HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Compound

Mercuric sulfate

HCID 24544
New reaction
Print
Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
7783-35-9
Standard SMILES
O=S(=O)([O-])[O-].[Hg+2]
InChIKey
DOBUSJIVSSJEDA-UHFFFAOYSA-L
Molecular formula
HgSO4
Average molar mass
296.66 g/mol
Monoisotopic mass
297.92237248

Overview

Mercuric sulfate appears as odorless white granules or crystalline powder. Denser than water. It is toxic by inhalation and by ingestion. It is used in medicine, for gold and silver extraction, and to make other mercury compounds.

Names & identifiers

Preferred name
Mercuric sulfate
IUPAC
mercury(2+) sulfate
English name
MERCURY(II) SULFATE
Molecular formula
HgO4S
Molecular weight
296.65

Names & synonyms

Mercury(II) sulfateMERCURIC SULFATE7783-35-9mercury sulfateMercury bisulfateMercury disulfateMercuric sulphateMercury persulfateSulfate mercuriqueMercury sulfate (HgSO4)Mercury(II) sulfate (1:1)Mercury(II) sulphate
Show more names
DENIGES' REAGENTmercurypersulfatesulfatemercuriqueMERCURY(+2)SULFATEMercuricSulphateGr
Sulfuric acid, mercury(2+) salt (1:1)J4L3PPG58IMERCURIUS SULPHURICUSDTXSID7064819BURNING DIARRHEARefChem:55588mercury(2+) ion sulfateDTXCID8048020

Database identifiers

CAS
7783-35-9
PubChem CID
24544
DTXSID
DTXSID7064819
UNII
J4L3PPG58I
EC Number
231-992-5
Nikkaji
J53.684I

Properties

Computed structural properties

Topological polar surface area
88.6 Ų
Hydrogen bond donors
0
Hydrogen bond acceptors
4
Rotatable bonds
0
Heavy atoms
6
Formal charge
0
Complexity
62.2

Experimental & physicochemical properties

Chemical Classes · 2 items

Metals -> Mercury Compounds, Inorganic

Reactive agents - 1st degree

OdorOdorless
Density · 4 items

6.47 at 68 °F (USCG, 1999) - Denser than water; will sink

6.47

6.5 g/cm³

6.47 @25 °C

Color/Form · 2 items

White granules or crystalline powder

COLORLESS, RHOMBIC CRYSTALS

Solubility · 4 items

Sol in hydrochloric acid, hot dil sulfuric acid, concentrated sodium chloride

INSOL IN ALCOHOL, ACETONE, AMMONIA

Reacts with water

Solubility in water: reaction

Corrosivity · 2 items

Corrosiveness: Magnesium; Aluminum; Zinc; Iron; Lead; Copper

Sulfate ion corrosive to pipes and fittings.

Decomposition450 °C. This produces very toxic fumes of mercury and sulfur oxides. The solution in water is a medium strong acid. Reacts with hydrogen halides. Attacks metal in the presence of moisture.

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 6 items

This chemical does not meet GHS hazard criteria for 1% (2 of 201) of reports.

Danger

H300+H310+H330 (58.2%): Fatal if swallowed, in contact with skin or if inhaled [Danger Acute toxicity, oral; acute toxicity, dermal; acute toxicity, inhalation]

P260, P262, P264, P270, P271, P273, P280, P284, P301+P316, P302+P352, P304+P340, P316, P319, P320, P321, P330, P361+P364, P391, P403+P233, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 201 reports by companies from 17 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Danger

Hazard information

Regulatory Information · 5 items

Chemical: Sulfuric acid, mercury(2+) salt (1:1)

12C - indicates a substance that is prohibited to be exported from the Unites States under TSCA section 12(c).

Status: Active Update: 17-05-2018 https://echa.europa.eu/registration-dossier/-/registered-dossier/17677

Mercury (II) sulphate: HSNO Approval: HSR004551 Approved with controls

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

Other Safety InformationIMAP assessments - Sulfuric acid, mercury(2+) salt (1:1): Human health tier II assessment
DOT LabelPoison
Fire Hazards · 3 items

Special Hazards of Combustion Products: None (USCG, 1999)

· Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.

Not combustible. Gives off irritating or toxic fumes (or gases) in a fire.

Chemistry & industry

Pharmacology

Metabolism/Metabolites · 1 item

Mercury is absorbed mainly via ingestion and inhalation, then distributed throughout the body via the bloodstream, where a portion binds to sulfhydryl groups on haemoglobin. Mercury can undergo oxidation to mercuric mercury, which takes place via the catalase-hydrogen peroxide pathway. The mercury atom is able to diffuse down the cleft in the catalase enzyme to reach the active site where the heme ring is located. Oxidation most likely occurs in all tissue, as the catalase hydrogen peroxide pathway is ubiquitous. Following oxidation, mercury tends to accumulate in the kidneys. Mercury is excreted mainly by exhalation and in the faeces. (A6, L7)

FDA Pharmacological Classification · 2 items

MERCURIUS SULPHURICUS

Increased Large Intestinal Motility [PE]; Osmotic Laxative [EPC]; Inhibition Large Intestine Fluid/Electrolyte Absorption [PE]; Osmotic Activity [MoA]

Absorption, Distribution and ExcretionCHEM ANALYSES SHOWING ACCUMULATION OF MERCURY IN LENS /OF EYE/ IN MERCURIALENTIS HAVE BEEN REPORTED.

Uses & manufacturing

Uses · 6 items

Used as a battery electrolyte, gold and silver extractant, and chemical reagent; [Merck Index]

Battery Manufacturing [Category: Industry]

Electrolyte for primary batteries; with sodium chloride for extracting gold and silver from roasted pyrites; as reagent for wine coloring, barbital, and cysteine.

Reagent for preparation of calomel and corrosive sublimate, catalyst in the conversion of acetylene to acetaldehyde

Used in analytical chemistry to bind chloride ions in the determination of the COD of waste water; as a catalyst in the production of acetaldehyde depolarizer in galvanic elements.

Mercury(II) sulfate is used mainly as a catalyst in the production of acetaldehyde. (L446)

Methods of Manufacturing · 2 items

Related reactions

15 records
New reaction record
HRID 231227 reaction equation
HRID 231227As catalyst
HRID 231229 reaction equation
HRID 231229As catalyst
HRID 231239 reaction equation
HRID 231239As catalyst
HRID 273909 reaction equation
HRID 273909As catalyst
HRID 354177 reaction equation
HRID 354177As catalyst
HRID 354191 reaction equation
HRID 354191As catalyst
HRID 513128 reaction equation
HRID 513128As catalyst
HRID 642377 reaction equation
HRID 642377As catalyst
PreviousPage 1 of 2

Compound notes

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Physical Description · 3 items

Mercuric sulfate appears as odorless white granules or crystalline powder. Denser than water. It is toxic by inhalation and by ingestion. It is used in medicine, for gold and silver extraction, and to make other mercury compounds.

White crystals; [ICSC]

WHITE CRYSTALLINE POWDER.

Other Experimental Properties · 3 items

Decomp by water into yellow insol, basic sulfate, and free sulfuric acid.

Decomp in water, and at red heat

Heat of fusion: 4.8 cal/g

Physicochemical properties

Melting point
°Cd ec.)
Boiling point
615.95 ℃ · 615.95℃
Density
6.47 · 6.47
bulk density
670 kg/m3 · 670kg/m3
vapor pressure
0 Pa · 0Pa at 25℃
storage temp.
Store at RT.
solubility
Soluble in hot sulfuric acid and sodium chloride solution. Insoluble in alcohol, acetone and ammonia.
form
Powder
color
White to pale yellow
Specific Gravity
6.47 · 6.47
Odor
Odorless
PH
1 · 1 (50g/l, H2O, 20℃)
Water Solubility
2 O · decomposed in H2O to yellow insoluble basic sulfate and H2SO4; soluble HCl, hot dilute H2SO4, conc NaCl solution [MER06]
Sensitive
Hygroscopic
Merck
14 · 14,5887
Exposure limits
0.025 mg/m3 · ACGIH: TWA 0.025 mg/m3 (Skin)NIOSH: IDLH 10 mg/m3; TWA 0.05 mg/m3; Ceiling 0.1 mg/m3
Stability
Unstable. Incompatible with strong acids. Light and heat sensitive.
InChI
1S/Hg.H2O4S/c;1-5(2,3)4/h;(H2,1,2,3,4)/q+2;/p-2
InChIKey
DOBUSJIVSSJEDA-UHFFFAOYSA-L
SMILES
[Hg++].[O-]S([O-])(=O)=O
LogP
-0.07 at · -0.07 at 25℃
CAS DataBase Reference
7783 · 7783-35-9(CAS DataBase Reference)
FDA UNII
4 L3PPG58I · J4L3PPG58I
EPA Substance Registry System
Mercuric sulfate (7783-35-9)
UNSPSC Code
12352302 · 12352302
NACRES
21 · NA.21
Symbol(GHS)
6 · GHS06,GHS09
Signal word
Danger
Hazard statements
300 · H300-H311-H410
Precautionary statements
264 · P264-P270-P280-P273-P301+P310-P330-P302+P352-P312-P361+P364-P391-P405-P501
target organs
Kidney
Hazard Codes
T+,N,T
Risk Statements
26 · 26/27/28-33-50/53-51/53-42/43-36/38-61-60-46-45-52/53-35-23/24/25
Safety Statements
13 · 13-28-45-60-61-36/37-26-23-53-36/37/39-30
RIDADR
1645 · UN 1645 (MERCURY SULPHATE)
WGK Germany
3 · 3
RTECS
500000 · OX0500000
Autoignition Temperature
450 °C · >450 °C
TSCA
TSCA listed
HazardClass
6.1 · 6.1
PackingGroup
II
HS Code
28521000 · 28521000
Storage Class
6.1 A · 6.1A - Combustible acute toxic Cat. 1 and 2very toxic hazardous materials
Hazard Classifications
1 DermalAcute · Acute Tox. 1 DermalAcute Tox. 2 InhalationAcute Tox. 2 OralAquatic Acute 1Aquatic Chronic 1STOT RE 2
Hazardous Substances Data
7783 · 7783-35-9(Hazardous Substances Data)
REACH Registrations
Active
Limited Quantities
0.5 Kg · 0.5 Kg (solid)
Excepted Quantities
Max Inner Pack (1g or 1ml) and Max Outer Pack (500g or 500ml)
Health Hazards · 2 items

INHALATION: Acute poisoning: Tightness in chest, breathing difficulty, coughing, and pain. EYES: Ulceration of conjunctiva and cornea. SKIN: Irritation; may cause sensitization dermatitis. INGESTION: Necrosis, pain, vomiting, severe purging. Patient may die within a few hours from peripheral vascular collapse. (USCG, 1999)

· Highly toxic, may be fatal if inhaled, ingested or absorbed through skin.

Hazards SummaryA corrosive substance that can cause injury to the skin, eyes, and respiratory tract; Can cause injury to the kidneys and central and peripheral nervous systems; [ICSC] See Mercury, inorganic compounds and the linked occupational disease.
DOT ID and Guide1645 151
Reactive GroupMetals, Less Reactive
EC ClassificationSymbol: T+, N; R: 26/27/28-33-50/53; S: (1/2)-13-28-45-60-61; Note: A, 1
UN ClassificationUN Hazard Class: 6.1; UN Pack Group: II
RCRA Requirements · 1 item

D009; A solid waste containing mercury may or may not become characterized as a hazardous waste when subjected to the Toxicity Characteristic Leaching Procedure listed in 40 CFR 261.24, and if so characterized, must be managed as a hazardous waste. /Mercury/

Reactivity AlertsWater-Reactive

Safety & protection

Fire Fighting · 2 items

Excerpt from ERG Guide 151 [Substances - Toxic (Non-Combustible)]:

In case of fire in the surroundings, use appropriate extinguishing media.

First Aid Measures · 4 items

Fresh air, rest. Refer for medical attention.

Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer immediately for medical attention .

Rinse with plenty of water for several minutes (remove contact lenses if easily possible). Refer immediately for medical attention.

Rinse mouth. Give one or two glasses of water to drink. Refer for medical attention .

Accidental Release Measures · 2 items

· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.

· Do not touch damaged containers or spilled material unless wearing appropriate protective clothing.

First Aid · 2 items

Get medical attention.

General First Aid:

Safe StorageSeparated from food and feedstuffs and hydrogen halides. Dry. Keep in the dark. Store in an area without drain or sewer access. Provision to contain effluent from fire extinguishing. Well closed. Store only in original container.
Exposure Control and Personal Protection · 2 items

· Wear positive pressure self-contained breathing apparatus (SCBA).

0.02 [mg/m3], as Hg, inhalable fraction[German Research Foundation (DFG)]

Fire Fighting ProceduresIf material involved in fire: Extinguish fire using agent suitable for type of surrounding fire. (Material itself does not burn or burns with difficulty). Use water in flooding quantities as fog. Use foam, dry chemical, or carbon dioxide.
Storage ConditionsPROTECT FROM LIGHT.
Cleanup Methods · 5 items

Environmental considerations: Water spill: Add diluate caustic soda. If dissolved, apply sodium sulfide solution to precipitate heavy metals. If dissolved, apply activated carbon at ten times the spilled amount in region of 10 ppm or greater concn. Allow to aerate. Use mechanical dredges or lifts to remove immobilized masses of pollutants and precipitates.

Environmental considerations: Land spill: Dig a pit, pond, lagoon, or holding area to contain liquid or solid material. /SRP: If time permits, pits, ponds, lagoons, soak holes, or holding areas should be sealed with an impermeable flexible membrane liner./ Cover solids with a plastic sheet to prevent dissolving in rain or fire fighting water.

Mercury spills should be cleaned up immediately by use of a special vacuum cleaner. Then the area should be washed with a dilute calcium sulfide solution. Small quantities of mercury can be picked up by mixing with copper metal granules. ... /Mercury/

Mercury removal from waste water can be accomplished by these processes: BMS process; Chlorine is added to the waste water, oxidizing any mercury present to the ionic state. The BMS adsorbent (an activated carbon concentrate of sulfur cmpd on its surface) is used to collect ionic mercury. The spent adsorbent is then distilled to recover the mercury, leaving a carbon residue for reuse or disposal. TMR IMAC Process; Waste water is fed into a reactor, whereby a slight excess of chlorine is maintained, oxidizing any mercury present to ionic mercury. The liquid is then passed through the TMR IMAC ion-exchange resin where mercury ions are adsorbed. The mercury is then stripped from the spent resin with hydrochloric acid solution. /Mercury cmpds/

For more Cleanup Methods (Complete) data for MERCURIC SULFATE (6 total), please visit the HSDB record page.

Nonfire Spill ResponseExcerpt from ERG Guide 151 [Substances - Toxic (Non-Combustible)]:
Disposal MethodsGenerators of waste (equal to or greater than 100 kg/mo) containing this contaminant, EPA hazardous waste number D009, must conform with USEPA regulations in storage, transportation, treatment and disposal of waste.
Spillage Disposal · 1 item

Consult an expert! Personal protection: chemical protection suit including self-contained breathing apparatus. Do NOT let this chemical enter the environment. Sweep spilled substance into covered containers. Carefully collect remainder. Then store and dispose of according to local regulations.

Toxicology

TreatmentMercury poisoning is treated by immediate decontamination and chelation therapy using DMSA, DMPS, DPCN, or dimercaprol. (A7)
Health Effects · 1 item

Mercury mainly affects the nervous system. Exposure to high levels of metallic, inorganic, or organic mercury can permanently damage the brain, kidneys, and developing fetus. Effects on brain functioning may result in irritability, shyness, tremors, changes in vision or hearing, and memory problems. Acrodynia, a type of mercury poisoning in children, is characterized by pain and pink discoloration of the hands and feet. Mercury poisoning can also cause Hunter-Russell syndrome and Minamata disease. (L7)

Adverse EffectsNeurotoxin - Sensorimotor
Exposure Routes · 2 items

The substance can be absorbed into the body by inhalation of its aerosol, through the skin and by ingestion.

Oral (L7) ; inhalation (L7); dermal (L7)

Toxicity Summary · 1 item

High-affinity binding of the divalent mercuric ion to thiol or sulfhydryl groups of proteins is believed to be the major mechanism for the activity of mercury. Through alterations in intracellular thiol status, mercury can promote oxidative stress, lipid peroxidation, mitochondrial dysfunction, and changes in heme metabolism. Mercury is known to bind to microsomal and mitochondrial enzymes, resulting in cell injury and death. For example, mercury is known to inhibit aquaporins, halting water flow across the cell membrane. It also inhibits the protein LCK, which causes decreased T-cell signalling and immune system depression. Mercury is also believed to inhibit neuronal excitability by acting on the postsynaptic neuronal membrane. It also affects the nervous system by inhibiting protein kinase C and alkaline phosphatase, which impairs brain microvascular formation and function, as well as alters the blood-brain barrier. Mercury also produces an autoimmune response, likely by modification of major histocompatibility complex (MHC) class II molecules, self peptides, T-cell receptors, or cell-surface adhesion molecules. (L7, A8, A25, A26)

Signs and Symptoms · 5 items

Sore throat. Cough. Burning sensation. Shortness of breath. Laboured breathing.

MAY BE ABSORBED! Redness. Pain. Burning sensation. Blisters.

Redness. Pain.

Metallic taste. Burning sensation. Nausea. Abdominal pain. Vomiting. Diarrhoea. Shock or collapse.

Common symptoms include peripheral neuropathy (presenting as paresthesia or itching, burning or pain), skin discoloration (pink cheeks, fingertips and toes), edema (swelling), and desquamation (dead skin peels off in layers). (A5)

ICSC Environmental Data · 1 item

The substance is very toxic to aquatic organisms. Bioaccumulation of this chemical may occur in aquatic organisms. The substance may cause long-term effects in the aquatic environment. It is strongly advised not to let the chemical enter into the environment.

Natural Pollution SourcesMercuric sulfate (HgSO4) can be formed from mineral cinnabar under certain conditions.
Human Toxicity Excerpts · 1 item

Systemic toxicity may begin within a few hours after exposure to mercury and last for days. A strong metallic taste is followed by stomatis with gingival irritation, foul breath, and loosening of the teeth. The most serious ... effect is renal toxicity. ...

Artificial Pollution SourcesMercurous sulfate becomes gray on exposure to light with prodn of mercury and mercuric sulfate.
Carcinogen Classification3, not classifiable as to its carcinogenicity to humans. (L135)
Non-Human Toxicity ExcerptsMERCURIC SULFATE DIETARY LEVELS IN SINGLE COMB WHITE LEGHORN CHICKENS & JAPANESE QUAILS UP TO 200 PPM OF HG, HAD ONLY SMALL EFFECTS, IF ANY, UPON EGG PRODN, FERTILITY, HATCHABILITY, EGG SHELL STRENGTH, MORBIDITY, & MORTALITY.

Regulatory information

RCRA Requirements · 1 item

D009; A solid waste containing mercury may or may not become characterized as a hazardous waste when subjected to the Toxicity Characteristic Leaching Procedure listed in 40 CFR 261.24, and if so characterized, must be managed as a hazardous waste. /Mercury/

Atmospheric Standards · 1 item

Listed as a hazardous air pollutant (HAP) generally known or suspected to cause serious health problems. The Clean Air Act, as amended in 1990, directs EPA to set standards requiring major sources to sharply reduce routine emissions of toxic pollutants. EPA is required to establish and phase in specific performance based standards for all air emission sources that emit one or more of the listed pollutants. Mercuric sulfate is included on this list.

CERCLA Reportable Quantities · 1 item

Persons in charge of vessels or facilities are required to notify the National Response Center (NRC) immediately, when there is a release of this designated hazardous substance, in an amount equal to or greater than its reportable quantity of 10 lb or 4.54 kg. The toll free number of the NRC is (800) 424-8802; In the Washington D.C. metropolitan area (202) 426-2675. The rule for determining when notification is required is stated in 40 CFR 302.4 (section IV. D.3.b).

Clean Water Act Requirements · 1 item

Mercuric sulfate is designated as a hazardous substance under section 311(b)(2)(A) of the Federal Water Pollution Control Act and further regulated by the Clean Water Act Amendments of 1977 and 1978. These regulations apply to discharges of this substance. This designation includes any isomers and hydrates, as well as any solutions and mixtures containing this substance.

State Drinking Water Guidelines(AZ) ARIZONA 3 ug/l
Federal Drinking Water StandardsEPA 2 ug/l /Mercury/
Federal Drinking Water GuidelinesEPA 2 ug/l /Mercury/

Safety data

wgk
3
tsca
TSCA listed
rtecs
OX0500000
ridadr
UN 1645 (MERCURY SULPHATE)
hs_code
28521000
risk_code
26/27/28-33-50/53-51/53-42/43-36/38-61-60-46-45-52/53-35-23/24/25
Signal word
Danger
Symbol(GHS)
GHS06,GHS09
hazard_code
T+,N,T
safety_code
13-28-45-60-61-36/37-26-23-53-36/37/39-30
hazard_class
6.1
Storage Class
6.1A - Combustible acute toxic Cat. 1 and 2very toxic hazardous materials
packing_group
II
target organs
Kidney
Hazard statements
H300-H311-H410
Limited Quantities
0.5 Kg (solid)
Excepted Quantities
Max Inner Pack (1g or 1ml) and Max Outer Pack (500g or 500ml)
REACH Registrations
Active
Hazard Classifications
Acute Tox. 1 DermalAcute Tox. 2 InhalationAcute Tox. 2 OralAquatic Acute 1Aquatic Chronic 1STOT RE 2
Autoignition Temperature
>450 °C
Precautionary statements
P264-P270-P280-P273-P301+P310-P330-P302+P352-P312-P361+P364-P391-P405-P501
Hazardous Substances Data
7783-35-9(Hazardous Substances Data)

By action of sulfuric acid on mercury, with subsequent crystallization.

Prepared by reaction of a freshly prepared and washed wet filter cake of yellow mercuric oxide with sulfuric acid in glass or glass-lined vessels.

Formulations/Preparations100%
General Manufacturing InformationSulfuric acid, mercury(2+) salt (1:1): ACTIVE
Applications · 5 items

UsesMercury(II) sulfate is an electrolyte for primary batteries. Other applications are in extraction of gold and silver from roasted pyrites; as a catalyst in organic reactions such as conversion of acetylene to acetaldehyde; and as a reagent for wine coloring.

DescriptionMercuric sulfate is a white, odorless, crystalline solid. Molecular weight= 296.65; Freezing/Melting point=(decomposes). Hazard Identification (based on NFPA-704 M Rating System): Health 3, Flammability 0, Reactivity 0. Decomposes in water.

UsesElectrolyte for primary batteries; with NaCl for extracting gold and silver from roasted pyrites; as a reagent for wine coloring, barbital, and cystine.

UsesMercury(II) sulfate is used for gold and silver extraction, and to make other mercury compounds. Used as catalyst in the conversion of acetylene to acetaldehyde and used as a electrolyte in primary battery. It is commonly used as a catalyst in oxymercuration-demercuration, a type of electrophilic addition reaction.

General DescriptionOdorless white granules or crystalline powder. Denser than water. MERCURY(II) SULFATE is toxic by inhalation and by ingestion. MERCURY(II) SULFATE is used in medicine, for gold and silver extraction, and to make other mercury compounds.

Preparation methods · 1 item

PreparationMercury(II) sulfate is prepared by heating mercury with an excess of concentrated sulfuric acid; or by dissolving mercury(II) oxide in concentrated sulfuric acid. The solution is evaporated repeatedly to yield anhydrous salt as white leaftlets. However, in the presence of a small amount of water, the monohydrate of the salt, HgSO4•H2O crystallizes as a colorless rhombic prism. Hydrolysis occurs in the presence of a large amount of water, forming a yellow basic sulfate, HgSO4•2HgO. The compound also is prepared by treating alkali sulfate, such as sodium or potassium sulfate with a solution of mercury(II) nitrate.

Upstream & downstream products

Upstream raw materials

Fuming sulfuric acidMercuric Oxide

Downstream products

1 5-Anthraquinonedisulfonic acid3-Pyridinesulfonic acid3-HydroxypyridineDisperse Blue 56Pyridine-3-sulfonyl chloride hydrochloride1,2,4-Butanetriol1,5-Dihydroxyanthraquinone9,10-dioxoanthracene-1,8-disulphonic acid