HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Compound

Antimony pentachloride

HCID 24294
New reaction
Print
Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
7647-18-9
Standard SMILES
[Cl][Sb]([Cl])([Cl])([Cl])[Cl]
InChIKey
VMPVEPPRYRXYNP-UHFFFAOYSA-I
Molecular formula
Cl5Sb
Average molar mass
299 g/mol
Monoisotopic mass
295.74807

Overview

Antimony pentachloride, liquid appears as a reddish-yellow fuming liquid with a pungent odor. Fumes are irritating to the eyes and mucous membranes. Solidifies at 37 °F. Corrosive to metals and tissue. Used to make other chemicals, and in chemical analysis.

Names & identifiers

Preferred name
Antimony pentachloride
IUPAC
pentachloro-λ5-stibane
English name
ANTIMONY(V) CHLORIDE
Molecular formula
Cl5Sb
Molecular weight
299.02

Names & synonyms

ANTIMONY PENTACHLORIDEAntimony(V) chloride7647-18-9PentachloroantimonyAntimonpentachloridAntimony perchlorideAntimoonpentachlorideAntimony chloride (SbCl5)Perchlorure D'antimoinePentachlorure D'antimoineAntimonio (pentacloruro di)Antimoine (pentachlorure d')
Show more names
ANTIMONY CHLORIDEAntimoineAntimonioButter of antimonyAntimonic chlorideantimonyperchloride
DTXSID308930430S9308207LpentachlorostibaneRefChem:113168DTXCID801322994231-601-8SbCl5pentachloro-lambda5-stibane

Database identifiers

CAS
7647-18-9
PubChem CID
24294
DTXSID
DTXSID30893043
EC Number
231-601-8

Properties

Computed structural properties

Topological polar surface area
0 Ų
Hydrogen bond donors
0
Hydrogen bond acceptors
0
Rotatable bonds
0
Heavy atoms
6
Formal charge
0
Complexity
37.1

Experimental & physicochemical properties

Chemical Classes · 2 items

Metals -> Metalloid Compounds (Antimony)

Corrosives

OdorPungent; offensive
Density · 3 items

2.354 at 68 °F (USCG, 1999) - Denser than water; will sink

3.10 g/cu cm

2.336 @25 °C

Viscosity2.034 cP at 29.4 °C
Color/Form · 4 items

Colorless or yellow liquid

Colorless to yellow, oily liquid

Reddish yellow, oily liquid

White liquid or monoclinic crystals

Solubility · 3 items

Reacts with water

Soluble in an aqueous solution of tartaric acid in hydrochloric acid and chloroform

Soluble in hydrochloric acid, chloroform, carbon tetrachloride

CorrosivityCauses corrosion of metal
Boiling Point · 4 items

347 °F at 760 mmHg (est.) (USCG, 1999)

140 °C

BP: 69 °C at 18 mm Hg; 79 °C at 22 mm Hg; 92 °C at 30 mm Hg; 85 °C at 55 mm Hg; 102.5 °C at 68 mm Hg

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 6 items

Danger

H314: Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]

P260, P264, P273, P280, P301+P330+P331, P302+P361+P354, P304+P340, P305+P354+P338, P316, P321, P363, P391, P405, and P501 (click each P-code to see the statement)

Danger

H314 (100%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]

P260, P264, P273, P280, P301+P330+P331, P302+P361+P354, P304+P340, P305+P354+P338, P316, P321, P363, P391, P405, and P501 (click each P-code to see the statement)

Hazard information

Regulatory Information · 5 items

Chemical: Antimony chloride (SbCl5)

Antimony chloride (SbCl5) is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Antimony chloride (SbCl5) are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

REACH registered substance: Antimony pentachloride (EC: 231-601-8)

Antimony (V) chloride: Does not have an individual approval but may be used under an appropriate group standard

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

DOT Label · 2 items

Corrosive

Corrosive

Fire Hazards · 4 items

Behavior in Fire: Irritating fumes of hydrogen chloride given off when water or foam is used to extinguish adjacent fire. (USCG, 1999)

Excerpt from ERG Guide 157 [Substances - Toxic and/or Corrosive (Non-Combustible / Water-Sensitive)]:

· Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.

Chemistry & industry

Pharmacology

Metabolism/Metabolites · 1 item

Antimony is widely distributed throughout the body. The hair and skin contain the highest levels of antimony. The adrenal glands, lung, large intestine, trachea, cerebellum, and kidneys also contain relatively high levels of antimony. Blood is the main vehicle for the transport of absorbed antimony to various tissue compartments of the body. Antimony is a metal and, therefore, does not undergo catabolism. Antimony can covalently interact with sulfhydryl groups and phosphate, as well as numerous reversible binding interactions with endogenous ligands (e.g., proteins). It is not known if these interactions are toxicologically significant. Antimony is excreted via the urine and feces. Some of the fecal antimony may represent unabsorbed antimony that is cleared from the lung via mucociliary action into the esophagus to the gastrointestinal tract. (L741)

Absorption, Distribution and Excretion · 2 items

Following intraperitoneal injection in the rat, 88% of pentavalent antimony is excreted in the urine and 1% in the feces. ...A limited subchronic study gave weak indications of partly reversible damage to the lungs, heart, liver, kidneys and thyroid gland as well as accumulation of antimony in the spleen, heart, lymph nodes and thyroid gland, following inhalation exposure of rats to 0.037 mg antimony-V-chloride/L air, 2 hours/day for 4 months.

Distribution in rats after chronic poisoning by inhalation of antimony pentachloride showed high antimony concn in blood. Levels in liver, kidneys, spleen and pancreas were similar.

Uses & manufacturing

Uses · 6 items

Used as an organic catalyst and reagent (testing for alkaloids and cesium); [HSDB]

As catalyst when replacing a fluorine substituent with chlorine in organic compounds.

Antimony pentachloride is a strong Lewis acid and a useful chlorine carrier. Chlorine is lost in a number of chemical reactions resulting in the formation of adducts.

Analysis (testing for alkaloids and cesium), dyeing intermediates.

Polymerization catalyst.

Breathing air, drinking water, and eating foods that contain antimony. Exposure can also occur through dermal or skin contact (L741).

Related reactions

47 records
New reaction record
HRID 4740 reaction equation
HRID 4740As reactant
HRID 4741 reaction equation
HRID 4741As reactant
HRID 183637 reaction equation
HRID 183637As reactant
HRID 249406 reaction equation
HRID 249406As reactant
HRID 292634 reaction equation
HRID 292634As reactant
HRID 298998 reaction equation
HRID 298998As reactant
HRID 354618 reaction equation
HRID 354618As reactant
HRID 437452 reaction equation
HRID 437452As reactant
PreviousPage 1 of 6

Compound notes

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes

Boiling point: 68 °C at 1.82 kPa. Decomposes at atmospheric pressure, 101.3 kPa

Decomposition · 2 items

Decomposed by excess water into hydrochloric acid and antimony pentoxide.

When heated to decomp it emits very toxic fumes of /hydrogen chloride/ and antimony.

Melting Point · 3 items

37 °F (USCG, 1999)

4 °C

4 °C

Vapor Pressure · 3 items

1.0 [mmHg]

1 mm Hg at 22.7 °C

1 [mm Hg] @22.7 °C

Refractive IndexIndex of refraction: 1.5925 at 22 °C

Physicochemical properties

Melting point
2.8 °C · 2.8 °C(lit.)
Boiling point
92 °C30 · 92 °C30 mm Hg(lit.)
Density
2.36 g/mL · 2.36 g/mL at 25 °C(lit.)
vapor density
10.2 · >10.2 (vs air)
vapor pressure
0.13 psi · 0.13 psi ( 55 °C)
refractive index
1.601 · 1.601
Flash point
79 °C/22mm · 79°C/22mm
storage temp.
2 · 2-30°C
solubility
Soluble in HCl, chloroform, carbon tetrachlorideMiscible with chloroform, hydrochloric acid, tartaric acid, carbon disulfide and carbon tetrachloride.
form
Liquid
Specific Gravity
2.336 · 2.336
color
Red-yellow
Odor
offensive odor
Water Solubility
Soluble in water (react), chloroform, hydrochloric acid, and carbon tetrachloride.
Sensitive
Moisture Sensitive
Merck
14 · 14,695
Dielectric constant
3.22 · 3.2200000000000002
Stability
Stable, but reacts with moisture and water. Releases highly toxic fumes if involved in a fire.
InChI
1S/5ClH.Sb/h5*1H;/q;;;;;+5/p-5
InChIKey
VMPVEPPRYRXYNP-UHFFFAOYSA-I
SMILES
Cl[Sb](Cl)(Cl)(Cl)Cl
CAS DataBase Reference
7647 · 7647-18-9(CAS DataBase Reference)
EWG's Food Scores
1 · 1
FDA UNII
0 S9308207L · 0S9308207L
EPA Substance Registry System
Antimony pentachloride (7647-18-9)
UNSPSC Code
12352302 · 12352302
NACRES
23 · NA.23
Symbol(GHS)
5 · GHS05,GHS09
Signal word
Danger
Hazard statements
314 · H314-H411
Precautionary statements
260 · P260-P273-P280-P303+P361+P353-P304+P340+P310-P305+P351+P338
target organs
Respiratory system
PPE
Faceshields, Gloves, Goggles, type ABEK (EN14387) respirator filter
Hazard Codes
T,N,C
Risk Statements
34 · 34-51/53-40-23/24/25-14-62-48/20-63
Safety Statements
26 · 26-45-61-36/37/39-23
RIDADR
1730 · UN 1730 8/PG II (ANTIMONY PENTACHLORIDE, LIQUID)
WGK Germany
2 · 2
RTECS
5075000 · CC5075000
F
10 · 10
TSCA
TSCA listed
HazardClass
8 · 8
PackingGroup
II
HS Code
2827398520 · 2827398520
Storage Class
5.1 B · 5.1B - Oxidizing hazardous materials
Hazard Classifications
2 Eye · Aquatic Chronic 2Eye Dam. 1Ox. Liq. 2Skin Corr. 1BSTOT SE 3
Hazardous Substances Data
7647 · 7647-18-9(Hazardous Substances Data)
Toxicity
50 orl-rat: · LD50 orl-rat: 1115 mg/kg HYSAAV 29(12),16,64
REACH Registrations
Active
Limited Quantities
1 L · 1.0 L (0.3 gallons) (liquid) or 1 Kg (2.2 lbs) (solid)
Excepted Quantities
Max Inner Pack (30g or 30ml) and Max Outer Pack (500g or 500ml)

· Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.

Fire PotentialNot combustible
Health Hazards · 4 items

Inhalation causes irritation of nose and throat. Contact of liquid with eyes or skin causes severe burns. Ingestion causes vomiting and severe burns of mouth and stomach. Overexposure by any route can cause bloody stools, slow pulse, low blood pressure, coma, convulsions, cardiac arrest. (USCG, 1999)

Excerpt from ERG Guide 157 [Substances - Toxic and/or Corrosive (Non-Combustible / Water-Sensitive)]:

· TOXIC and/or CORROSIVE; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death.

· TOXIC and/or CORROSIVE; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death.

Hazards Summary · 1 item

A corrosive substance that can cause injury to the skin, eyes, and respiratory tract; May cause pulmonary edema; [HSDB] Reacts violently with water; A corrosive substance that can cause injury to the skin, eyes, and respiratory tract; Inhalation may cause chemical pneumonitis; [MSDSonline] See Antimony and linked occupational diseases.

DOT ID and Guide · 2 items

1731 157

1730 157

Reactive Group · 2 items

Acids, Strong Non-oxidizing

Acids, Strong Non-oxidizing

Reactivity Alerts · 2 items

Strong Oxidizing Agent

Strong Oxidizing Agent

OSHA StandardsPermissible Exposure Limit: Table Z-1 8-Hour Time Weighted Avg: 0.5 mg/cu m. /Antimony and compounds (as Sb)/
Reactivity Profile · 2 items

ANTIMONY PENTACHLORIDE is a strong oxidizing agent, and it is easily hydrolyzed to generate hydrochloric acid and antimony oxides.

ANTIMONY PENTACHLORIDE is a strong oxidizing agent, and it is easily hydrolyzed to generate hydrochloric acid and antimony oxides.

Atmospheric Standards · 1 item

Listed as a hazardous air pollutant (HAP) generally known or suspected to cause serious health problems. The Clean Air Act, as amended in 1990, directs EPA to set standards requiring major sources to sharply reduce routine emissions of toxic pollutants. EPA is required to establish and phase in specific performance based standards for all air emission sources that emit one or more of the listed pollutants. Antimony compounds are included on this list. /Antimony Componds/

Safety & protection

Fire Fighting · 2 items

Excerpt from ERG Guide 157 [Substances - Toxic and/or Corrosive (Non-Combustible / Water-Sensitive)]:

Excerpt from ERG Guide 157 [Substances - Toxic and/or Corrosive (Non-Combustible / Water-Sensitive)]:

Accidental Release Measures · 4 items

· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.

· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.

· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.

· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.

First Aid · 4 items

INHALATION: remove to clean air; rinse mouth and gargle with water; if overexposure is serious, get prompt medical attention.

Excerpt from ERG Guide 157 [Substances - Toxic and/or Corrosive (Non-Combustible / Water-Sensitive)]:

General First Aid:

General First Aid:

Firefighting HazardsHazardous decomposition products formed under fire conditions. - Hydrogen chloride gas, Antimony oxide
Exposure Control and Personal Protection · 2 items

· Wear positive pressure self-contained breathing apparatus (SCBA).

· Wear positive pressure self-contained breathing apparatus (SCBA).

Fire Fighting Procedures · 2 items

Suitable extinguishing media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Advice for firefighters: Wear self-contained breathing apparatus for firefighting if necessary.

Use appropriate extinguishing agents on nearby combustible fires. Use water spray to knock down acid vapors.

Storage Conditions · 3 items

Separate from acids, alkalies. Store in a cool, dry, well-ventilated location.

Storage temp: ambient; venting: pressure-vacuum.

Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store under inert gas. Reacts violently with water. Air sensitive.

Cleanup Methods · 1 item

ACCIDENTAL RELEASE MEASURES; Personal precautions, protective equipment and emergency procedures: Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. Methods and materials for containment and cleaning up: Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed containers for disposal.

Nonfire Spill Response · 2 items

Excerpt from ERG Guide 157 [Substances - Toxic and/or Corrosive (Non-Combustible / Water-Sensitive)]:

Excerpt from ERG Guide 157 [Substances - Toxic and/or Corrosive (Non-Combustible / Water-Sensitive)]:

Disposal Methods · 3 items

SRP: Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in air, soil or water; effects on animal, aquatic and plant life; and conformance with environmental and public health regulations. If it is possible or reasonable use an alternative chemical product with less inherent propensity for occupational harm/injury/toxicity or environmental contamination.

After the material has been contained, remove it and the contaminated soil and place in plastic-lined impervious containers. If practical, transport material back to the supplier or chemical company to recover the heavy-metal content and for deactivation. If this is not practical, or facilities not available, the material should be encapsulated and buried in a specially designated chemical landfill. Alternatively, material is amenable to biological treatment at a municipal sewage treatment plant when first chemically treated and neutralized.

Product: Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. Contaminated packaging: Dispose of as unused product.

Preventive Measures · 5 items

Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.

Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

Avoid inhalation of vapor or mist.

ACCIDENTAL RELEASE MEASURES; Personal precautions, protective equipment and emergency procedures: Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.

For more Preventive Measures (Complete) data for Antimony pentachloride (8 total), please visit the HSDB record page.

Isolation and Evacuation · 4 items

Excerpt from ERG Guide 157 [Substances - Toxic and/or Corrosive (Non-Combustible / Water-Sensitive)]:

Excerpt from ERG Guide 157 [Substances - Toxic and/or Corrosive (Non-Combustible / Water-Sensitive)]:

Immediate precautionary measure

Immediate precautionary measure

Toxicology

Treatment · 1 item

Following oral exposure to antimony, administer charcoal as a slurry (240 mL water/30 g charcoal). Following inhalation exposure, move patient to fresh air. Monitor for respiratory distress. If cough or difficulty breathing develops, evaluate for respiratory tract irritation, bronchitis, or pneumonitis. Administer oxygen and assist ventilation as required. Treat bronchospasm with inhaled beta2 agonist and oral or parenteral corticosteroids. In case of eye exposure, irrigate exposed eyes with copious amounts of room temperature water for at least 15 minutes. Following dermal exposure, remove contaminated clothing and wash exposed area thoroughly with soap and water. A physician may need to examine the area if irritation or pain persists. (T36)

Interactions · 1 item

Tumor necrosis factor-alpha (TNF-alpha) is a mediator of inflammation and has an important role in human and experimental renal diseases. Pentoxifylline (PTX) has been shown to inhibit cytokine synthesis, including TNF-alpha. The aim of the present study was to examine the effect of PTX on meglumine antimonate (Sb(V)) and antimony pentachloride (SbCl(5))-induced renal toxicity in rats. Sixty Wistar rats were divided into six groups according to the treatment employed over the period of 7 days: group I-saline (NaCl 0.9%); group II-PTX plus saline; group III-meglumine antimonate (Sb(V)) plus saline; group IV-meglumine antimonate (Sb(V)) plus PTX; group V-SbCl(5) plus saline; group VI-SbCl(5) with PTX. The animals' urinary concentration ability was evaluated before and after the end of the treatment. Urine and blood osmolality, sodium and creatinine concentration, and urine volume per minute (V) were determined. Creatinine clearance (CrCl), fractional sodium excretion (FE(Na)), and urine to plasma osmolality ratio (U/P osm) were calculated. TNF-alpha concentration in blood was assessed. On the seventh day, the animals were sacrificed and their kidneys were submitted to histological analysis. The meglumine antimonate (Sb(V))-treated animals showed an impaired renal capacity to concentrate urine, with low values of the ratio U/P osm, reduction in CrCl, and an increment in TNF-alpha serum levels. PTX associated with meglumine antimonate (Sb(V)) reduced TNF-alpha serum levels and was effective in preventing renal functional alterations. Rats treated with SbCl(5) showed functional and histopathologic alterations compatible with acute tubular necrosis, and treatment with PTX did not prevent SbCl(5)-induced nephrotoxicity. PTX was effective in preventing renal functional alterations induced by meglumine antimonate (Sb(V)) in rats.

Health Effects · 1 item

Dermal exposure to antimony can cause antimony spots (papules and pustules around sweat and sebaceous glands). Antimony poisoning can also lead to pneumoconiosis. Alterations in pulmonary function and other effects including chronic bronchitis, chronic emphysema, inactive tuberculosis, pleural adhesions, and irritation can result from inhalation of antimony. Increased blood pressure can also result from antimony poisoning. Myocardial depression, vasodilation and fluid loss may cause shock with hypotension, electrolyte disturbances and acute renal failure. Cerebral oedema, coma, convulsions, and death are possible. (L741)

Adverse EffectsDermatotoxin - Skin burns.
Exposure RoutesInhalation (L741) ; oral (L741) ; dermal (L741)
Toxicity Summary · 2 items

IDENTIFICATION AND USE: Antimony pentachloride is a colorless to yellow oily liquid. It is used as catalyst when replacing a fluorine substituent with chlorine in organic compounds. It is also used in analysis (testing for alkaloids and cesium), dyeing intermediates, as chlorine carrier in organic chlorinations. HUMAN STUDIES: Severe burns of cornea caused by exposure to high concentration of vapor. Inhalation causes coughing, choking, and variable symptoms of headache, dizziness, and weakness followed by pulmonary edema, difficult breathing, cyanosis, and bloody sputum. Skin contact causes severe burns. Burns heal slowly with scar formation. May produce anemia and bloody urine. Two deaths from antimony pentachloride poisoning have been reported. ANIMAL STUDIES: Antimony pentachloride is moderately toxic following acute oral exposure. Inhalation exposure of rats to 0.037 mg antimony pentachloride/L air, 2 hours/day for 4 months led to partly reversible damage to the lungs, heart, liver, kidneys and thyroid gland as well as accumulation of antimony in the spleen, heart, lymph nodes and thyroid gland. According to the available genotoxicity studies, antimony pentachloride was negative in the Salmonella/microsome test in strains TA 98 and TA 100 with and without metabolic activation, and did not increase the sister chromatid exchange rate in mammalian cells in vitro. Of three spot tests with antimony pentachloride in Bacillus subtilis, two were positive and one was negative.

The inhalation data suggest that the myocardium is a target of antimony toxicity. It is possible that antimony affects circulating glucose by interfering with enzymes of the glycogenolysis and gluconeogenesis pathways. The mechanism of action of antimony remains unclear. However, some studies suggest that antimony combines with sulfhydryl groups including those in several enzymes important for tissue respiration. The antidotal action of BAL depends on its ability to prevent or break the union between antimony and vital enzymes. Moreover, the The cause of death is believed to be essentially the same as that in acute arsenic poisoning. Antimony pentachloride reacts with water to form hydrochloric acid which has a direct corrosive effect on mucous membranes. (L793, T18, L741, A238)

Signs and Symptoms · 1 item

Abdominal pain, vomiting, diarrhea can result from inhalation of antimony. Dyspnea, headache, vomiting,cough, conjunctivitis, and bloody purulent discharge from nose can result from inhalation exposure. Skin or eye contact can cause pain and redness of the exposed surface. (T64, L741)

Human Toxicity Excerpts · 5 items

/SIGNS AND SYMPTOMS/ Severe burns of cornea ... caused by exposure to high concn of vapor ... .

/SIGNS AND SYMPTOMS/ Inhalation causes coughing, choking, and variable symptoms of headache, dizziness, and weakness followed by pulmonary edema, difficult breathing, cyanosis, and bloody sputum. Skin contact causes severe burns. Burns heal slowly with scar formation. May produce anemia and bloody urine.

/SIGNS AND SYMPTOMS/ Occupational exposures are usually by inhalation of dust containing ... antimony pentachloride ... . Effects may be acute, particularly from /pentachloride/ ... exposures, producing a rhinitis and even acute pulmonary edema.

/SIGNS AND SYMPTOMS/ In man, antimony-V-chloride is irritant or corrosive to the skin and mucous membranes of the respiratory tract and can cause pulmonary edema.

/CASE REPORTS/ The effects of poisoning with diborane, hydrogen-sulfide (H2S), chlorine, phosgene, carbon-monoxide, or antimony-pentachloride were examined in 55 patients with pulmonary edema. Most of the cases of intoxication resulted from accidental acute exposure to gaseous agents in industrial settings. Chlorine gas in low concentrations induced damage to the mucosa of the nose and throat because of the solubility of the gas in water. Greater concentrations gave rise to severe pulmonary congestion and edema due to the hydrolysis of chlorine to hydrochloric-acid in the parenchymal lung tissue. Phosgene produced irritation of the conjunctiva, nasal, and pharyngeal membranes at low concentrations. At higher exposures, bronchial, bronchiolar, and alveolar inflammatory reactions ensued. At low exposures to H2S, damage occurred in the conjunctiva, cornea, and pharyngeal membranes. A more prolonged exposure to low concentrations evoked damage to the respiratory tract and produced pulmonary edema. Following high exposure to H2S, central nervous system depression developed with respiratory and olfactory paralysis. All patients with diborane intoxication survived; there were two deaths from H2S poisoning and two deaths from antimony-pentachloride poisoning. All patients received oxygen therapy (at 60 to 80 percent), usually with intermittent positive pressure breathing. The authors conclude that narcotic agents should not be administered to patients with respiratory depression. Victims of poisonings such as those described should be treated in intensive care units.

Carcinogen ClassificationNo indication of carcinogenicity (not listed by IARC). (L135)
Non-Human Toxicity Excerpts · 4 items

/LABORATORY ANIMALS: Acute Exposure/ Antimony-V-chloride is moderately toxic following acute oral exposure (LD50 rat oral 1115 mg/kg body weight). According to an unclear citation in the literature, the 2-hour LC50 in the rat is 720 mg/cu m.

/LABORATORY ANIMALS: Subchronic or Prechronic Exposure/ A limited subchronic study gave weak indications of partly reversible damage to the lungs, heart, liver, kidneys and thyroid gland as well as accumulation of antimony in the spleen, heart, lymph nodes and thyroid gland, following inhalation exposure of rats to 0.037 mg antimony-V-chloride/L air, 2 hours/day for 4 months.

/GENOTOXICITY/ The rec, Salmonella mutagenicity, and sister chromatid exchange (SCE) assays were conducted to evaluate the genotoxicity of three beryllium, three gallium, and four antimony compounds. Fifty milligrams samples of beryllium-chloride (BeCl2), beryllium-nitrate (Be(NO3)2), beryllium-oxide ((BeO), gallium-chloride (GaCl3), gallium-nitrate (Ga(NO3)3), gallium-oxide (GaO3), antimony-chloride (SbCl3), antimony-oxide (Sb2O3), antimony-pentachloride (SbCl5), and antimony-pentoxide (Sb2O5) were dissolved in distilled water and diluted serially two fold for the assays; both negative and positive controls were used. The rec assays involved spores of Bacillus-subtilis-M45 and Bacillus-subtilis-H17 and the SCE assays involved V79-Chinese-hamster cells. The Salmonella mutagenicity assays used the (TA100) and (TA98) strains and were conducted in the presence of rat liver-S9. In the rec assay, DNA damaging activity was exhibited by BeCl2, Be(NO3)2, GaCl3, Ga(NO3)3, SbCl3, SbCl5, and Sb2O3. None of the tested compounds were mutagenic to Salmonella and only SbCl3, Sb3O3, BeCl2, and Be(NO3)2 significantly induced sister chromatid exchanges. One of the antimony(III) compound, Sb2O3, was positive in both the rec and SCE assays at very low doses.

/GENOTOXICITY/ According to the available genotoxicity studies, antimony-V-chloride is negative in the Salmonella/microsome test in strains TA 98 and TA 100 with and without metabolic activation, and does not increase the sister chromatid exchange rate in mammalian cells in vitro. Of three spot tests with antimony-V-chloride in Bacillus subtilis, two were positive and one was negative. Overall, the genotoxic potential of the substance cannot be evaluated based on these studies.

Antidote and Emergency Treatment · 4 items

Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR if necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on the left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. /Poisons A and B/

Basic treatment: Establish a patent airway (oropharyngeal or nasopharyngeal airway, if needed). Suction if necessary. Watch for signs of respiratory insufficiency and assist ventilations if needed. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Monitor for pulmonary edema and treat if necessary ... . Monitor for shock and treat if necessary ... . Anticipate seizures and treat if necessary ... . For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with 0.9% saline (NS) during transport ... . Do not use emetics. For ingestion, rinse mouth and administer 5 mL/kg up to 200 mL of water for dilution if the patient can swallow, has a strong gag reflex, and does not drool ... . Cover skin burns with dry sterile dressings after decontamination ... . /Poisons A and B/

Advanced treatment: Consider orotracheal or nasotracheal intubation for airway control in the patient who is unconscious, has severe pulmonary edema, or is in severe respiratory distress. Positive-pressure ventilation techniques with a bag-valve-mask device may be beneficial. Consider drug therapy for pulmonary edema ... . Consider administering a beta agonist such as albuterol for severe bronchospasm ... . Monitor cardiac rhythm and treat arrhythmias as necessary ... . Start IV administration of D5W /SRP: "To keep open", minimal flow rate/. Use 0.9% saline (NS) or lactated Ringer's if signs of hypovolemia are present. For hypotension with signs of hypovolemia, administer fluid cautiously. Watch for signs of fluid overload ... . Treat seizures with diazepam or lorazepam ... . Use proparacaine hydrochloride to assist eye irrigation ... . /Poisons A and B/

Call for medical aid. ... Move victim to fresh air. If breathing has stopped, give artificial respiration. If breathing is difficult, give oxygen. ... Remove contaminated clothing and shoes. Flush affected areas with plenty of water. If in eyes, hold eyelids open and flush with plenty of water. If swallowed and victim is conscious, have victim drink water or milk. Do not induce vomiting.

Toxicity Data · 2 items

LC50 (rat) = 720 mg/m3/2h

LD50: 1115 mg/kg (Oral, Rat) (L792) LD50: 900 mg/kg (Oral, Guinea pig) (L792)

Regulatory information

Atmospheric Standards · 1 item

Listed as a hazardous air pollutant (HAP) generally known or suspected to cause serious health problems. The Clean Air Act, as amended in 1990, directs EPA to set standards requiring major sources to sharply reduce routine emissions of toxic pollutants. EPA is required to establish and phase in specific performance based standards for all air emission sources that emit one or more of the listed pollutants. Antimony compounds are included on this list. /Antimony Componds/

CERCLA Reportable Quantities · 1 item

Persons in charge of vessels or facilities are required to notify the National Response Center (NRC) immediately, when there is a release of this designated hazardous substance, in an amount equal to or greater than its reportable quantity of 1000 lb or 454 kg. The toll free number of the NRC is (800) 424-8802. The rule for determining when notification is required is stated in 40 CFR 302.4 (section IV. D.3.b).

Clean Water Act Requirements · 2 items

Antimony pentachloride is designated as a hazardous substance under section 311(b)(2)(A) of the Federal Water Pollution Control Act and further regulated by the Clean Water Act Amendments of 1977 and 1978. These regulations apply to discharges of this substance. This designation includes any isomers and hydrates, as well as any solutions and mixtures containing this substance.

Toxic pollutant designated pursuant to section 307(a)(1) of the Federal Water Pollution Control Act and is subject to effluent limitations. /Antimony and compounds/

Safety data

F
10
PPE
Faceshields, Gloves, Goggles, type ABEK (EN14387) respirator filter
wgk
2
tsca
TSCA listed
rtecs
CC5075000
ridadr
UN 1731 8/PG II/III (ANTIMONY PENTACHLORIDE SOLUTION)
hs_code
2827398520
Toxicity
LD50 orl-rat: 1115 mg/kg HYSAAV 29(12),16,64
risk_code
34-51/53-40-23/24/25-14-62-48/20-63
Signal word
Danger
Symbol(GHS)
GHS05,GHS09
hazard_code
T,N,C
safety_code
26-45-61-36/37/39-23
hazard_class
8
Storage Class
5.1B - Oxidizing hazardous materials
packing_group
II
target organs
Respiratory system
Hazard statements
H314-H411
Limited Quantities
1.0 L (0.3 gallons) (liquid) or 1 Kg (2.2 lbs) (solid)
Excepted Quantities
Max Inner Pack (30g or 30ml) and Max Outer Pack (500g or 500ml)
REACH Registrations
Active
Hazard Classifications
Aquatic Chronic 2Eye Dam. 1Ox. Liq. 2Skin Corr. 1BSTOT SE 3
Precautionary statements
P260-P273-P280-P303+P361+P353-P304+P340+P310-P305+P351+P338
Hazardous Substances Data
7647-18-9(Hazardous Substances Data)
U.S. Production2023: 50,000 - <250,000 lb
Industry UsesCatalyst
Methods of Manufacturing · 3 items

It can be produced by saturating molten antimony trichloride with chlorine, followed by vacuum distillation.

Other methods are the direct chlorination of antimony and the chlorination of antimony oxides or sulfides.

Action of chlorine on antimony powder

General Manufacturing Information · 4 items

Industrial Gas Manufacturing

Antimony chloride (SbCl5): ACTIVE

Laboratory procedure: Schenck in Handbook of Preparative Inorganic Chemistry, G Brauer, ed (Academic Press, NY, 2nd ed, 1963), p 610

Antimony can be trivalent or pentavalent in compounds. Both exist in antimony(IV) oxide, Sb2O4, and presumably in the deep violet haloantimonates (IV), such as Cs2(SbCl6). The pentavalent compounds, as well as most of the trivalent ones, are hydrolyzed by water to form antimony salts, e.g., SbOCl, and hydrated oxides. The only halides of antimony that have any industrial significance are the chlorides and fluorides. /Antimony compounds/

Applications · 4 items

DescriptionAntimony pentachloride is a noncombustible,colorless to reddish-yellow oily liquid with an offensive odor.Molecular weight= 299.05; Boiling point= 77℃ (decomposes); Freezing/Melting point= 3℃; Specific gravity(H2O:1)= 2.354 at 20℃; Liquid surface tension= (estimate) 50.015 N/m at 20℃; Latent heat of vaporization=1.60 3 105 J/kg; Heat of solution=2 4.925 3 105 J/kg;Vapor pressure: 0.84 mmHg at 20℃. Hazard Identification(based on NFPA-704 M Rating System): (solid or liquid)Health 3, Flammability 0, Reactivity 1. Decomposes on contact with water.

UsesAntimony(V) chloride is used as a catalyst and an analytical reagent for testing alkaloids and cesium. It is also used as a polymerization catalyst as well as involved in the chlorination of organic compounds. It acts as a Lewis acid and a strong oxidizing agent.

UsesAs catalyst when replacing a fluorine substituent with chlorine in organic compounds.

General DescriptionA reddish-yellow fuming liquid with a pungent odor. Fumes are irritating to the eyes and mucous membranes. Solidifies at 37°F. Corrosive to metals and tissue. Used to make other chemicals, and in chemical analysis.

Upstream & downstream products

Upstream raw materials

AntimonyArsenic trichlorideAntimonyAntimony trichlorideBlockANTIMONY PENTAFLUORIDENitrosyl chloride

Downstream products

1,2-DifluorotetrachloroethaneAntimonySodium antimonate2-ChlorobenzotrifluorideTrichlorofluoromethaneDichlorodifluoromethaneDifluorochloromethaneAntimony trichlorideChlorotrifluoromethanesodium antimonate hydrate,electronic gradeIsoflurane1,1,2,2-TetrachloroethaneSulphurmonofluoridePYROSULFURYL CHLORIDE4-Chlorobenzotrichloride4-Chlorobenzyl chloride