HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Compound

Propionic anhydride

HCID 31263
New reaction
Print
Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
123-62-6
Standard SMILES
CCC(=O)OC(=O)CC
InChIKey
WYVAMUWZEOHJOQ-UHFFFAOYSA-N
Molecular formula
C6H10O3
Average molar mass
130.14 g/mol
Monoisotopic mass
130.06299418

Overview

Propionic anhydride is a colorless liquid with a pungent odor. Flash point 165 °F. Density 8.4 lb /gal. Corrosive to metals and tissue.

Names & identifiers

Preferred name
Propionic anhydride
IUPAC
propanoyl propanoate
English name
Propionic anhydride
Molecular formula
C6H10O3
Molecular weight
130.14

Names & synonyms

PROPIONIC ANHYDRIDE123-62-6Propanoic anhydridePropanoic acid, anhydridePropionyl oxidePropionic acid anhydrideMethylacetic anhydrideAnhydrid kyseliny propionovepropanoic acid anhydrideDTXSID1027007E3A2VV18E6DTXCID507007
Show more names
propionicpropionyloxideC2H5C(O)OC(O)C2H5PropinoicanhydridePropanic AnhydridePropionic Anhydried
RefChem:869661204-638-2propanoyl propanoateCaswell No. 708proprionic anhydridePropanoic acid, 1,1'-anhydrideMFCD00009303HSDB 1215

Database identifiers

CAS
123-62-6
PubChem CID
31263
DTXSID
DTXSID1027007
ChEMBL
CHEMBL3186472
UNII
E3A2VV18E6
EC Number
204-638-2
Nikkaji
J5.542E

Properties

Computed structural properties

XLogP
0.8
Topological polar surface area
43.4 Ų
Hydrogen bond donors
0
Hydrogen bond acceptors
3
Rotatable bonds
4
Heavy atoms
9
Formal charge
0
Complexity
103

Experimental & physicochemical properties

Chemical Classes · 2 items

Other Classes -> Acid Anhydrides, Other

Corrosives

SpringerMaterials PropertiesAcentric factor
Odor · 2 items

Very rancid odor

Pungent odor

Density · 4 items

1.01 at 68 °F (USCG, 1999) - Denser than water; will sink

1.011 g/cu cm at 20 °C

Relative density (water = 1): 1.01

1.012 @25 °C

Viscosity1.144 cP at 20 °C; 0.978 cP at 30 °C; 0853 cP at 40 °C; 0.7511 cP at 50 °C
Color/FormColorless liquid
Solubility · 4 items

Decomposed by water; soluble in methanol, ethanol, ether and chloroform

Soluble in alkalies

Miscible with ether; slightly soluble in carbon tetraachloride

Solubility in water: reaction

Flash Point · 4 items

145 °F (USCG, 1999)

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 6 items

Danger

H314: Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]

P260, P264, P280, P301+P330+P331, P302+P361+P354, P304+P340, P305+P354+P338, P316, P321, P363, P405, and P501 (click each P-code to see the statement)

Danger

H314 (100%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]

P260, P264, P264+P265, P280, P301+P330+P331, P302+P361+P354, P304+P340, P305+P354+P338, P316, P317, P321, P363, P405, and P501 (click each P-code to see the statement)

Hazard information

Regulatory Information · 6 items

Chemical: Propanoic acid, anhydride

List I Chemical: A chemical specified by regulation that, in addition to legitimate uses, is used in manufacturing a controlled substance in violation of the Act and is important to the manufacture of a controlled substance. (21 eCFR 1310.02)

Propanoic acid, 1,1'-anhydride is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Propanoic acid, 1,1'-anhydride are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

REACH registered substance: Propionic anhydride (EC: 204-638-2)

Propionic anhydride: Does not have an individual approval but may be used under an appropriate group standard

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

Other Safety InformationIMAP assessments - Propanoic acid, anhydride: Human health tier I assessment
DOT LabelCorrosive
Fire Hazards

Chemistry & industry

Uses & manufacturing

Uses · 5 items

Used to manufacture perfumes, oils, resins, dyes, pharmaceuticals, and cellulose esters; [Merck Index]

For propionic anhydride (USEPA/OPP Pesticide Code: 077704) there are 0 labels match. /SRP: Not registered for current use in the U.S., but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./

Esterifying agent for fats and oils; cellulose; dehydrating medium for nitrations and sulfonations; alkyd resins; dyestuffs; and pharmaceuticals

Esterifying agent for perfume oils, fats, cellulose, alkylated resins, dyestuffs, drugs and as a dehydrating agent

Propionic anhydride is used as an esterifying agent for fatty acids and cellulose, for the production of alkyd resins and perfume oils, and for the introduction of the propionyl group into dyes and pharmaceuticals.

U.S. Production · 6 items

2023: 75,000,000 - <150,000,000 lb

(1972) GREATER THAN 9.08X10+5 GRAMS

(1975) GREATER THAN 4.54X10+5 GRAMS

Propanoic acid, anhydride is listed as a High Production Volume (HPV) chemical (65FR81686). Chemicals listed as HPV were produced in or imported into the U.S. in >1 million pounds in 1990 and/or 1994. The HPV list is based on the 1990 Inventory Update Rule. (IUR) (40 CFR part 710 subpart B; 51FR21438).

Production volumes for non-confidential chemicals reported under the Inventory Update Rule. [Table#3001]

Production volume for non-confidential chemicals reported under the 2006 Inventory Update Rule. Chemical: Propanoic acid, 1,1'-anhydride. Aggregated National Production Volume: 10 to < 50 million pounds.

Consumer UsesNot Known or Reasonably Ascertainable
Industry UsesNot Known or Reasonably Ascertainable
Methods of Manufacturing · 2 items

Propionic anhydride is produced industrially either by heating propionic acid at 8 bar to 235 °C and distilling off the water formed, or by heating propionic acid with propionyl chloride in an inert solvent to 160 °C. Other possible routes involve the reaction of ethylene, carbon monoxide, and propionic acid in the presence of nickel carbonyl (Reppe synthesis) or cobalt or nickel iodide.

Related reactions

316 records
New reaction record
HRID 12314 reaction equation
HRID 12314As reactant
HRID 22365 reaction equation
HRID 22365As reactant
HRID 26198 reaction equation
HRID 26198As solvent
HRID 27679 reaction equation
HRID 27679As reactant
HRID 47108 reaction equation
HRID 47108As solvent
HRID 47632 reaction equation
HRID 47632As reactant
HRID 48276 reaction equation
HRID 48276As reactant
HRID 53355 reaction equation
HRID 53355As reactant
PreviousPage 1 of 40

Compound notes

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes

165 °F (74 °C) (Open Cup)

145 °F (63 °C) (Closed Cup)

63 °C c.c.

Boiling Point · 4 items

336 °F at 760 mmHg (USCG, 1999)

170 °C

167 °C

167 °C @760 [mm Hg]

DecompositionWhen heated to decomposition it emits acrid smoke and irritating fumes.
Melting Point · 4 items

-45 °F (USCG, 1999)

-45 °C

-45 °C

-45 °C

Vapor Density · 2 items

4.49 (Air = 1)

Relative vapor density (air = 1): 4.5

Physicochemical properties

Melting point
42 °C · −42 °C (−44 °F; 231 K)
Boiling point
167 to · 167 to 170 °C (333 to 338 °F; 440 to 443 K)
Density
1.015 g/cm3, · 1.015 g/cm3, liquid
vapor density
4.5 · 4.5 (vs air)
vapor pressure
10 mm · 10 mm Hg ( 57.7 °C)
refractive index
1.41 · 1.41
Flash point
63 °C · 63 °C (145 °F; 336 K)
storage temp.
30 °C · Store below +30°C.
solubility
2 O: · H2O: decomposes (when in contact with water)
form
Clear liquid
color
Colorless to Almost colorless
Odor
like acetaldehyde
PH
2.5 · 2.5 (100g/l, H2O, 20℃)(calculated on the free acid)
explosive limit
1.3 · 1.3-9.5%(V)
Water Solubility
hydrolyses
Sensitive
Moisture Sensitive
Merck
14 · 14,7826
BRN
507066 · 507066
Dielectric constant
18 · 18.0(16℃)
Stability
Stable. Combustible. Incompatible with strong oxidizing agents, water, moisture, most common metals, active halogen compounds, ammonia, amines.
InChI
1S/C6H10O3/c1-3-5(7)9-6(8)4-2/h3-4H2,1-2H3
InChIKey
WYVAMUWZEOHJOQ-UHFFFAOYSA-N
SMILES
CCC(=O)OC(=O)CC
LogP
0.33 at · 0.33 at 20℃
CAS DataBase Reference
123 · 123-62-6(CAS DataBase Reference)
EWG's Food Scores
1 · 1
FDA UNII
3 A2VV18E6 · E3A2VV18E6
NIST Chemistry Reference
Propanoic acid, anhydride(123-62-6)
EPA Substance Registry System
Propionic anhydride (123-62-6)
UNSPSC Code
12352106 · 12352106
NACRES
22 · NA.22
Symbol(GHS)
5 · GHS05,GHS08
Signal word
Danger
Hazard statements
303 · H303-H314-H371-H402-H227-H290
Precautionary statements
501 · P501-P273-P260-P270-P210-P234-P264-P280-P370+P378-P390-P308+P311-P303+P361+P353-P301+P330+P331-P363-P304+P340+P310-P305+P351+P338+P310-P403+P235-P406-P405
PPE
Faceshields, Gloves, Goggles, type ABEK (EN14387) respirator filter
Hazard Codes
C
Risk Statements
34 · 34-R34
Safety Statements
26 · 26-45-S45-S26
RIDADR
2496 · UN 2496
WGK Germany
1 · 1
RTECS
9100000 · UF9100000
Autoignition Temperature
545 °F · 545 °F
Hazard Note
Corrosive/Moisture Sensitive
TSCA
TSCA listed
HS Code
2915900090 · 2915900090
HazardClass
8 · 8
PackingGroup
III
Storage Class
8 A · 8A - Combustible corrosive hazardous materials
Hazard Classifications
1 Skin · Eye Dam. 1Skin Corr. 1B
Hazardous Substances Data
123 · 123-62-6(Hazardous Substances Data)
Toxicity
50 orally · LD50 orally in rats: 2.36 g/kg (Smyth)
REACH Registrations
Active
· 3 items

Excerpt from ERG Guide 156 [Substances - Toxic and/or Corrosive (Combustible / Water-Sensitive)]:

· Combustible material: may burn but does not ignite readily.

Combustible. Above 63 °C explosive vapour/air mixtures may be formed.

Fire PotentialCombustible liquid
Health Hazards · 2 items

Inhalation causes irritation of eyes and respiratory tract. Contact with liquid causes burns of eyes and skin. Ingestion causes burns of mouth and stomach. (USCG, 1999)

· TOXIC and/or CORROSIVE; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death.

Hazards Summary · 1 item

Liquid may cause first degree burns after brief skin contact; [CHRIS] Corrosive to the skin, eyes, and respiratory tract; Pulmonary edema may be delayed after an inhalation exposure; [ICSC] Skin sensitization has not been reported. [OECD SIDS]

DOT ID and Guide2496 156
FDA Requirements · 1 item

The following chemicals have been specifically designated by the Administrator of the Drug Enforcement Administration as the listed chemicals subject to the provisions of this part and parts 1309 and 1313 of this chapter. Each chemical has been assigned the DEA Chemical Code Number set forth opposite it. Propionic anhydride (DEA Code: 8328) is included on this list.

Reactive GroupAnhydrides
UN ClassificationUN Hazard Class: 8; UN Pack Group: III
TSCA Requirements · 2 items

Section 8(a) of TSCA requires manufacturers of this chemical substance to report preliminary assessment information concerned with production, exposure, and use to EPA as cited in the preamble in 51 FR 41329. Effective date 9/30/91; Reporting date: 11/27/91.

Pursuant to section 8(d) of TSCA, EPA promulgated a model Health and Safety Data Reporting Rule. The section 8(d) model rule requires manufacturers, importers, and processors of listed chemical substances and mixtures to submit to EPA copies and lists of unpublished health and safety studies. Propanoic anhydride is included on this list. Effective date: 9/30/91; Sunset date: 12/19/95.

Safety & protection

Fire Fighting · 2 items

Excerpt from ERG Guide 156 [Substances - Toxic and/or Corrosive (Combustible / Water-Sensitive)]:

Use water spray, powder, alcohol-resistant foam, carbon dioxide.

First Aid Measures · 4 items

Fresh air, rest. Half-upright position. Artificial respiration may be needed. Refer immediately for medical attention.

Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer immediately for medical attention .

Rinse with plenty of water for several minutes (remove contact lenses if easily possible). Refer immediately for medical attention. Keep rinsing during transport for medical attention.

Rinse mouth. Do NOT induce vomiting. Give nothing to drink. Refer immediately for medical attention.

Accidental Release Measures · 2 items

· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.

· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.

First Aid · 2 items

INHALATION: move victim to fresh air; if breathing has stopped, give artificial respiration.

General First Aid:

Safe StorageDry. Ventilation along the floor. Separated from bases, oxidants and food and feedstuffs. Store only in original container.
Exposure Control and Personal Protection· Wear positive pressure self-contained breathing apparatus (SCBA).
Fire Fighting Procedures · 2 items

Use water spray, dry chemical, "alcohol resistant" foam, or carbon dioxide. Use water spray to keep fire-exposed containers cool. Hazardous reactions may be avoided by using large quantities of water to solubilize the anhydride & fully absorb the heat of reaction.

If material on fire or involved in a fire: Use water in flooding quantities as fog. Solid streams of water may be ineffective. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. Use foam, dry chemical, or carbon dioxide. Use water spray to knock-down vapors.

Storage Conditions · 2 items

Separated from acids, bases, oxidants, food and feedstuffs. Dry. Ventilation along the floor.

Outside or detached storage is preferred. Separate from heat & oxidizing materials. Exclude moisture from vapor space in storage tank.

Cleanup Methods · 4 items

Spill or leak procedures: Use water spray to cool and disperse vapors, protect personnel, and dilute spills to form nonflammable mixtures. Control runoff and isolate discharged material for proper disposal. Neutralize spill and washings with soda ash or lime.

Environmental considerations: Land spill: Dig a pit, pond, lagoon, or holding area to contain liquid or solid material /SRP: If time permits, pits, ponds, lagoons, soak holes, or holding areas should be sealed with an impermeable flexible membrane liner./ Dike surface flow using soil, sand bags, foamed polyurethane, or foamed concrete. Absorb bulk liquid with fly ash or cement powder.

Environmental considerations: Water spill: Neutralize with agricultural lime (Cao), crushed limestone (CaCO3), or sodium bicarbonate (NaHCO3). If dissolved, in region of 10 ppm or greater concentration, apply activated carbon at ten times the spilled amount. Use mechanical dredges or lifts to remove immobilized masses of pollutants and precipitates.

Environmental considerations: Air spill: Apply water spray or mist to knock down vapors.Vapor knockdown water is corrosive or toxic and should be diked for containment.

Nonfire Spill ResponseExcerpt from ERG Guide 156 [Substances - Toxic and/or Corrosive (Combustible / Water-Sensitive)]:
Disposal Methods · 2 items

SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational exposure or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal, aquatic, and plant life; and conformance with environmental and public health regulations.

SRP: Wastewater from contaminant suppression, cleaning of protective clothing/equipment, or contaminated sites should be contained and evaluated for subject chemical or decomposition product concentrations. Concentrations shall be lower than applicable environmental discharge or disposal criteria. Alternatively, pretreatment and/or discharge to a permitted wastewater treatment facility is acceptable only after review by the governing authority and assurance that "pass through" violations will not occur. Due consideration shall be given to remediation worker exposure (inhalation, dermal and ingestion) as well as fate during treatment, transfer and disposal. If it is not practicable to manage the chemical in this fashion, it must be evaluated in accordance with EPA 40 CFR Part 261, specifically Subpart B, in order to determine the appropriate local, state and federal requirements for disposal.

Spillage Disposal · 1 item

Personal protection: chemical protection suit including self-contained breathing apparatus, face shield and protective gloves. Collect leaking liquid in sealable containers. Absorb remaining liquid in dry sand or inert absorbent. Then store and dispose of according to local regulations.

Toxicology

Environmental Fate · 3 items

TERRESTRIAL FATE: Hydrolysis half-lives of 10 and 1.0 minutes at pH values of 7 and 8, respectively, were estimated for propionic anhydride(1). Because of this rapid hydrolysis rate, biodegradation and volatilization from moist soil surfaces are not expected to be important terrestrial fate processes(SRC). Propionic anhydride is expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 1.36 mm Hg at 25 °C(2).

AQUATIC FATE: Hydrolysis half-lives of 10 and 1.0 minutes at pH values of 7 and 8, respectively, were estimated for propionic anhydride(1). Because of this rapid hydrolysis rate, biodegradation, bioconcentration and volatilization from water surfaces are not expected to be important aquatic fate processes(SRC).

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), propionic anhydride, which has a vapor pressure of 1.36 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase propionic anhydride is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 18 days(SRC), calculated from its rate constant of 9.1X10-13 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Photolysis of propionic anhydride is not expected to be an important environmetnal fate process due to the rapid hydrolysis rate(SRC).

Adverse EffectsDermatotoxin - Skin burns.
Exposure RoutesThe substance can be absorbed into the body by inhalation and by ingestion.
Signs and Symptoms · 4 items

Cough. Sore throat. Burning sensation. Shortness of breath. Symptoms may be delayed.

Redness. Pain. Skin burns.

Redness. Pain. Severe burns.

Burns in mouth and throat. Abdominal pain. Shock or collapse.

Medical Surveillance · 1 item

Physician's written opinion. For examination or consultation required under /the OSHA laboratory/ standard, the employer shall obtain a written opinion from the examining physician which shall include the following: Any recommendation for further medical follow-up; the results of the medical examination and any associated tests; any medical condition which may be revealed in the course of the examination which may place the employee at increased risk as a result of exposure to a hazardous workplace; and a statement that the employee has been informed by the physician of the results of the consultation or medical examination and any medical condition that may require further examination or treatment. The written opinion shall not reveal specific findings of diagnoses unrelated to occupational exposure.

Soil Adsorption/MobilitySoil adsorption and mobility of propionic anhydride are not expected to be important environmental fate processes due to the rapid hydrolysis to propionic acid under aqueous conditions(1-2).
Human Toxicity Excerpts · 3 items

/SIGNS AND SYMPTOMS/ ...Physiological effects /of acid anhydrides/ generally resemble those of corresponding acids, but they are more potent eye irritants in vapor phase, and may produce chronic conjunctivitis. They are slowly hydrolyzed on contact with body tissues and may occasionally cause sensitization. /Organic acid anhydrides/

/SIGNS AND SYMPTOMS/ Ingestion causes burns of the mouth and stomach.

/SIGNS AND SYMPTOMS/ The substance is corrosive to the eyes, the skin and the respiratory tract. Inhalation of vapor or aerosol may cause lung edema. The effects may be delayed.

Artificial Pollution Sources · 1 item

Propionic anhydride's production and use as an esterifying agent for perfume oils, fats, cellulose, alkylated resins, dyestuffs, drugs and as a dehydrating agent(1) may result in its release to the environment through various waste streams(SRC).

Environmental Biodegradation · 1 item

Biodegradation is not expected to be an important environmental fate process due to the rapid hydrolysis of propionic anhydride under aqueous conditions(1-2). Propionic anhydride, present at 100 mg/L, reached 83% of its theoretical BOD in 2 weeks using an activated sludge inoculum at 30 mg/L in the Japanese MITI test(3), however it is believed that this biodegradation measurement was of the acid(SRC).

Environmental BioconcentrationBioconcentration of propionic anhydride is not expected to be an important environmental fate process due to the rapid hydrolysis to propionic acid under aqueous conditions(1-2).
Volatilization from Water/Soil · 1 item

Volatilization from water surfaces or moist soil surfaces is not expected to be an important fate process due to the rapid hydrolysis of propionic anhydride under aqueous conditions(1-2). Propionic anhydride is expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 1.36 mm Hg(3).

Non-Human Toxicity Excerpts · 2 items

/LABORATORY ANIMALS: Acute Exposure/ ... Breathing air saturated with vapor for more than 1 hr produced deaths in rats.

/LABORATORY ANIMALS: Acute Exposure/ Rated 8 on rabbit eyes. /substances are rated on a scale of 1 to 10 according to the degree of injury observed after 24 hr. The most severe injuries are rated 10/

Regulatory information

FDA Requirements · 1 item

The following chemicals have been specifically designated by the Administrator of the Drug Enforcement Administration as the listed chemicals subject to the provisions of this part and parts 1309 and 1313 of this chapter. Each chemical has been assigned the DEA Chemical Code Number set forth opposite it. Propionic anhydride (DEA Code: 8328) is included on this list.

TSCA Requirements · 2 items

Section 8(a) of TSCA requires manufacturers of this chemical substance to report preliminary assessment information concerned with production, exposure, and use to EPA as cited in the preamble in 51 FR 41329. Effective date 9/30/91; Reporting date: 11/27/91.

Pursuant to section 8(d) of TSCA, EPA promulgated a model Health and Safety Data Reporting Rule. The section 8(d) model rule requires manufacturers, importers, and processors of listed chemical substances and mixtures to submit to EPA copies and lists of unpublished health and safety studies. Propanoic anhydride is included on this list. Effective date: 9/30/91; Sunset date: 12/19/95.

CERCLA Reportable Quantities · 1 item

Persons in charge of vessels or facilities are required to notify the National Response Center (NRC) immediately, when there is a release of this designated hazardous substance, in an amount equal to or greater than its reportable quantity of 5000 lb or 2270 kg. The toll free number of the NRC is (800) 424-8802. The rule for determining when notification is required is stated in 40 CFR 302.4 (section IV. D.3.b).

Clean Water Act Requirements · 1 item

Propionic anhydride is designated as a hazardous substance under section 311(b)(2)(A) of the Federal Water Pollution Control Act and further regulated by the Clean Water Act Amendments of 1977 and 1978. These regulations apply to discharges of this substance. This designation includes any isomers and hydrates, as well as any solutions and mixtures containing this substance.

Safety data

PPE
Faceshields, Gloves, Goggles, type ABEK (EN14387) respirator filter
wgk
1
tsca
TSCA listed
rtecs
UF9100000
ridadr
UN 2496
hs_code
2915900090
Toxicity
LD50 orally in rats: 2.36 g/kg (Smyth)
risk_code
34-R34
Signal word
Danger
Symbol(GHS)
GHS05,GHS08
hazard_code
C
hazard_note
Corrosive/Moisture Sensitive
safety_code
26-45-S45-S26
hazard_class
8
Storage Class
8A - Combustible corrosive hazardous materials
packing_group
III
Hazard statements
H303-H314-H371-H402-H227-H290
REACH Registrations
Active
Hazard Classifications
Eye Dam. 1Skin Corr. 1B
Autoignition Temperature
545 °F
Precautionary statements
P501-P273-P260-P270-P210-P234-P264-P280-P370+P378-P390-P308+P311-P303+P361+P353-P301+P330+P331-P363-P304+P340+P310-P305+P351+P338+P310-P403+P235-P406-P405
Hazardous Substances Data
123-62-6(Hazardous Substances Data)

Obtained by dehydration of the acid or by carbonylation of its esters; ... from propionaldehyde by air oxidation in the presence of cobalt & copper acetate catalysts; ... other synthesis /methods/ ... from ethanol & carbon monoxide.

DEA Listed Chemicals · 2 items

Propionic anhydride

A chemical specified by regulation that, in addition to legitimate uses, is used in manufacturing a controlled substance in violation of the Act and is important to the manufacture of a controlled substance. (21 eCFR 1310.02)

General Manufacturing Information · 2 items

All Other Basic Organic Chemical Manufacturing

Propanoic acid, 1,1'-anhydride: ACTIVE

Applications · 2 items

UsesPropionic anhydride is used as a esterifying agent for certain perfume oils, fats, oils, and especially cellulose and as a reagent in organic synthesis. In the production of alkyd resins, dyestuffs and drugs. Has been used as a dehydrating agent in some sulfonations and nitrations.

General DescriptionPropionic anhydride is an organic compound with the molecular formula (CH3CH2CO)2O. it is an colorless acid anhydride that is widely used as a reagent in organic synthesis.

Upstream & downstream products

Upstream raw materials

Propionyl chlorideSodium propionate

Downstream products

LINALYL PROPIONATEcis-Anethol(-)-CARVYL PROPIONATEErythromycin EstolatePropionylthiocholine iodideTralkoxydimAlclometasone Dipropionate3-Methyl-chromen-2-oneCITRONELLYL PROPIONATE2-Ethyl-3-hydroxy-6-methylpyridine3-MethylquinolineDeprodone propionate(5-Fluoro-2-methyl-1H-inden-3-yl)acetic acidHydrocortisone Butyrate Propionate6-Methoxy-2-Acetyl Naphthalene6-MethylcoumarinDisperse Blue SE-2R2-Propionylfuran