HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Compound

1,4-Benzenediamine, N-(1,3-dimethylbutyl)-N'-phenyl-

HCID 13101
New reaction
Print
Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
793-24-8
Standard SMILES
CC(C)CC(C)Nc1ccc(Nc2ccccc2)cc1
InChIKey
ZZMVLMVFYMGSMY-UHFFFAOYSA-N
Molecular formula
C18H24N2
Average molar mass
268.4 g/mol
Monoisotopic mass
268.19394877

Overview

N-(1,3-dimethylbutyl)-n'-phenyl-p-phenylenediamine is a purple flakes. (NTP, 1992)

Names & identifiers

Preferred name
1,4-Benzenediamine, N-(1,3-dimethylbutyl)-N'-phenyl-
IUPAC
4-N-(4-methylpentan-2-yl)-1-N-phenylbenzene-1,4-diamine
English name
N-(1,3-Dimethylbutyl)-N'-phenyl-p-phenylenediamine
Molecular formula
C18H24N2
Molecular weight
268.4

Names & synonyms

793-24-8N-(1,3-Dimethylbutyl)-N'-phenyl-p-phenylenediamine6PPDSantoflex 13Wingstay 300Antioxidant 4020Permanax 120Vulkanox 4020Flexzone 7LDusantox 6PPDN-(1,3-Dimethylbutyl)-N'-phenyl-1,4-phenylenediamineNocrac 6C
Show more names
dbdaDMBPPDnocrane6cSantoflex 134PDN-1,3-dimethylbutyl-N'-phenyl-p-phenylenediaminedmbpduop562uop588ozonon6c
Diafen 13Flexzone 7FSantoflex 6PPDDiafen FDMBNocrane 6CPermanax 6PPDSantoflex 13FAntage 6C

Database identifiers

CAS
793-24-8
PubChem CID
13101
DTXSID
DTXSID9025114
ChEMBL
CHEMBL1558796
UNII
HJD0U67PS1
EC Number

Properties

Computed structural properties

XLogP
5.6
Topological polar surface area
24.1 Ų
Hydrogen bond donors
2
Hydrogen bond acceptors
2
Rotatable bonds
6
Heavy atoms
20
Formal charge
0
Complexity
250

Experimental & physicochemical properties

PolymersNitrogen Compounds -> Amines, Polyaromatic
LogP5.4
Density · 4 items

1.1 (NTP, 1992) - Denser than water; will sink

1.07

1.02 g/cm³

Relative density of the vapour/air-mixture at 20 °C (air = 1): 1.00

Color/FormDark, violet solid
Solubility · 2 items

less than 1 mg/mL at 63 °F (NTP, 1992)

Solubility in water, g/100ml at 20 °C: 0.01

Flash Point · 3 items

400 °F (NTP, 1992)

204 °C

200 °C c.c.

Boiling Point · 2 items

500 °F at 760 mmHg (NTP, 1992)

370 °C (calculated)

Melting Point · 3 items

113.4 to 113.9 °F (NTP, 1992)

50 °C

45-48 °C

Vapor Pressure · 2 items

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 6 items

This chemical does not meet GHS hazard criteria for 0.3% (1 of 381) of reports.

Danger

H302 (80.1%): Harmful if swallowed [Warning Acute toxicity, oral]

P203, P261, P264, P270, P272, P273, P280, P301+P317, P302+P352, P318, P321, P330, P333+P317, P362+P364, P391, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 381 reports by companies from 20 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Danger

Hazard information

Regulatory Information · 5 items

Chemical: 1,4-Benzenediamine, N1-(1,3-dimethylbutyl)-N4-phenyl-

Hazard Traits - Bioaccumulation; Environmental Persistence

1,4-Benzenediamine, N1-(1,3-dimethylbutyl)-N4-phenyl- is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of 1,4-Benzenediamine, N1-(1,3-dimethylbutyl)-N4-phenyl- are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

REACH registered substance: N-1,3-dimethylbutyl-N'-phenyl-p-phenylenediamine (EC: 212-344-0)

1,4-Benzenediamine, N-(1,3-dimethylbutyl)-N'-phenyl-: Does not have an individual approval but may be used under an appropriate group standard

Other Safety InformationIMAP assessments - 1,4-Benzenediamine, N-(1,3-dimethylbutyl)-N'-phenyl-: Human health tier I assessment
DOT LabelClass 9
Fire Hazards · 2 items

This compound is combustible. (NTP, 1992)

Combustible. Gives off irritating or toxic fumes (or gases) in a fire.

Chemistry & industry

Uses & manufacturing

Uses · 6 items

Used as an antiozonant and antioxidant for butadiene rubber, nitrile-butadiene rubber, styrene-butadiene rubber, and synthetic isoprene rubber; [HSDB]

Antioxidant/antiozonant (rubber)

Antiozonant, antioxidant, and polymer stabilizer.

ANTIOZONANT & ANTIOXIDANT FOR BUTADIENE RUBBER

ANTIOZONANT & ANTIOXIDANT FOR NITRILE-BUTADIENE RUBBER

For more Uses (Complete) data for 1,4-BENZENEDIAMINE, N-(1,3-DIMETHYLBUTYL)-N'-PHENYL- (6 total), please visit the HSDB record page.

U.S. Imports · 2 items

(1979) 1.17X10+9 G (PRINCPL CUSTMS DISTS)

(1981) 7.92X10+7 G (PRINCPL CUSTMS DISTS)

U.S. Production · 3 items

2023: 55,000,000 - <70,000,000 lb

(1979) PROBABLY GREATER THAN 1.36X10+6 GRAMS

(1981) PROBABLY GREATER THAN 1.36X10+6 GRAMS

Consumer UsesAntioxidant
Industry UsesAntioxidant
Methods of Manufacturing · 3 items

REDUCTION OF EITHER P-NITRO- OR P-NITROSODIPHENYLAMINE TO FORM P-AMINODIPHENYLAMINE, FOLLOWED BY REACTION WITH 4-METHYL-2-PENTANONE & HYDROGENATION OVER A CATALYST

...reductive alkylation of p-phenylenediamine with methyl isobutyl ketone

Methyl isobutyl ketone + p-aminodiphenylamine (reductive amination)

Formulations/Preparations · 2 items

"Santoflex" /is/ trademark for a series of rubber antioxidants and antiozonants. /Santoflex/

WING-STAY IS TRADEMARK FOR SERIES OF PARAPHENYLENEDIAMINE DERIVATIVES USED AS STABILIZERS, ANTIOXIDANTS & ANTIOZONANTS FOR NATURAL & SYNTHETIC RUBBERS & LATICES. /WING-STAY/

General Manufacturing Information · 3 items

Rubber Product Manufacturing

Related reactions

5 records
New reaction record
HRID 66258 reaction equation
HRID 66258As product
HRID 310844 reaction equation
HRID 310844As product
HRID 831256 reaction equation
HRID 831256As reactant
HRID 2051583 reaction equation
HRID 2051583As reactant
HRID 2051584 reaction equation
HRID 2051584As reactant

Compound notes

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
212-344-0
Nikkaji
J21.253I

0.000005 [mmHg]

Vapor pressure at 25 °C: negligible

Physical Description · 4 items

N-(1,3-dimethylbutyl)-n'-phenyl-p-phenylenediamine is a purple flakes. (NTP, 1992)

Large Crystals; Liquid; Dry Powder; Liquid; Large Crystals; CBI; Large Crystals; Other Solid; Dry Powder; Other Solid

Dark violet solid; [HSDB] Brown to violet solid; Turns dark brown on light exposure; [ICSC]

BROWN-TO-VIOLET SOLID IN VARIOUS FORMS. TURNS DARK BROWN ON EXPOSURE TO LIGHT.

Autoignition Temperature~500 °C

Physicochemical properties

Melting point
45 · 45-46°C
Boiling point
260 °C · 260°C
Density
0.986 · 0.986~1.00g/cm3
refractive index
1.63 · 1.6300 (estimate)
Flash point
204 °C · 204°C
storage temp.
Keep in dark place,Sealed in dry,Room Temperature
solubility
soluble in Methanol
form
powder to lump
pka
6.73 · 6.73±0.32(Predicted)
color
Light orange to Dark red to Black
Water Solubility
0.1 g/100 · <0.1 g/100 mL at 17 ºC
Henry's Law Constant
2.9 · 2.9×103 mol/(m3Pa) at 25℃, Zhang et al. (2010)
InChI
InChI=1S/C18H24N2/c1-14(2)13-15(3)19-17-9-11-18(12-10-17)20-16-7-5-4-6-8-16/h4-12,14-15,19-20H,13H2,1-3H3
InChIKey
ZZMVLMVFYMGSMY-UHFFFAOYSA-N
SMILES
C1(NC(C)CC(C)C)=CC=C(NC2=CC=CC=C2)C=C1
CAS DataBase Reference
793 · 793-24-8(CAS DataBase Reference)
FDA UNII
0 U67PS1 · HJD0U67PS1
EPA Substance Registry System
N-(1,3-Dimethylbutyl)-N'-phenyl-p-phenylenediamine (793-24-8)
UNSPSC Code
12352116 · 12352116
NACRES
21 · NA.21
Symbol(GHS)
7 · GHS07,GHS09
Signal word
Warning
Hazard statements
302 · H302-H317-H410
Precautionary statements
261 · P261-P264-P273-P280-P301+P312-P302+P352
Hazard Codes
Xn,N
Risk Statements
22 · 22-43-50/53
Safety Statements
36 · 36/37-60-61
RIDADR
3077 · UN 3077 9 / PGIII
WGK Germany
2 · 2
RTECS
900000 · ST0900000
TSCA
TSCA listed
HazardClass
9 · 9
PackingGroup
III
HS Code
29215190 · 29215190
Storage Class
11 · 11 - Combustible Solids
Hazard Classifications
4 OralAquatic · Acute Tox. 4 OralAquatic Acute 1Aquatic Chronic 1Skin Sens. 1
Hazardous Substances Data
793 · 793-24-8(Hazardous Substances Data)
Toxicity
50 oral · LD50 oral in rat: 3580mg/kg
REACH Registrations
Active
Health Hazards
SYMPTOMS: Symptoms resulting from exposure to this compound include skin irritation and fatigue.
Hazards Summary · 1 item

Reports of skin sensitization in employees in tire and rubber industries; Not mutagenic in four strains of Salmonella and not clastogenic in mice bone marrow cells; Emergency treatment: Paraphenylenediamine; In sensitized individuals, paraphenylenediamine may cause allergic contact dermatitis following application as a hair dye and asthma following inhalation; Following ingestion, can cause angioneurotic edema, methemoglobinemia, acute tubular necrosis, and hepatotoxicity; An adult died after ingestion of 3 grams of p-phenylenediamine; Another adult who ingested 1800 mg developed angioneurotic edema and acute renal failure; [HSDB] A mild skin and eye irritant; May cause skin sensitization; [ICSC] May cause skin irritation and sensitization; [CAMEO] A mild skin and eye irritant; Likely a skin sensitizer based on animal studies and positive patch test results in volunteers exposed to rubber formulations; [CHEMINFO] See p-Phenylenediamine.

Reactive GroupAmines, Phosphines, and Pyridines
UN ClassificationUN Hazard Class: 9; UN Pack Group: III
Reactivity ProfileYou should protect N-(1,3-DIMETHYLBUTYL)-N'-PHENYL-P-PHENYLENEDIAMINE from exposure to strong oxidizing agents such as chlorine or hydrogen peroxide. This material will ignite if heated strongly. (NTP, 1992)
Chemical DangersDecomposes on burning. This produces toxic fumes including nitrogen oxides. Reacts with strong oxidants.
Air and Water ReactionsThis chemical may be sensitive to prolonged exposure to air. Insoluble in water.
Hazard Classes and Categories · 3 items

Acute Tox. 4 (80.1%)

Acute toxicity (Oral) - Category 4

Acute toxicity (Oral) - Category 4

Safety & protection

Fire Fighting · 2 items

Fires involving this material should be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)

Use water spray, powder.

First Aid Measures · 4 items

Fresh air, rest.

Remove contaminated clothes. Rinse and then wash skin with water and soap.

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

Rinse mouth. Refer for medical attention .

First Aid · 1 item

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

Safe StorageProvision to contain effluent from fire extinguishing. Store in an area without drain or sewer access. Separated from strong oxidants.
Exposure Control and Personal Protection2.0 [mg/m3], inhalable fraction[German Research Foundation (DFG)]
Nonfire Spill Response · 1 item

SMALL SPILLS AND LEAKAGE: Should a spill occur while you are handling this chemical, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with 60-70% ethanol and transfer the dampened material to a suitable container. Use absorbent paper dampened with 60-70% ethanol to pick up any remaining material. Seal the absorbent paper, and any of your clothes, which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with 60-70% ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.

Disposal Methods · 1 item

SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.

Spillage Disposal · 1 item

Personal protection: protective gloves and particulate filter respirator adapted to the airborne concentration of the substance. Do NOT let this chemical enter the environment. Sweep spilled substance into covered containers. If appropriate, moisten first to prevent dusting.

Isolation and EvacuationExcerpt from ERG Guide 171 [Substances (Low to Moderate Hazard)]:
Eye PreventionWear safety goggles.
Fire PreventionNO open flames.
Inhalation RiskA harmful concentration of airborne particles can be reached quickly when dispersed, especially if powdered.

Toxicology

Adverse EffectsOccupational hepatotoxin - Secondary hepatotoxins: the potential for toxic effect in the occupational setting is based on cases of poisoning by human ingestion or animal experimentation.
Exposure RoutesThe substance can be absorbed into the body by ingestion.
Signs and Symptoms · 3 items

Cough.

Redness.

Redness.

ICSC Environmental DataThe substance is very toxic to aquatic organisms. It is strongly advised not to let the chemical enter into the environment.
Human Toxicity Excerpts · 2 items

TEN AUTOMOBILE TIRES MFR BY 8 FIRMS INDUCED CONTACT SENSITIVITY IN 7 SUBJECTS ALLERGIC TO N-ISOPROPYL-N'-PHENYL-P-PHENYLENEDIAMINE ANTIOZONANT. N-(1,3-DIMETHYLBUTYL)-N'-PHENYL-P-PHENYLENEDIAMINE, AN ANTIOZONANT PURPORTED TO BE NONSENSITIZING, GAVE POS RESPONSES IN ALL PATIENTS ALLERGIC TO N-ISOPROPYL-N'-PHENYL-P-PHENYLENEDIAMINE.

The case of a 48 year old woman who had worked for 16 years in a rubber factory, in the quality control department of a rubber factory was discussed. Part of her work included the weighing of rubber chemicals, primarily in powdered form or as pellets. Although the patient wore leather gloves and a face mask, after a short period of time pruritus, erythema and vesicles developed on the uncovered skin of the hands and neck. Contact allergies were noted to N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine, 2,2,4-trimethyl-1,2-dihydroquinoline and also to N-isopropyl-N'-phenyl-p-phenylenediamine. When away from her work, the patient did heal, only to relapse on returning to the job.

Non-Human Toxicity Excerpts · 2 items

N-(1,3-Dimethylbutyl)-N'-phenyl-p-phenylenediamine was evaluated for mutagenicity in the Salmonella/microsome preincubation assay using a standard protocol approved by the National Toxicology Program. Doses of 0, 0.1, 0.3, 1, 3.3, 10, 33, 100, and 200 ug/plate were tested in four Salmonella typhimurium strains (TA98, TA100, TA1535, and TA1537) in the presence and absence of Aroclor-induced rat or hamster liver S9. These tests were negative and the highest ineffective dose level tested in all four Salmonella tester strains under all treatment conditions was 3.3 ug/plate. The four highest dose levels caused clearing of the background lawn.

N-(1,3-Dimethylbutyl)-N-phenylparaphenylenediamine is a derivative of phenylenediamine which is widely used in the rubber industry as an antioxidant. N-(1,3-Dimethylbutyl)-N-phenylparaphenylenediamine which is a strong allergen, is least studied for its clastogenic potency. This study evaluated the genotoxic property of DMPPD in Swiss albino mice bone marrow cells by using chromosomal aberration and micronuclei assay. Three concentrations of N-(1,3-dimethylbutyl)-N-phenylparaphenylenediamine, i.e., 100, 150 and 200 mg/kg body wt. did not significantly increase the micronuclei in polychromatic erythrocytes or the ratio of poly to normochromatic erythrocytes. Chromosome aberration studies using 100 mg and 200 mg/kg body wt. showed that N-(1,3-dimethylbutyl)-N-phenylparaphenylenediamine is a non-inducer of chromosome aberrations. The results indicated non-clastogenicity of N-(1,3-dimethylbutyl)-N-phenylparaphenylenediamine in mice marrow cells up to a concentration of 200 mg/kg bw under our experimental conditions.

Safety data

wgk
2
tsca
TSCA listed
rtecs
ST0900000
ridadr
UN 3077 9 / PGIII
hs_code
29215190
Toxicity
LD50 oral in rat: 3580mg/kg
risk_code
22-43-50/53
Signal word
Warning
Symbol(GHS)
GHS07,GHS09
hazard_code
Xn,N
safety_code
36/37-60-61
hazard_class
9
Storage Class
11 - Combustible Solids
packing_group
III
Hazard statements
H302-H317-H410
REACH Registrations
Active
Hazard Classifications
Acute Tox. 4 OralAquatic Acute 1Aquatic Chronic 1Skin Sens. 1
Precautionary statements
P261-P264-P273-P280-P301+P312-P302+P352
Hazardous Substances Data
793-24-8(Hazardous Substances Data)

1,4-Benzenediamine, N1-(1,3-dimethylbutyl)-N4-phenyl-: ACTIVE

Staining antidegradents that act as anti-flex-cracking agents and antiozonants

Applications · 3 items

Description6-PPD is a substituted p-phenylenediamine.1 It scavenges ozone, forming nitroxyl radicals.2 6-PPD decreases hatchability of zebrafish embryos by 25.6 and 78.9% when used at concentrations of 0.022 and 0.22 mg/L, respectively.1 It also reduces motility and body length, as well as induces developmental malformations and oxidative stress in, zebrafish embryos. Formulations containing 6-PPD have been used as stabilizing additives and antiozonants in rubber.WARNING This product is not for human or veterinary use.

UsesN-(1,3-Dimethylbutyl)-N'-phenyl-p-phenylenediamine is an anti-ozone and antioxidant for natural and synthetic rubber, offering excellent protection against ozone cracking and flexural fatigue, and inhibiting the harmful effects of metals such as copper and manganese. Its performance is similar to antioxidant 4010NA, but it is less toxic and less irritating to the skin, with lower water solubility loss (washing loss rate of 4010NA is 50%, while 4020 is only 15-20%). It can be widely used in tires, belts, and other industrial rubber products, typically at a dosage of 0.5-1.5%. Because it is a polluting antioxidant, it is not suitable for manufacturing light-colored products.

General DescriptionPurple flakes.

Upstream & downstream products

Upstream raw materials

4-AminophenolAnilineHydrogenIron4-Methyl-2-pentanone4-AminodiphenylaminePotassium sulfate