardous Substances Data)
REACH Registrations
Active

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 5 items

This chemical does not meet GHS hazard criteria for 45.7% (21 of 46) of reports.

Danger

H302 (26.1%): Harmful if swallowed [Warning Acute toxicity, oral]

P261, P262, P264, P264+P265, P270, P271, P280, P301+P317, P302+P352, P304+P340, P305+P351+P338, P316, P319, P321, P330, P332+P317, P337+P317, P361+P364, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 46 reports by companies from 9 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Hazard information

Regulatory Information · 3 items

Chemical: 1,4-Benzenedicarboxaldehyde

REACH registered substance: Terephthalaldehyde (EC: 210-784-8)

1,4-Benzenedicarboxaldehyde: Does not have an individual approval but may be used under an appropriate group standard

Hazards SummaryA skin and strong eye irritant; [Alfa Aesar MSDS] See o-Phthalaldehyde.
Toxic Combustion ProductsSpecial hazards arising from the substance or mixture: Carbon oxides.
Hazard Classes and CategoriesAcute Tox. 4 (26.1%)
Hazardous Reactivities and IncompatibilitiesIncompatible materials: Strong oxidizing agents, strong bases.

Safety & protection

Fire Fighting Procedures · 2 items

Suitable extinguishing media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Advice for firefighters: Wear self contained breathing apparatus for fire fighting if necessary.

Storage ConditionsKeep container tightly closed in a dry and well-ventilated place.
Cleanup Methods · 1 item

ACCIDENTAL RELEASE MEASURES: Personal precautions, protective equipment and emergency procedures: Avoid dust formation. Avoid breathing vapors, mist or gas. Environmental precautions: Do not let product enter drains. Methods and materials for containment and cleaning up: Sweep up and shovel. Keep in suitable, closed containers for disposal.

Disposal Methods · 2 items

SRP: Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in air, soil or water; effects on animal, aquatic and plant life; and conformance with environmental and public health regulations. If it is possible or reasonable use an alternative chemical product with less inherent propensity for occupational harm/injury/toxicity or environmental contamination.

Product: Offer surplus and non-recyclable solutions to a licensed disposal company; Contaminated packaging: Dispose of as unused product.

Preventive Measures · 5 items

ACCIDENTAL RELEASE MEASURES: Personal precautions, protective equipment and emergency procedures: Avoid dust formation. Avoid breathing vapors, mist or gas. Environmental precautions: Do not let product enter drains.

Precautions for safe handling: Provide appropriate exhaust ventilation at places where dust is formed.

Appropriate engineering controls: General industrial hygiene practice.

Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.

SRP: Local exhaust ventilation should be applied wherever there is an incidence of point source emissions or dispersion of regulated contaminants in the work area. Ventilation control of the contaminant as close to its point of generation is both the most economical and safest method to minimize personnel exposure to airborne contaminants. Ensure that the local ventilation moves the contaminant away from the worker.

Personal Protective Equipment (PPE) · 4 items

Eye/face protection: Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin protection: Handle with gloves.

Body Protection: Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place.

Respiratory protection: Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Toxicology

Environmental Fate · 3 items

TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 10(SRC), determined from a structure estimation method(2), indicates that terephthalaldehyde is expected to have very high mobility in soil(SRC). Volatilization of terephthalaldehyde from moist soil surfaces is not expected(SRC) given an estimated Henry's Law constant of 3.4X10-8 atm-cu m/mole(SRC), developed using a fragment constant estimation method(2). Terephthalaldehyde is not expected to volatilize from dry soil surfaces(SRC) based upon an estimated vapor pressure of 4.0X10-3 mm Hg at 25 °C(SRC), determined from a fragment constant method(2). Biodegradation data in soil were not available(SRC, 2018).

AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 10(SRC), determined from a structure estimation method(2), indicates that terephthalaldehyde is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 3.4X10-8 atm-cu m/mole(SRC), developed using a fragment constant estimation method(2). Terephthalaldehyde is not expected to undergo hydrolysis in the environment due to the lack of functional groups that hydrolyze under environmental conditions(3). According to a classification scheme(4), an estimated BCF of 4(SRC), from an estimated log Kow of 1.43(2) and a regression-derived equation(2), suggests the potential for bioconcentration in aquatic organisms is low. Biodegradation data in water were not available(SRC, 2018).

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), terephthalaldehyde, which has an estimated vapor pressure of 4.0X10-3 mm Hg at 25 °C(SRC), determined from a fragment constant method(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase terephthalaldehyde is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 11 hours(SRC), calculated from its rate constant of 3.4X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(2). Based on structural analogy with o-phthalaldehyde, which has an absorption peak at 297 nm(3), terephthalaldehyde may be susceptible to direct photolysis by sunlight(SRC).

Toxicity Summary · 1 item

IDENTIFICATION AND USE: p-Phthalaldehyde is a solid. It is used for modification of coal tar pitch to reduce toxic polycyclic aromatic hydrocarbon content. HUMAN STUDIES: There are no data available. ANIMAL STUDIES: There are no data available.

Effluent ConcentrationsFine aerosol emission rates of terephthalaldehyde from heavy-duty diesel trucks, non-catalyst-equipped and catalyst-equipped automobiles were 1.5, 19.2 and 5.2 ug/km, respectively(1).
Soil Adsorption/Mobility · 1 item

Using a structure estimation method based on molecular connectivity indices(1), the Koc of terephthalaldehyde can be estimated to be 10(SRC). According to a classification scheme(2), this estimated Koc value suggests that terephthalaldehyde is expected to have very high mobility in soil(SRC).

Artificial Pollution SourcesTerephthalaldehyde's production and use as a laboratory chemical(1) may result in its release to the environment through various waste streams(SRC).
Environmental Bioconcentration · 1 item

An estimated BCF of 4 was calculated in fish for terephthalaldehyde(SRC), using an estimated log Kow of 1.43(1) and a regression-derived equation(1). According to a classification scheme(2), this BCF suggests the potential for bioconcentration in aquatic organisms is low.

Volatilization from Water/Soil · 1 item

The Henry's Law constant for terephthalaldehyde is estimated as 3.4X10-8 atm-cu m/mole(SRC) using a fragment constant estimation method(1). This Henry's Law constant indicates that terephthalaldehyde is expected to be essentially nonvolatile from water and soil surfaces(2). Terephthalaldehyde is not expected to volatilize from dry soil surfaces(SRC) based upon an estimated vapor pressure of 4.0X10-3 mm Hg(SRC), determined from a fragment constant method(1).

Environmental Abiotic Degradation · 1 item

The rate constant for the vapor-phase reaction of terephthalaldehyde with photochemically-produced hydroxyl radicals has been estimated as 3.4X10-11 cu cm/molecule-sec at 25 °C(SRC) using a structure estimation method(1). This corresponds to an atmospheric half-life of about 11 hours at an atmospheric concentration of 5X10+5 hydroxyl radicals per cu cm(1). Terephthalaldehyde is not expected to undergo hydrolysis in the environment due to the lack of functional groups that hydrolyze under environmental conditions(2). Based on structural analogy with o-phthalaldehyde, which has an absorption peak at 297 nm(3), terephthalaldehyde may be susceptible to direct photolysis by sunlight(SRC).

Probable Routes of Human Exposure · 1 item

Occupational exposure to terephthalaldehyde may occur through dermal contact with this compound at workplaces where terephthalaldehyde is produced or used. Use data indicate that the general population is not likely to be exposed to terephthalaldehyde. (SRC)

Environmental Fate/Exposure Summary · 1 item

Terephthalaldehyde's production and use as a laboratory chemical may result in its release to the environment through various waste streams. If released to air, an estimated vapor pressure of 4.0X10-3 mm Hg at 25 °C indicates terephthalaldehyde will exist solely as a vapor in the atmosphere. Vapor-phase terephthalaldehyde will be degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals; the half-life for this reaction in air is estimated to be 11 hours. Based on structural analogy with o-phthalaldehyde, which has an absorption peak at 297 nm, terephthalaldehyde may be susceptible to direct photolysis by sunlight. If released to soil, terephthalaldehyde is expected to have very high mobility based upon an estimated Koc of 10. Volatilization from moist soil surfaces is not expected to be an important fate process based upon an estimated Henry's Law constant of 3.4X10-8 atm-cu m/mole. Biodegradation data in soil or water were not available. If released into water, terephthalaldehyde is not expected to adsorb to suspended solids and sediment based upon the estimated Koc. Volatilization from water surfaces is not expected to be an important fate process based upon this compound's estimated Henry's Law constant. An estimated BCF of 4 suggests the potential for bioconcentration in aquatic organisms is low. Hydrolysis is not expected to be an important environmental fate process since this compound lacks functional groups that hydrolyze under environmental conditions (pH 5 to 9). Occupational exposure to terephthalaldehyde may occur through dermal contact with this compound at workplaces where terephthalaldehyde is produced or used. Use data indicate that the general population is not likely to be exposed to terephthalaldehyde. (SRC)

Antidote and Emergency Treatment · 3 items

/SRP:/ Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand-valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR as necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. /Aldehydes and Related Compounds/

/SRP:/ Basic treatment: Establish a patent airway (oropharyngeal or nasopharyngeal airway, if needed). Suction if necessary. Watch for signs of respiratory insufficiency and assist ventilations if necessary. Aggressive airway management may be necessary. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Anticipate seizures and treat if necessary ... . Monitor for shock and treat if necessary ... . Monitor for pulmonary edema and treat if necessary ... . For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with 0.9% saline (NS) during transport ... . Do not use emetics. For ingestion, rinse mouth and administer 5 mL/kg up to 200 mL of water for dilution if the patient can swallow, has a strong gag reflex, and does not drool. Administer activated charcoal ... . /Aldehydes and Related Compounds/

/SRP:/ Advanced treatment: Consider Consider orotracheal or nasotracheal intubation for airway control in the patient who is unconscious, has severe pulmonary edema, or is in severe respiratory distress. Intubation should be considered at the first sign of upper airway obstruction caused by edema. Positive-pressure ventilation techniques with a bag valve mask device may be beneficial. Consider drug therapy for pulmonary edema ... . Consider administering a beta agonist such as albuterol for severe bronchospasm ... . Start IV administration of D5W /SRP: "To keep open", minimal flow rate/. Use 0.9% saline (NS) or lactated Ringer's (LR) if signs of hypovolemia are present. For hypotension with signs of hypovolemia, administer fluid cautiously. Consider vasopressors if patient is hypotensive with a normal fluid volume. Watch for signs of fluid overload ... . Treat seizures with diazepam (Valium) or lorazepam (Ativan) ... . Use proparacaine hydrochloride to assist eye irrigation ... . /Aldehydes and Related Compounds/

Safety data

PPE
Eyeshields, Gloves, type N95 (US)
wgk
1
tsca
TSCA listed
rtecs
WZ0430000
hs_code
29122900
risk_code
36/37/38-36/37
Signal word
Warning
Symbol(GHS)
GHS07
hazard_code
Xi
hazard_note
Irritant
safety_code
22-24/25-36-26-37/39
Storage Class
11 - Combustible Solids
Hazard statements
H315-H319-H335
REACH Registrations
Active
Hazard Classifications
Eye Irrit. 2
Precautionary statements
P261-P280a-P304+P340-P305+P351+P338-P405-P501a
Hazardous Substances Data
623-27-8(Hazardous Substances Data)

Chemistry & industry

Uses & manufacturing

UsesLaboratory chemicals, manufacture of substances.
General Manufacturing Information · 2 items

1,4-Benzenedicarboxaldehyde: ACTIVE

Coal tar pitch (CTP) was modified with p-phthalaldehyde as a cross-linking agent, p-toluenesulfonic acid as a catalyst, and cyclohexane as solvent, to reduce the toxic polycyclic aromatic hydrocarbon content. The optimum reaction conditions were obtained as follows: 8% of p-phthalaldehyde, 5% of p-toluenesulfonic acid, reaction temperature 60 °C, and reaction time 4 hr. Under the optimum conditions, the reduction rate of the 16 toxic PAHs in CTP achieved 82.75%. The physical properties of modified CTP were improved simultaneously. The detoxification mechanism was investigated via TG-DTG and FT-IR. It was proved that the electrophilic substitution cross-linking reaction took place between PAHs and p-phthalaldehyde, which might significantly contribute to the high reduction rate of the 16 toxic PAHs in CTP.

Applications · 2 items

DescriptionTerephthalaldehyde is an aromatic dialdehyde. Theoretically, the two aldehydes of terephthalaldehyde (TPA) are equivalent, so the single or double Schiff base from TPA and d-glucosamine (Glc) may be formed at the same time. It is used as an intermediate for the preparation of dyes and fluorescent whitening agents and in the synthesis of polyimines by reacting with aliphatic diamines. It is also used as a precursor for the preparation of paramagnetic microporous polymeric organic frameworks (POFs) through copolymerization with pyrrole, indole, and carbazole. As a good crosslinking agent, it could used in crosslinked chitosan hydrogel for the selective removal of anionic dyes[1].

UsesTerephthalaldehyde (cas# 623-27-8) is a compound useful in organic synthesis.

Upstream & downstream products

Upstream raw materials

p-XyleneChlorineNitric acid

Downstream products

1-(2-Cyanostyryl)-4-(4-cyanostyryl)benzene1,4-Bis(4-cyanostyryl)benzene1,4-Bis(2-methylstyryl)benzeneFluorescent brightener PS-12,2',5,5'-Tetramethylbiphenyl4-(Bromodifluoromethyl)-1-(difluoromethyl)benzene4-Phenylenediacrylic acid1,4-Bis(2-cyanostyryl)benzene4',4''''-(1,4-Phenylene)bis(2,2':6',2''-terpyridine)95%discontinued 10/25/01">4-Chloromethylbenzaldehyde; >95%discontinued 10/25/011,4-PhenylenediacetonitrileTerephthalic acidN,N'-Terephthalylidenedianiline

Related reactions

73 records
New reaction record
HRID 7179 reaction equation
HRID 7179As reactant
HRID 8901 reaction equation
HRID 8901As reactant
HRID 27848 reaction equation
HRID 27848As product
HRID 29735 reaction equation
HRID 29735As reactant
HRID 67267 reaction equation
HRID 67267As reactant
HRID 90290 reaction equation
HRID 90290As reactant
HRID 119209 reaction equation
HRID 119209As reactant
HRID 132978 reaction equation
HRID 132978As reactant
PreviousPage 1 of 10

Compound notes

On this pageBasic informationNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes