HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Compound

Tetrabutyltin

HCID 15098
New reaction
Print
Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
1461-25-2
Standard SMILES
CCC[CH2][Sn]([CH2]CCC)([CH2]CCC)[CH2]CCC
InChIKey
AFCAKJKUYFLYFK-UHFFFAOYSA-N
Molecular formula
C16H36Sn
Average molar mass
347.2 g/mol
Monoisotopic mass
348.183904

Overview

Tetrabutyltin is an organotin compound. It is the starting material of the tributyltin and dibutyltin compounds, which are used as stabilizers for PVC, biocides, fungicides, and anti-biofouling agents. Tin is a chemical element with the symbol Sn and atomic number 50. It is a natural component of the earth's crust and is obtained chiefly from the mineral cassiterite, where it occurs as tin dioxide. (L307, L309, L314)

Names & identifiers

Preferred name
Tetrabutyltin
IUPAC
tetrabutylstannane
English name
Tetrabutyltin
Molecular formula
C16H36Sn
Molecular weight
347.17

Names & synonyms

TETRABUTYLTINTetrabutylstannane1461-25-2Tetra-n-butyltinStannane, tetrabutyl-Tin, tetrabutyl-Tetra-N-butylcinDTXSID4022153QJ7Y5V377VNSC-22330NSC-28131NSC-65524
Show more names
(C4H9)4Sntetrabutyl-tiTetrabutylzinnTIN TETRABUTYLTetrabutyltin>TETRABUTYLTIN(IV)
DTXCID102153RefChem:188425215-960-8Bu4SnTetra-n-butylstannaneTETRABUTYLTIN(IV)NCIOpen2_008184WLN: 4-SN-4&4&4

Database identifiers

CAS
1461-25-2
PubChem CID
15098
DTXSID
DTXSID4022153
UNII
QJ7Y5V377V
EC Number
215-960-8
Nikkaji
J1.768J

Properties

Computed structural properties

Topological polar surface area
0 Ų
Hydrogen bond donors
0
Hydrogen bond acceptors
0
Rotatable bonds
12
Heavy atoms
17
Formal charge
0
Complexity
116

Experimental & physicochemical properties

Chemical ClassesMetals -> Tin Compounds, Organic
OdorDistinct, characteristic odor
Density1.054 g/cu cm at 20 °C
Color/FormColorless or slightly yellow oily liquid
SolubilityInsol in water; sol in most organic solvents
Boiling Point145 °C @ 10 mm Hg
Decomposition · 2 items

When heated to decomposition it emits acrid smoke and fumes.

DECOMPOSES AT 265 °C

Melting Point-97 °C
Vapor Pressure · 2 items

0.0048 [mmHg]

0.0048 mm Hg at 20 °C

Refractive IndexIndex of refraction: 1.4727 @ 20 °C
Heat of Vaporization61.3 kJ/mol

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 6 items

Danger

H301 (86.3%): Toxic if swallowed [Danger Acute toxicity, oral]

P260, P264, P264+P265, P270, P273, P280, P301+P316, P301+P317, P302+P352, P305+P351+P338, P317, P319, P321, P330, P332+P317, P337+P317, P362+P364, P391, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 51 reports by companies from 9 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Warning

H317: May cause an allergic skin reaction [Warning Sensitization, Skin]

Hazard information

Regulatory Information · 4 items

Chemical: Stannane, tetrabutyl-

Stannane, tetrabutyl- is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Stannane, tetrabutyl- are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

REACH registered substance: Tetrabutyltin (EC: 215-960-8)

Tetrabutyltin: Does not have an individual approval but may be used under an appropriate group standard

Other Safety InformationIMAP assessments - Stannane, tetrabutyl-: Human health tier II assessment
Hazards Summary · 1 item

In lethal dose animal studies, causes somnolence (general depressed behavior); Oral LD50 (rat) = 1268 mg/kg; Intravenous LD50 (rat) = 48 mg/kg; [ChemIDplus] An irritant; [Hawley] An irritant; May cause skin and respiratory sensitization after prolonged contact; [MSDSonline] See ORGANOMETALS. See Tin, organic compounds.

Hazard Classes and Categories · 4 items

Acute Tox. 3 (86.3%)

Chemistry & industry

Pharmacology

Mechanism of Action · 1 item

Butyltin compounds inhibited the activity of purified yeast glucose-6-phosphate dehydrogenase in an in vitro system. The order of inhibitory effect was tetrabutyltin, dibutyltin, tributyltin and monobutyltin. The concentration of tetrabutyltin giving 50% inhibition of the yeast enzyme was 4.3ited by tributyltin but not by monobutyltin, dibutyltin or tetrabutyltin. Inhibition of glucose-6-phosphate dehydrogenase of yeast by tributyltin and tetrabutyltin was prevented by the addition of bovine serum albumin; inhibition of activity of the erythrocyte enzyme by tributyltin was not affected. Addition of albumin to the once inactivated enzyme did not restore enzyme activity. Cysteine slightly protected yeast enzyme from inhibition by dibutyltin but did not affect inhibition by tributyltin and tetrabutyltin.

Metabolism/Metabolites · 1 item

Though tin metal is very poorly absorbed, tin compounds may be absorbed via oral, inhalation, or dermal routes, with organotin compounds being much more readily absorbed than inorganic tin compounds. Tin may enter the bloodstream and bind to hemoglobin, where it is distributed and accumulates mainly in the kidney, liver, lung, and bone. Organotin compounds may undergo dealkylation, hydroxylation, dearylation, and oxidation catalyzed by cytochrome P-450 enzymes in the liver. The alkyl products of dealkylation are conjugated with glutathione and further metabolized to mercapturic acid derivatives. Tin and its metabolites are excreted mainly in the urine and feces. (L308)

Uses & manufacturing

Uses · 5 items

Used as a silicone additive, lubricant, fuel additive, polymerization catalyst, and hydrochloric acid scavenger; [Hawley]

Petroleum Production and Refining [Category: Industry]

Stabilizing and rust-inhibiting agent for silicones; lubricant and fuel additive; polymerization catalyst; hydrochloric acid scavenger

The major use for tetraorganotin cmpds is as (usually captive) intermediate for the tri-, di-, & monoorganotines.

Tetrabutyltin is the starting material of the tributyltin and dibutyltin compounds, which are used as stabilizers for PVC, biocides, fungicides, and anti-biofouling agents. (L314)

Related reactions

6 records
New reaction record
HRID 282736 reaction equation
HRID 282736As reactant
HRID 488073 reaction equation
HRID 488073As solvent
HRID 1583850 reaction equation
HRID 1583850As solvent
HRID 1678929 reaction equation
HRID 1678929As reactant
HRID 1678946 reaction equation
HRID 1678946As reactant
HRID 2130102 reaction equation
HRID 2130102As reactant

Compound notes

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Physical Description · 2 items

Liquid

Colorless or slightly yellow liquid; [Hawley] Colorless liquid; [MSDSonline]

Physicochemical properties

Melting point
-97 °C · -97 °C (lit.)
Boiling point
127 · 127-145 °C/10 mmHg (lit.)
Density
1.057 g/mL · 1.057 g/mL at 25 °C (lit.)
vapor pressure
0.0014 hPa · 0.0014 hPa (25 °C)
refractive index
20 · n20/D 1.473(lit.)
Flash point
225 °F · 225 °F
storage temp.
30 °C · Store below +30°C.
solubility
0.008 g/l · 0.008g/l
form
liquid
color
colorless
Specific Gravity
1.0572 · 1.0572
Water Solubility
insoluble
Hydrolytic Sensitivity
1 · 1: no significant reaction with aqueous systems
BRN
3648237 · 3648237
Henry's Law Constant
1.6 · 1.6×10-6 mol/(m3Pa) at 25℃, HSDB (2015)
Dielectric constant
9.74 · 9.7400000000000002
Exposure limits
0.1 mg/m3; · ACGIH: TWA 0.1 mg/m3; STEL 0.2 mg/m3 (Skin)NIOSH: IDLH 25 mg/m3; TWA 0.1 mg/m3
Stability
Stable. Incompatible with strong oxidizing agents. Combustible.
InChI
1S/4C4H9.Sn/c4*1-3-4-2;/h4*1,3-4H2,2H3;
InChIKey
AFCAKJKUYFLYFK-UHFFFAOYSA-N
SMILES
CCCC[Sn](CCCC)(CCCC)CCCC
LogP
5.07 at · 5.07 at 22℃
CAS DataBase Reference
1461 · 1461-25-2(CAS DataBase Reference)
EWG's Food Scores
1 · 1
FDA UNII
7 Y5V377V · QJ7Y5V377V
NIST Chemistry Reference
Stannane, tetrabutyl-(1461-25-2)
EPA Substance Registry System
Tetrabutyltin (1461-25-2)
UNSPSC Code
12352103 · 12352103
NACRES
23 · NA.23
Symbol(GHS)
6 · GHS06,GHS08,GHS09
Signal word
Danger
Hazard statements
331 · H331-H302-H315+H320-H361-H373-H336-H410
Precautionary statements
501 · P501-P273-P260-P270-P202-P201-P271-P264-P280-P302+P352-P391-P308+P313-P337+P313-P305+P351+P338-P362+P364-P332+P313-P301+P312+P330-P304+P340+P311-P403+P233-P405
target organs
thymus,spleen
PPE
Eyeshields, Faceshields, Gloves, type ABEK (EN14387) respirator filter
Hazard Codes
T,N
Risk Statements
21 · 21-25-36/38-48/23/25-50/53-48/23
Safety Statements
35 · 35-36/37/39-45-60-61
RIDADR
1760 · UN 1760 8/PG 2
WGK Germany
3 · 3
RTECS
8605000 · WH8605000
TSCA
TSCA listed
HazardClass
6.1 · 6.1(b)
PackingGroup
III
HS Code
29310095 · 29310095
Storage Class
6.1 C · 6.1C - Combustible acute toxic Cat.3toxic compounds or compounds which causing chronic effects
Hazard Classifications
1 Aquatic · Aquatic Acute 1Aquatic Chronic 1Eye Dam. 1Repr. 2Skin Irrit. 2Skin Sens. 1STOT RE 1
Hazardous Substances Data
1461 · 1461-25-2(Hazardous Substances Data)
Toxicity
50 orally · LD50 orally in Rabbit: 1268 mg/kg
REACH Registrations
Active
Limited Quantities
5 L · 5.0 L (1.3 gallons) (liquid) or 5.0 kg (11 lbs) (solid)
Excepted Quantities
Max Inner Pack (30g or 30ml) and Max Outer Pack (1Kg or 1L)

Eye damage - category 1

Serious eye damage/eye irritation - Category 2B

Skin sensitization - Category 1A

State Drinking Water Guidelines(MN) MINNESOTA 4000 ug/l /Tin/
Shipping Name/ Number DOT/UN/NA/IMO · 3 items

UN 3146; Organotin cmpd, solid, not otherwise specified

UN 2788; Organotin cmpd, liquid, not otherwise specified

IMO 6.1; Organotin cmpd, liquid or solid, not otherwise specified

Safety & protection

Exposure Control and Personal Protection0.02 [mg/m3], inhalable fraction[German Research Foundation (DFG)]
Disposal Methods · 1 item

SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.

Preventive Measures · 3 items

Clothing contaminated with ... tetrabutyltin ... should be placed in closed containers for storage until it can be discarded or until provision is made for the removal of contaminant from the clothing. If the clothing is to be laundered or otherwise cleaned to remove the contaminant, the person performing the operation should be informed of contaminant's hazard properties. ... Non-impervious clothing which becomes contaminated with ... tetrabutyltin ... should be removed promptly & not reworn until the contaminant is removed. ...

Skin that becomes contaminated with ... tetrabutyltin ... should be promptly washed or showered with soap or mild detergent & water to remove any contaminant. ... Eating & smoking should not be permitted in areas where ... tetrabutyltin ... is handled, processed, or stored.

SRP: The scientific literature for the use of contact lenses in industry is conflicting. The benefit or detrimental effects of wearing contact lenses depend not only upon the substance, but also on factors including the form of the substance, characteristics and duration of the exposure, the uses of other eye protection equipment, and the hygiene of the lenses. However, there may be individual substances whose irritating or corrosive properties are such that the wearing of contact lenses would be harmful to the eye. In those specific cases, contact lenses should not be worn. In any event, the usual eye protection equipment should be worn even when contact lenses are in place.

Threshold Limit Values (TLV) · 4 items

0.1 [mg/m3], as Sn

0.2 [mg/m3], as Sn

8 hr Time Weighted Avg (TWA): 0.1 mg/cu m; 15 min Short Term Exposure Limit (STEL): 0.2 mg/cu m, skin. /Tin, organic cmpd, as Sn/

A4; Not classifiable as a human carcinogen. /Tin, organic cmpd, as Sn/

Permissible Exposure Limit (PEL)0.1 [mg/m3], as Sn
Personal Protective Equipment (PPE) · 1 item

Employees should be provided with & required to use impervious clothing, gloves, face shields (8 inch minimum), & other appropriate protective clothing necessary to prevent repeated or prolonged skin contact with ... solid or liquid tetrabutyltin. ... Employees should be provided with & required to use dust- & splash-proof safety goggles where ... liquid tetrabutyltin ... may contact the eyes.

Immediately Dangerous to Life or Health (IDLH)25.0 [mg/m3], as Sn

Toxicology

Health EffectsBreathing or swallowing, or skin contact with organotins, can interfere with the way the brain and nervous system work, causing death in severe cases. Organic tin compounds may also damage the immune and reproductive system. (L307, L308)
Ecotoxicity Values · 2 items

LC50 Pimephales promelas (fathead minnow) 45.2 ug/l/96 hr (confidence limit 41.6 - 49.2 mg/l), flow-through bioassay with measured concentrations, 25.3 °C, dissolved oxygen 6.8 mg/l, hardness 44.3 mg/l calcium carbonate, alkalinity 44.1 mg/l calcium carbonate, and pH 7.7.

EC50 Pimephales promelas (fathead minnow) 45.2 ug/l/96 hr (confidence limit 41.6 - 49.2 mg/l), flow-through bioassay with measured concentrations, 25.3 °C, dissolved oxygen 6.8 mg/l, hardness 44.3 mg/l calcium carbonate, alkalinity 44.1 mg/l calcium carbonate, and pH 7.7. Effect: loss of equilibrium.

Environmental Fate · 3 items

TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 101,400(SRC), determined from a structure estimation method(2), indicates that tetra-n-butyl tin is expected to be immobile in soil(SRC). Volatilization of tetra-n-butyl tin from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 6 atm-cu m/mole(SRC), using a fragment constant estimation method(3). However, adsorption may attenuate this process. Tetra-n-butyl tin is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 0.0048 mm Hg(4). Tetrabutyltin may be susceptible to biodegradation in soil based upon possible biodegradability of other butyltin compounds such as tri-, di- and monobutyltin species(5).

AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 101,400(SRC), determined from a structure estimation method(2), indicates that tetra-n-butyl tin is expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon an estimated Henry's Law constant of 6 atm-cu m/mole(SRC), developed using a fragment constant estimation method(4). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 5 hrs and 7 days, respectively(SRC). However, volatilization from water surfaces is expected to be attenuated by adsorption to suspended solids and sediment in the water column. The estimated volatilization half-life from a model pond is 2.5 yrs if adsorption is considered(5). According to a classification scheme(6), an estimated BCF of 100(SRC), from an estimated log Kow of 9.4(7) and a regression-derived equation(8), suggests the potential for bioconcentration in aquatic organisms is moderate(SRC). Tetrabutyltin may be susceptible to biodegradation in water based upon possible biodegradability of other butyltin compounds such as tri-, di- and monobutyltin species(9).

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), tetra-n-butyl tin, which has a vapor pressure of 0.0048 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase tetra-n-butyl tin is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 7 hrs(SRC), calculated from its rate constant of 5.69X10-11 cu cm/molecule-sec at 25 °C(SRC) determined using a structure estimation method(3). It may be susceptible to direct photolysis based upon the absorption of UV light >290 nm by tri-, di-, and monobutyltin compounds(4), and should react with photochemically produced hydroxyl radicals.

Adverse EffectsNeurotoxin - Other CNS neurotoxin
Exposure RoutesOral (L308) ; inhalation (L308) ; dermal (L308)
Toxicity Summary · 1 item

Organotin compounds produce neurotoxic and immunotoxic effects. Organotins may directly activate glial cells contributing to neuronal cell degeneration by local release of pro-inflammatory cytokines, tumor necrosis factor-_, and/or interleukins. They may also induce apoptosis by direct action on neuronal cells. Organotin compounds stimulate the neuronal release of and/or decrease of neuronal cell uptake of neurotransmitters in brain tissue, including aspartate, GABA, glutamate, norepinephrine, and serotonin. This may be either a contributing factor to or result of the neuronal cell loss. The immunotoxic effects of organotins are characterized by thymic atrophy caused by the suppression of proliferation of immature thymocytes and apoptosis of mature thymocytes. Organotin compounds are believed to exert these effects by suppressing DNA and protein synthesis, inducing the expression of genes involved in apoptosis (such as nur77), and disrupting the regulation of intracellular calcium levels, giving rise to the uncontrolled production of reactive oxygen species, release of cytochrome c to the cytosol, and the proteolytic and nucleolytic cascade of apoptosis. The suppression of proliferation of immature thymocytes further results in the suppression of T-cell-mediated immune responses. Organotins are also endocrine disruptors and are believed to contribute to obesity by inappropriate receptor activation, leading to adipocyte differentiation. Inorganic tin triggers eryptosis, contributing to tin-induced anemia. (L308, A182, A184)

Signs and SymptomsInorganic or organic tin compounds placed on the skin or in the eyes can produce skin and eye irritation. (L308)
Soil Adsorption/Mobility · 1 item

Using a structure estimation method based on molecular connectivity indices(1), the Koc for tetra-n-butyl tin can be estimated to be 101,400(SRC). According to a classification scheme(2), this estimated Koc value suggests that tetra-n-butyl tin is expected to be immobile in soil.

Artificial Pollution SourcesTetra-n-butyl tin's production and use as a rust inhibitor and chemical intermediate(1) may result in its release to the environment through various waste streams(SRC).
Environmental Biodegradation · 1 item

Tetrabutyltin may be susceptible to biodegradation in water based upon possible biodegradability of other butyltin compounds such as tri-, di- and monobutyltin species(1), although no data concerning biodegradation of tetrabutyltin were located(SRC).

Sediment/Soil Concentrations · 1 item

SEDIMENT: Tetrabutyltin was detected and quantified in 1 of 235 samples of the top 2 cm of sediment from bodies of surface water in Canada sampled between 1982-1985 at concentration of 0.02 ppm Sn (dry wt); tetrabutyltin also was detected, not quantified in another 1 of the samples (concn range from approx 3.3 ppb Sn (dry wt) (limit of detection) to <0.01 ppm Sn (dry wt) (limit of quantitation))(1).

Carcinogen ClassificationNo indication of carcinogenicity to humans (not listed by IARC).

Regulatory information

State Drinking Water Guidelines(MN) MINNESOTA 4000 ug/l /Tin/

Safety data

PPE
Eyeshields, Faceshields, Gloves, type ABEK (EN14387) respirator filter
wgk
3
tsca
TSCA listed
rtecs
WH8605000
ridadr
UN 1760 8/PG 2
hs_code
29310095
Toxicity
LD50 orally in Rabbit: 1268 mg/kg
risk_code
21-25-36/38-48/23/25-50/53-48/23
Signal word
Danger
Symbol(GHS)
GHS06,GHS08,GHS09
hazard_code
T,N
safety_code
35-36/37/39-45-60-61
hazard_class
6.1(b)
Storage Class
6.1C - Combustible acute toxic Cat.3toxic compounds or compounds which causing chronic effects
packing_group
III
target organs
thymus,spleen
Hazard statements
H331-H302-H315+H320-H361-H373-H336-H410
Limited Quantities
5.0 L (1.3 gallons) (liquid) or 5.0 kg (11 lbs) (solid)
Excepted Quantities
Max Inner Pack (30g or 30ml) and Max Outer Pack (1Kg or 1L)
REACH Registrations
Active
Hazard Classifications
Aquatic Acute 1Aquatic Chronic 1Eye Dam. 1Repr. 2Skin Irrit. 2Skin Sens. 1STOT RE 1
Precautionary statements
P501-P273-P260-P270-P202-P201-P271-P264-P280-P302+P352-P391-P308+P313-P337+P313-P305+P351+P338-P362+P364-P332+P313-P301+P312+P330-P304+P340+P311-P403+P233-P405
Hazardous Substances Data
1461-25-2(Hazardous Substances Data)
U.S. Production2023: 10,000,000 - <25,000,000 lb
Consumer UsesNot Known or Reasonably Ascertainable
Industry UsesIntermediate
Methods of Manufacturing · 4 items

Reaction of tin tetrachloride with butyl magnesium chloride.

From activated magnesium chips, butyl chloride, and stannic chloride in a hydrocarbon mixture.

REACTION OF STANNIC CHLORIDE AND TRI-N-BUTYLALUMINUM IN THE PRESENCE OF COMPLEXING AGENTS SUCH AS SODIUM CHLORIDE, ETHERS, OR TERTIARY AMINES; REACTION OF STANNIC CHLORIDE AND N-BUTYLMAGNESIUM CHLORIDE; REACTION OF STANNIC CHLORIDE AND N-BUTYL CHLORIDE

Commercial mfr of organotins traditionally has involved alkylation of tin tetrachloride or the direct reaction of tin with alkyl halides. /Organotin cmpd/

General Manufacturing Information · 5 items

Plastics Product Manufacturing

Stannane, tetrabutyl-: ACTIVE

Organotin stabilizers are all derivatives of tetravalent tin. ... The organic groups bonded to tin are either alkyl or, substituted alkyl. Aryltin compounds have been shown to be poor stabilizers for polyvinyl chloride. /Organotin cmpd/

Among the most widely used preparations of tetraalkyl- and tetraaryltin compounds is the reaction of stannic chloride with tetrahydrofuran-based Grignard reagents or organoaluminum compounds. ... Organolithium and organosodium reagents can also be used to prepare tetraorganotins. ... The Wurtz reaction, which relies on in situ formation of an active organosodium species, is also useful for preparing tetraorganotin compounds and is practiced commercially. ... Unsymmetrical functional tetraorganotins are generally prepared by tin hydride addition (hydrostannation) to functional unsaturated organic compounds. /Tetraorganotin compounds/

COMMERCIAL ORGANOTIN COMPOUNDS USED AS STABILIZERS ARE OFTEN NOT CLEARLY IDENTIFIED AS TO THE EXACT ORGANOTIN, NOR IS INFORMATION GIVEN AS TO THE PRESENCE OF OTHER INGREDIENTS. ... /ORGANOTIN COMPOUNDS/

Applications

UsesTetra-n-butyltin is used in hydrogenolysis reactions and as a transition metal catalyst. It is also used stabilizers in the manufacture of polyvinyl chloride.

UsesTetrabutyltin, which is used in hydrogenolysis reactions and as a transition metal catalyst.

Upstream & downstream products

Downstream products

Dibutyltin oxideButyltin trichlorideMonobutyltin oxideDibutyltin dilaurateButylmercuri acetateDi-n-butyldifluorotinDibutyltin diacetate1-(benzo[d][1,3]dioxol-5-yl)pentan-1-one