HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Compound

Dimethyl isophthalate

HCID 15088
New reaction
Print
Basic informationNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
1459-93-4
Standard SMILES
COC(=O)c1cccc(C(=O)OC)c1
InChIKey
VNGOYPQMJFJDLV-UHFFFAOYSA-N
Molecular formula
C10H10O4
Average molar mass
194.18 g/mol
Monoisotopic mass
194.0579088

Names & identifiers

Preferred name
Dimethyl isophthalate
IUPAC
dimethyl benzene-1,3-dicarboxylate
English name
Dimethyl isophthalate
Molecular formula
C10H10O4
Molecular weight
194.18

Names & synonyms

DIMETHYL ISOPHTHALATE1459-93-4Dimethyl m-phthalateMethyl isophthalateDimethyl benzene-1,3-dicarboxylateIsophthalic acid dimethyl esterMorflex 1129Dimethyl 1,3-benzenedicarboxylate1,3-Benzenedicarboxylic acid, dimethyl esterMethyl 3-(carbomethoxy)benzoateIsophthalic acid, dimethyl esterNSC 15313
Show more names
Dimethyl isophthalatUniplex 270RARECHEM AL BF 0071dimethylm-phthalate
1,3-Benzenedicarboxylic acid, 1,3-dimethyl esterDimethylester kyseliny isoftaloveHSDB 6138EINECS 215-951-9DTXSID8027402BRN 1912251Dimethylester kyseliny isoftalove [Czech]AI3-02247

Database identifiers

CAS
1459-93-4
PubChem CID
15088
DTXSID
DTXSID8027402
ChEMBL
CHEMBL2010300
UNII
2UY9Y3574K
EC Number
215-951-9
Nikkaji
J7.498E

Properties

Computed structural properties

XLogP
2.2
Topological polar surface area
52.6 Ų
Hydrogen bond donors
0
Hydrogen bond acceptors
4
Rotatable bonds
4
Heavy atoms
14
Formal charge
0
Complexity
202

Experimental & physicochemical properties

PolymersPlastics & Rubber -> Phthalate Esters
SpringerMaterials Properties13C nuclear magnetic resonance spectrum
Density1.194 g/cu cm at 20 °C
Color/Form · 2 items

Needles from dilute alcohol

... Solid at room temperature.

Solubility · 2 items

Slightly soluble in alcohol.

In water, 290 mg/L, temperature not specified

Flash Point280 °F (138 °C) (Closed cup)
Boiling Point282 °C
DecompositionWhen heated to decomp it emits acrid smoke and fumes.
Melting Point67.5 °C
Vapor Pressure · 2 items

0.00963 [mmHg]

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 5 items

This chemical does not meet GHS hazard criteria for 2% (3 of 152) of reports.

Warning

H319 (98%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]

P264+P265, P280, P305+P351+P338, and P337+P317 (click each P-code to see the statement)

Aggregated GHS information provided per 152 reports by companies from 4 notifications to the ECHA C&L Inventory.

Hazard information

Regulatory Information · 4 items

Chemical: 1,3-Benzenedicarboxylic acid, dimethyl ester

1,3-Benzenedicarboxylic acid, 1,3-dimethyl ester is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of 1,3-Benzenedicarboxylic acid, 1,3-dimethyl ester are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

REACH registered substance: Dimethyl isophthalate (EC: 215-951-9)

1,3-Benzenedicarboxylic acid, dimethyl ester: Does not have an individual approval but may be used under an appropriate group standard

Hazards SummaryA severe eye irritant after applying to rabbit eye for 26 hours; Oral LD50 (rat) = 4390 mg/kg; [HSDB] An irritant; [MSDSonline] See PHTHALATE ESTERS.
Special ReportsITC/USEPA; Information Review #304 (Draft) Dimethyl Isophthalate (1982)
NFPA Hazard Classification · 3 items

1 - Materials that, under emergency conditions, can cause significant irritation.

1 - Materials that must be preheated before ignition can occur. Materials require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur.

Chemistry & industry

Uses & manufacturing

Uses · 4 items

Used as a plasticizer, to make polyester resins, as a polyacrylate resin comonomer, and as a perfume fixative; [HSDB]

PLASTICIZER

CHEM INTERMED FOR POLYESTER RESINS

Polyacrylate resin comonomer; perfume fixative.

U.S. Production · 5 items

2023: 50,000 - <250,000 lb

(1979) PROBABLY GREATER THAN 2.27X10+6 G

(1981) PROBABLY GREATER THAN 2.27X10+6 G

1,3-Benzenedicarboxylic acid, dimethyl ester is listed as a High Production Volume (HPV) chemical (65FR81686). Chemicals listed as HPV were produced in or imported into the U.S. in >1 million pounds in 1990 and/or 1994. The HPV list is based on the 1990 Inventory Update Rule. (IUR) (40 CFR part 710 subpart B; 51FR21438).

Production volumes for non-confidential chemicals reported under the Inventory Update Rule. [Table#5716]

Industry UsesIntermediate
Methods of ManufacturingMethanol + isophthalic acid (esterification)
General Manufacturing Information · 3 items

Plastics Material and Resin Manufacturing

1,3-Benzenedicarboxylic acid, 1,3-dimethyl ester: ACTIVE

"Morflex 1129" [Reilly] ... trademark for chemical intermediate

Applications · 2 items

UsesDimethyl isophthalate is used as a plasticizer, to make polyester resins, as a polyacrylate resin comonomer, and as a perfume fixative. It may be used as an internal standard for determining, dimethyl-tere-phthalate (DMtP), dimethyl-phthalate (DMP), diethyl phthalate (DEP) in soil samples and biosolids using gas-chromatography coupled to mass spectrometry (GC-MS). It may also be used as an analytical reference standard for the quantification of the analyte in complex matrices including plastics, cosmetics, and environmental samples using gas chromatography coupled to positive chemical ionization mass spectrometry (GC-CIMS).

Related reactions

26 records
New reaction record
HRID 24300 reaction equation
HRID 24300As reactant
HRID 65888 reaction equation
HRID 65888As product
HRID 95837 reaction equation
HRID 95837As reactant
HRID 263215 reaction equation
HRID 263215As product
HRID 346470 reaction equation
HRID 346470As reactant
HRID 368921 reaction equation
HRID 368921As reactant
HRID 399846 reaction equation
HRID 399846As reactant
HRID 436392 reaction equation
HRID 436392As reactant
PreviousPage 1 of 4

Compound notes

On this pageBasic informationNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes

9.63X10-3 mm Hg at 25 °C /estimated/

Food Contact Substances · 2 items

FCS -> FDA Cumulative Estimated Daily Intake (CEDI)

FCS -> FDA Inventory of Food Contact Substances Listed in 21 CFR

Refractive IndexIndex of refraction: 1.5168 at 20 °C/D

Physicochemical properties

Melting point
64 · 64-68 °C (lit.)
Boiling point
124 °C · 124 °C (12.0016 mmHg)
Density
1.1477 · 1.1477
vapor density
6.8 · 6.8 (vs air)
vapor pressure
93.7 mm · 93.7 mm Hg ( 208 °C)
refractive index
1.5168 · 1.5168 (estimate)
Flash point
138 °C · 138 °C
storage temp.
Sealed in dry,Room Temperature
solubility
0.29 g/l · 0.29g/l insoluble
form
Flakes or Crystalline Powder
pka
-5.32 · -5.32[at 20 ℃]
color
White to off-white
Viscosity
4.9 cp · 4.9cp (70C)
Water Solubility
Insoluble
BRN
1912251 · 1912251
Henry's Law Constant
1.6 · 1.6×102 mol/(m3Pa) at 25℃, HSDB (2015)
InChI
1S/C10H10O4/c1-13-9(11)7-4-3-5-8(6-7)10(12)14-2/h3-6H,1-2H3
InChIKey
VNGOYPQMJFJDLV-UHFFFAOYSA-N
SMILES
COC(=O)c1cccc(c1)C(=O)OC
LogP
2.1 at · 2.1 at 20℃
CAS DataBase Reference
1459 · 1459-93-4(CAS DataBase Reference)
Indirect Additives used in Food Contact Substances
DIMETHYL ISOPHTHALATE
FDA 21 CFR
177.159 · 177.1590; 177.1630
FDA UNII
2 UY9Y3574K · 2UY9Y3574K
NIST Chemistry Reference
1 · 1,3-Benzenedicarboxylic acid dimethyl ester(1459-93-4)
EPA Substance Registry System
Dimethyl isophthalate (1459-93-4)
UNSPSC Code
85151701 · 85151701
NACRES
24 · NA.24
Symbol(GHS)
7 · GHS07
Signal word
Warning
Hazard statements
319 · H319
Precautionary statements
264 · P264-P280-P305+P351+P338-P337+P313
Hazard Codes
Xi
Risk Statements
36 · 36
Safety Statements
26 · 26-36
WGK Germany
3 · 3
RTECS
2540000 · NT2540000
TSCA
TSCA listed
HS Code
2917399090 · 2917399090
Storage Class
11 · 11 - Combustible Solids
Hazard Classifications
2 · Eye Irrit. 2
Hazardous Substances Data
1459 · 1459-93-4(Hazardous Substances Data)
REACH Registrations
Active

0 - Materials that in themselves are normally stable, even under fire conditions.

Hazard Classes and CategoriesEye Irrit. 2 (98%)

Safety & protection

Fire Fighting ProceduresWater or foam may cause frothing.
Disposal Methods · 1 item

SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational exposure or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal, aquatic, and plant life; and conformance with environmental and public health regulations.

Preventive Measures · 1 item

SRP: Local exhaust ventilation should be applied wherever there is an incidence of point source emissions or dispersion of regulated contaminants in the work area. Ventilation control of the contaminant as close to its point of generation is both the most economical and safest method to minimize personnel exposure to airborne contaminants.

Toxicology

Environmental Fate · 3 items

TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 36(SRC), determined from a structure estimation method(2), indicates that dimethyl isophthalate is expected to have very high mobility in soil(SRC). Volatilization of dimethyl isophthalate from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 6.1X10-8 atm-cu m/mole(SRC), using a fragment constant estimation method(3). Dimethyl isophthalate is not expected to volatilize from dry soil surfaces(SRC) based upon an estimated vapor pressure of 9.6X10-3 mm Hg(4). Dimethyl isophthalate, present at 100 mg/L, reached 94 to 102% of its theoretical BOD after 2 weeks using an activated sludge inoculum(5).

AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 36(SRC), determined from a structure estimation method(2), indicates that dimethyl isophthalate is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 6.1X10-8 atm-cu m/mole(SRC), developed using a fragment constant estimation method(4). According to a classification scheme(5), an estimated BCF of 4(SRC), from an estimated log Kow of 1.66(6) and a regression-derived equation(7), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Hydrolysis is not expected to be an important process(SRC) based on estimated hydrolysis half-lives of 350 and 35 days at pHs 7 and 8, respectively(8). Dimethyl isophthalate, present at 100 mg/L, reached 94 to 102% of its theoretical BOD after 2 weeks using an activated sludge inoculum(9).

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), dimethyl isophthalate, which has an estimated vapor pressure of 9.6X10-3 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase dimethyl isophthalate is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 25 days(SRC), calculated from its rate constant of 6.4X10-13 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Dimethyl isophthalate does contain chromophores that absorb at wavelengths >290 nm(4) and therefore may be susceptible to direct photolysis by sunlight(SRC).

Adverse EffectsOccupational hepatotoxin - Secondary hepatotoxins: the potential for toxic effect in the occupational setting is based on cases of poisoning by human ingestion or animal experimentation.
Soil Adsorption/Mobility · 1 item

Using a structure estimation method based on molecular connectivity indices(1), the Koc of dimethyl isophthalate can be estimated to be 36(SRC). According to a classification scheme(2), this estimated Koc value suggests that dimethyl isophthalate is expected to have very high mobility in soil.

Natural Pollution SourcesThe identification of dimethyl isophthalate in surface waters near, and shortly after the Mount St. Helens volcano erupted is believed to be due to the destructive pyrolysis of surrounding conifers and other organic matter(1).
Human Toxicity Excerpts · 1 item

/ALTERNATIVE and IN VITRO TESTS/ Comparative toxicity of phthalate esters to HeLa-S3 cells was studied by determining their effect on doubling time of the cells. The toxicity of the esters decreasing in order: diethyl phthalate, butyl phthalyl butyl glycolate, di-iso-butyl phthalate, ethyl phthalyl ethyl glycolate, bis(2-ethylhexyl) phthalate, dimethyl isophthalate, dibutyl phthalate, methyl phthalyl ethyl glycolate, dimethyl phthalate, and dioctyl phthalate.

Artificial Pollution SourcesDimethyl isophthalate's production and use as a polyacrylate resin comonomer and as a perfume fixative(1) may result in its release to the environment through various waste streams(SRC).
Environmental BiodegradationAEROBIC: Dimethyl isophthalate, present at 100 mg/L, reached 94 to 102% of its theoretical BOD after 2 weeks using an activated sludge inoculum(1).
Environmental Bioconcentration · 1 item

An estimated BCF of 4 was calculated in fish for dimethyl isophthalate(SRC), using an estimated log Kow of 1.66(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC).

Volatilization from Water/Soil · 1 item

The Henry's Law constant for dimethyl isophthalate is estimated as 6.1X10-8 atm-cu m/mole(SRC) using a fragment constant estimation method(1). This Henry's Law constant indicates that dimethyl isophthalate is expected to be essentially nonvolatile from water surfaces(2). Dimethyl isophthalate is not expected to volatilize from dry soil surfaces(SRC) based upon an estimated vapor pressure of 9.6X10-3 mm Hg(3).

Non-Human Toxicity Excerpts · 2 items

/LABORATORY ANIMALS: Acute Exposure/ Eye Rabbit 500 mg/26 hr severe toxic effects were observed.

/ALTERNATIVE and IN VITRO TESTS/ To assess the toxicity of dimethyl isophthalate to cells in culture, monolayers of L-cells and chicken embryos cells were overlaid with agar and undiluted dimethyl isophthalate was then applied to paper disks which had previously been placed on the agar overlay. Dimethyl isophthalate was scored as toxic since it created a zone of dead cells in the area adjacent to the test site.

Environmental Abiotic Degradation · 1 item

The rate constant for the vapor-phase reaction of dimethyl isophthalate with photochemically-produced hydroxyl radicals has been estimated as 6.4X10-13 cu cm/molecule-sec at 25 °C(SRC) using a structure estimation method(1). This corresponds to an atmospheric half-life of about 25 days at an atmospheric concentration of 5X10+5 hydroxyl radicals per cu cm(1). A base-catalyzed second-order hydrolysis rate constant of 0.23 L/mole-sec(SRC) was estimated using a structure estimation method(2); this corresponds to half-lives of 350 and 35 days at pH values of 7 and 8, respectively(2). Dimethyl isophthalate does contain chromophores that absorb at wavelengths >290 nm(3) and therefore may be susceptible to direct photolysis by sunlight(SRC).

Probable Routes of Human Exposure · 1 item

Occupational exposure to dimethyl phthalate may occur through inhalation of aerosols and dermal contact with this compound at workplaces where dimethyl isophthalate is produced or used. Use data indicate that the general population may be exposed to dimethyl isophthalate via dermal contact with and inhalation of products containing this compound. (SRC)

Safety data

wgk
3
tsca
TSCA listed
rtecs
NT2540000
hs_code
2917399090
risk_code
36
Signal word
Warning
Symbol(GHS)
GHS07
hazard_code
Xi
safety_code
26-36
Storage Class
11 - Combustible Solids
Hazard statements
H319
REACH Registrations
Active
Hazard Classifications
Eye Irrit. 2
Precautionary statements
P264-P280-P305+P351+P338-P337+P313
Hazardous Substances Data
1459-93-4(Hazardous Substances Data)

General DescriptionDimethyl isophthalate is dimethyl phthalate ester based plasticizer.

Preparation methods · 1 item

PreparationDimethyl isophthalate is synthesized by esterifying isophthalic acid with methanol: Isophthalic acid (1.66gm, 0.1mmol) in super dry methanol (60mL) containing 2-3 drops of concentrated H2SO4 (AR) was refluxed till it dissolved. Then, the reaction mixture was poured onto ice cold water, immediately a solid started separating from the clear solution. To this a solution of sodium bicarbonate was added till the effervescence seized. The ester thus obtained was filtered and washed with water for several times (M.P: 64-67°C).

Upstream & downstream products

Upstream raw materials

Isophthalic acid3-Carboxybenzaldehydemethyl 3-(5,5-dimethyl-1,3,2-dioxaborinan-2-yl)benzoateDimethyl 5-iodoisophthalateMethyl 3-chlorobenzoateMethanol

Downstream products

polyester-based liquid crystalling ionmer containing sulfonate groupMethyl 3-formylbenzoateIsophthaloyl dichlorideDiphenyl isophthalateDimethyl 5-bromoisophthalate1,3-Bis(chloromethyl)benzeneDimethyl 5-aminoisophthalate2-(3-(methoxycarbonyl)phenyl)acetic acid3,5-Bis(methoxycarbonyl)phenylboronic acid pinacol ester