HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.0
  1. Home
  2. /Compound

Ammonium Persulfate

HCID 62648
New noteNew reactionRequest quotes
Print preview

Completing data — refresh the page later to see the latest

Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
7727-54-0
Standard SMILES
O=S(=O)([O-])OOS(=O)(=O)[O-].[NH4+].[NH4+]
InChIKey
ROOXNKNUYICQNP-UHFFFAOYSA-N
Molecular formula
H8N2O8S2
Average molar mass
228.21 g/mol
Monoisotopic mass
227.97220722

Overview

Ammonium persulfate appears as a white crystalline solid. A strong oxidizing agent. Does not burn readily, but may cause spontaneous ignition of organic materials. Used as a bleaching agent and as a food preservative.

Names & identifiers

Preferred name
Ammonium Persulfate
IUPAC
diazanium;sulfonatooxy sulfate
English name
Ammonium persulfate
Molecular formula
H8N2O8S2
Molecular weight
228.2

Names & synonyms

Ammonium persulfate7727-54-0Ammonium peroxydisulfateDiammonium peroxydisulfateDiammonium peroxydisulphateAmmonium persulphateDTXSID902969122QF6L357FDTXCID209691CHEBI:156543Peroxydisulfuric acid (((HO)S(O)2)2O2), ammonium salt (1:2)RefChem:5551
Show more names
APS(NH4)2S2O8APPERAMMONIUM PERSULFATE (APS)AMMONIA PERSULFATEsulfonatooxy sulfate
Bis(Ammonium) Peroxodisulfate231-786-5Ammonium PeroxysulfateDiammonium PersulfatePeroxydisulfuric Acid, Diammonium SaltPersulfate d'ammoniumAmmonium peroxodisulfateAmmonium peroxydisulphate

Database identifiers

CAS
7727-54-0
PubChem CID
62648
DTXSID
DTXSID9029691
UNII
22QF6L357F
EC Number
231-786-5

Properties

Computed structural propertiesFilling in

Topological polar surface area
152 Ų
Hydrogen bond donors
2
Hydrogen bond acceptors
8
Rotatable bonds
1
Heavy atoms
12
Formal charge
0
Complexity
206

Experimental & physicochemical properties

Chemical Classes · 2 items

Other Classes -> Inorganic Oxidizing Agents

Reactive agents - 1st degree

Cosmetics · 2 items

Cosmetic ingredients (Ammonium Persulfate) -> CIR (Cosmetic Ingredient Review)

Bleaching

OdorOdorless
Food AdditivesANTIMICROBIAL AGENT, FUMIGANT -> FDA Substance added to food
Density · 4 items

1.98 at 68 °F (USCG, 1999) - Denser than water; will sink

1.982 g/cu cm

1.9 g/cm³

1.982 @25 °C

Color/Form · 2 items

Platelike or prismatic (monoclinic) crystals, or white granular powder

Colorless, white monoclinic crystals

Solubility · 3 items

Solubility in water: 83.5 g/100 g water at 25 °C

Freely soluble in water

Solubility in water, g/100ml at 20 °C: 58.2

Decomposition · 2 items

When heated to decomposition it emits toxic fumes of /sulfur oxides, nitrogen oxides and ammonia/.

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 6 items

Danger

H272: May intensify fire; oxidizer [Danger Oxidizing liquids; Oxidizing solids]

P210, P220, P233, P260, P261, P264, P264+P265, P270, P271, P272, P280, P284, P301+P317, P302+P352, P304+P340, P305+P351+P338, P319, P321, P330, P332+P317, P333+P317, P337+P317, P342+P316, P362+P364, P370+P378, P403, P403+P233, P405, and P501 (click each P-code to see the statement)

Danger

H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled [Danger Sensitization, respiratory]

P233, P260, P271, P284, P304+P340, P342+P316, P403, and P501 (click each P-code to see the statement)

Hazard information

Regulatory Information · 5 items

Chemical: Peroxydisulfuric acid ([(HO)S(O)2]2O2), ammonium salt (1:2)

Hazard Traits - Respiratory Toxicity

Peroxydisulfuric acid ([(HO)S(O)2]2O2), ammonium salt (1:2) is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Peroxydisulfuric acid ([(HO)S(O)2]2O2), ammonium salt (1:2) are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

Peroxydisulfuric acid, diammonium salt: HSNO Approval: HSR001311 Approved with controls

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

Other Safety InformationPEC / SN / Other assessments - Ammonium, potassium and sodium persulfate in hairdressing: Health
DOT LabelOxidizer
Fire Hazards · 3 items

Special Hazards of Combustion Products: Toxic oxides of nitrogen and sulfuric acid fumes may form in fire.

Chemistry & industry

Uses & manufacturing

Uses · 6 items

CIR ingredient: Ammonium Persulfate

Used as a bleaching and deodorizing agent, an echant for printed circuit boards, and in food preserving and electroplating; [Hawley] Occupational asthma reported in hairdresser; [Malo] Allergic contact dermatitis in hairdressers and bakers; [Marks]

Electroplating [Category: Plate]

Both oil base and water base fracturing fluids are being used in the fracturing industry. Water base, which includes alcohol-water mixtures and low strength acids, make up the majority of treating fluids. The common chemicals added to these fluids are polymers for viscosity development, crosslinkers for viscosity enhancement, pH control chemicals, gel breakers for polymer degradation following the treatment, surfactants, clay stabilizers, alcohol, bactericides, fluid loss additives and friction reducer. /Hydraulic fracturing/

Hydraulic fracturing uses a specially blended liquid which is pumped into a well under extreme pressure causing cracks in rock formations underground. These cracks in the rock then allow oil and natural gas to flow, increasing resource production. ... Chemical Name: Ammonium persulfate; Chemical Purpose: Allows a delayed break down of the gel; Product Function: Breaker.

... Used to desize cotton and sometimes as an additive in hydrogen peroxide bleaching.

U.S. Production · 3 items

2023: 1,000,000 - <5,000,000 lb

Production volumes for non-confidential chemicals reported under the Inventory Update Rule. [Table#7922]

Production volume for non-confidential chemicals reported under the 2006 Inventory Update Rule. Chemical: Peroxydisulfuric acid, ammonium salt. Aggregated National Production Volume: 10 to < 50 million pounds.

Consumer UsesEmulsifier
Industry UsesBleaching agent
Methods of Manufacturing · 3 items

All the peroxodisulfates /ammonium, potassium and sodium/ are made commercially by electrolytic processes. The traditional method was developed from the Degussa-Weissenstein process for making hydrogen peroxide, in which a solution containing ammonium sulfate and sulfuric acid was electrolyzed between platinum electrodes. Ammonium peroxodisulfate was crystallized directly from the spent electrolyte, and the other salts were made from this by adding alkali metal hydroxides and volatilizing the ammonia. In the 1970s, an improved electrolytic process was developed, giving all three peroxodisulfate salts directly from the corresponding hydrogen sulfate salts; one multipurpose cell could thus produce whichever salt was required. Cells of the old design used diaphragms of asbestos that were troublesome to maintain and would no longer be approved for safety reasons. Cells of the new design operate continuously and do not use a diaphragm.

Related reactions

291 records
New reaction record
HRID 944 reaction equation
HRID 944As reactantuspto-grants-1998_03
HRID 6584 reaction equation
HRID 6584As reactantuspto-grants-2006_08
HRID 11225 reaction equation
HRID 11225As reactantuspto-grants-2006_08
HRID 17762 reaction equation
HRID 17762As reactantuspto-grants-2010_06
HRID 59011 reaction equation
HRID 59011As reactantuspto-grants-2016_09
HRID 63265 reaction equation
HRID 63265As reactantuspto-grants-2016_09
HRID 128475 reaction equation
HRID 128475As reactantuspto-grants-1981_03
HRID 129024 reaction equation
HRID 129024As reactantuspto-grants-1995_11
Page 1 of 37

Compound notes

Loading…

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
More actions
New noteNew reactionRequest quotes

120 °C

Melting PointDecomposes at 120 °C
Food Contact SubstancesFCS -> FDA Inventory of Food Contact Substances Listed in 21 CFR
Physical Description · 4 items

Ammonium persulfate appears as a white crystalline solid. A strong oxidizing agent. Does not burn readily, but may cause spontaneous ignition of organic materials. Used as a bleaching agent and as a food preservative.

Liquid; Large Crystals; Dry Powder

Odorless crystals or white powder; [ACGIH]

COLOURLESS CRYSTALS OR WHITE POWDER.

Other Experimental Properties · 4 items

Strong oxidizer

Aqueous solution is acid and decomposes slowly at room temperature and rapidly at higher temperatures evolving O2 and forming NH4HSO4

Decomposes in water forming O2

When heated to decomposition it emits toxic fumes of SOx, NH3 and NOx.

Physicochemical properties

Melting point
120 °C · 120 °C
Density
1.98 · 1.98
bulk density
900 kg/m3 · 900kg/m3
vapor density
7.9 · 7.9 (vs air)
vapor pressure
0 Pa · 0Pa at 25℃
refractive index
1.5 · 1.50
storage temp.
15 °C · Store at +15°C to +25°C.
solubility
2 O: · H2O: soluble
form
powder
color
White to yellow
Specific Gravity
1.982 · 1.982
Odor
Odorless
PH Range
1 · 1 - 2
PH
1 · 1.0-2.5 (25℃, 1M in H2O)
biological source
rabbit
Oxidising Properties
3 · The substance or mixture is classified as oxidizing with the subcategory 3
Water Solubility
582 g/L · 582 g/L (20 ºC) decomposes
Sensitive
Moisture Sensitive
Merck
14 · 14,541
Exposure limits
0.1 mg/m3 · ACGIH: TWA 0.1 mg/m3
Stability
Stable. Oxidizing. May ignite combustible material. Incompatible with bases, combustible material, hydrogen peroxide, peroxy compounds, silver compounds, zinc. May decompose upon exposure to water or moist air.
Cosmetics Ingredients Functions
BLEACHINGOXIDISING
Cosmetic Ingredient Review (CIR)
Ammonium persulfate (7727-54-0)
InChI
1S/2H3N.H2O8S2/c;;1-9(2,3)7-8-10(4,5)6/h2*1H3;(H,1,2,3)(H,4,5,6)
InChIKey
ROOXNKNUYICQNP-UHFFFAOYSA-N
SMILES
N.N.OS(=O)(=O)OOS(O)(=O)=O
LogP
-1 at · -1 at 20℃
Substances Added to Food (formerly EAFUS)
AMMONIUM PERSULFATE
FDA 21 CFR
175.105 · 175.105; 176.170; 177.1200;178.3520
CAS DataBase Reference
7727 · 7727-54-0(CAS DataBase Reference)
EWG's Food Scores
4 · 4-7
FDA UNII
22 QF6L357F · 22QF6L357F
EPA Substance Registry System
Ammonium peroxydisulfate (7727-54-0)
Absorption
308 nm · cut-off at 308nm in H2O at 1M
Cosmetics Info
Ammonium Persulfate
UNSPSC Code
41105319 · 41105319
NACRES
22 · NB.22
Symbol(GHS)
3 · GHS03,GHS07,GHS08
Signal word
Danger
Hazard statements
302 · H302-H315-H319-H371-H372-H317-H334-H335-H402-H272
Precautionary statements
501 · P501-P273-P272-P260-P270-P220-P210-P221-P271-P264-P280-P284-P302+P352-P370+P378-P342+P311-P337+P313-P305+P351+P338-P308+P311-P362+P364-P333+P313-P301+P312+P330-P304+P340+P312-P403+P233-P405
target organs
Respiratory system
Hazard Codes
O,Xn
Risk Statements
8 · 8-22-36/37/38-42/43
Safety Statements
22 · 22-24-26-37
RIDADR
1444 · UN 1444
WGK Germany
1 · 1
RTECS
350000 · SE0350000
TSCA
TSCA listed
HazardClass
5.1 · 5.1
PackingGroup
III
HS Code
28334000 · 28334000
Storage Class
5.1 B · 5.1B - Oxidizing hazardous materials
Hazard Classifications
4 OralEye · Acute Tox. 4 OralEye Irrit. 2Ox. Sol. 3Resp. Sens. 1Skin Irrit. 2Skin Sens. 1STOT SE 3
Hazardous Substances Data
7727 · 7727-54-0(Hazardous Substances Data)
Toxicity
50 orally · LD50 orally in rats: 820 mg/kg (Smyth)
REACH Registrations
Active
Limited Quantities
5 kg · 5.0 kg (11 lbs) (solid)
Excepted Quantities
Max Inner Pack (30g or 30ml) and Max Outer Pack (1Kg or 1L)

CAUTION: Ammonium nitrate products may explode if involved in fire or contaminated with hydrocarbons (fuels), organic matter, other contaminants or when hot molten and contained. Treat as an explosive (GUIDE 112).

Not combustible but enhances combustion of other substances. Gives off irritating or toxic fumes (or gases) in a fire. Risk of fire and explosion on contact with combustible substances or reducing agents.

Fire PotentialMaterial itself does not burn or burns with difficulty.
Health Hazards · 2 items

Inhalation produces slight toxic effects. Contact with dust irritates eyes and causes skin rash. (USCG, 1999)

· Inhalation, ingestion or contact (skin, eyes) with vapors or substance may cause severe injury, burns or death.

Hazards Summary · 1 item

Ammonium persulfate, used to 'boost' peroxide hair bleaches, causes contact urticaria and anaphylactoid reactions. [Marks, p. 177] Both ammonium persulfate and benzoyl peroxide are used to bleach flour. [Marks, p. 324] Used as a reducer and retarder in the development of photographs; [Kanerva, p. 1637] It may induce either Type I reactions (urticaria, anaphylaxis, and asthma) or Type IV reactions (allergic contact dermatitis). [Kanerva, p. 1513] A skin, eye, and respiratory tract irritant; A skin sensitizer; May cause urticaria and asthma; [ICSC] Frequent skin rashes are reported in workers exposed to persulfates (S2O8). Rats inhaling 4-20 mg/m3 of ammonium persulfate 23.5 hours/day for 7 days show signs of lung inflammation and loss of body weight. The TLV is proposed to reduce irritation of skin, throat, and respiratory tract. [ACGIH] Danger of sensitization of skin and airways; [MAK]

DOT ID and Guide1444 140
Reactive GroupSalts, Acidic
EC ClassificationSymbol: O, Xn; R: 8-22-36/37/38-42/43; S: (2)-22-24-26-37
UN ClassificationUN Hazard Class: 5.1; UN Pack Group: III
Reactivity AlertsStrong Oxidizing Agent

Safety & protection

Fire Fighting · 2 items

Excerpt from ERG Guide 140 [Oxidizers]:

In case of fire in the surroundings, use appropriate extinguishing media. In case of fire: keep drums, etc., cool by spraying with water.

First Aid Measures · 4 items

Fresh air, rest. Artificial respiration may be needed. Refer for medical attention.

First rinse with plenty of water for at least 15 minutes, then remove contaminated clothes and rinse again.

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

Give one or two glasses of water to drink. Refer for medical attention .

Accidental Release Measures · 2 items

· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.

· Keep combustibles (wood, paper, oil, etc.) away from spilled material.

First Aid · 2 items

INHALATION: remove to fresh air.

General First Aid:

Safe StorageDry. Well closed. Separated from combustible substances, reducing agents, powdered metals and strong bases.
Exposure Control and Personal Protection· Wear positive pressure self-contained breathing apparatus (SCBA).
Fire Fighting Procedures · 1 item

If material involved in fire: Cool all affected containers with flooding quantities of water. Use water in flooding quantities as fog. Apply water from as far a distance as possible. Extinguish fire using agent suitable for type of surrounding fire.

Nonfire Spill ResponseExcerpt from ERG Guide 140 [Oxidizers]:
Disposal Methods · 1 item

SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational harm/injury/toxicity or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal and plant life; and conformance with environmental and public health regulations.

Spillage Disposal · 1 item

Personal protection: particulate filter respirator adapted to the airborne concentration of the substance. Do NOT let this chemical enter the environment. Sweep spilled substance into covered containers. Carefully collect remainder. Then wash away with plenty of water. Do NOT absorb in saw-dust or other combustible absorbents.

Preventive Measures · 3 items

SRP: The scientific literature for the use of contact lenses by industrial workers is inconsistent. The benefits or detrimental effects of wearing contact lenses depend not only upon the substance, but also on factors including the form of the substance, characteristics and duration of the exposure, the uses of other eye protection equipment, and the hygiene of the lenses. However, there may be individual substances whose irritating or corrosive properties are such that the wearing of contact lenses would be harmful to the eye. In those specific cases, contact lenses should not be worn. In any event, the usual eye protection equipment should be worn even when contact lenses are in place.

If material not involved in fire: Keep material out of water sources and sewers. Build dikes to contain flow as necessary.

Personnel protection: Avoid breathing vapors or dusts. ... Avoid bodily contact with the material. Wash away any material which may have contacted the body with copious amounts of water or soap and water.

Isolation and Evacuation · 2 items

Excerpt from ERG Guide 140 [Oxidizers]:

Immediate precautionary measure

Toxicology

Interactions · 1 item

Ammonium persulphate (APS) and hydrogen peroxide (H2O2) are used as oxidants in many industrial processes and are the main constituents of standard hair bleaching products. In a previous study, it was demonstrated that aerosols of APS induce alterations in airway responsiveness. The present study examined whether exposure for 4 hr to a hair bleach composition (containing APS, potassium persulphate and H2O2) or H2O2 could induce airway hyperresponsiveness and/or an obstructive ventilation pattern in a rabbit model. Exposure to the aerosols altered neither baseline airway resistance, dynamic elastance, slope of inspiratory pressure generation nor arterial blood pressure and blood gas measurements. Similarly to APS, hair bleach aerosols containing > or =10.9 mg /per/ cu m persulphate (ammonium and potassium salt) in air and > or =1.36 mg /per/cu m H2O2 in air caused airway hyperresponsiveness to acetylcholine after 4 hr of exposure. Aerosolized H2O2 (> or =37 mg /per/ cu m in air) did not influence airway responsiveness to acetylcholine. The results demonstrate that hair bleaching products containing persulphates dissolved in H2O2 cause airway hyperresponsiveness to acetylcholine in rabbits.

Adverse EffectsSkin Sensitizer - An agent that can induce an allergic reaction in the skin.
Exposure RoutesThe substance can be absorbed into the body by inhalation of its aerosol and by ingestion.
Toxicity Summary · 2 items

The CIR Expert Panel concluded that Ammonium, Potassium, and Sodium Persulfate are safe as used as oxidizing agents in hair colorants and hair lighteners designed for brief discontinuous use followed by thorough rinsing from the hair and skin. The Panel also concluded that the available data are insufficient for determining the safety of these persulfates in leave-on products and dentifrices.

Safe for use in cosmetics, with qualifications

Signs and Symptoms · 4 items

Cough. Sore throat. Wheezing. Laboured breathing.

Redness. Burning sensation. Pain.

Redness. Pain.

Nausea. Diarrhoea. Vomiting. Sore throat.

ICSC Environmental DataThe substance is harmful to aquatic organisms.
Human Toxicity Excerpts · 5 items

/HUMAN EXPOSURE STUDIES/ 12 of 49 professional hairdressers patch tested with ammonium persulphate gave positive reactions, in contrast to 1 of 118 patients who were not hairdressers. ... The rate of degradation of ammonium persulphate in petroleum and in aqueous solution was estimated, and found to be 24% in 6 months.

/HUMAN EXPOSURE STUDIES/ A cross sectional study was performed in 32 of 33 employees of a persulphate producing chemical plant. Eighteen of 23 workmen from the same plant with no exposure to persulphates were taken as controls. Also, information was collected from medical records of the seven subjects who had left the persulphate production for medical reasons since 1971. Data were recalled by a questionnaire, skin prick tests were performed with five environmental allergens, and ammonium and sodium persulphate (80 mg/mL). Specific immunoglobulin E (IgE) to the same environmental allergens as in the skin test, and total IgE were measured. Lung function and bronchial responsiveness to histamine were assessed by standard procedures. Workplace concentrations of ammonium and sodium persulphate were estimated by area and personal monitoring. The amount of persulphate was analyzed as sulphur by inductively coupled plasma emission spectrometry. Work related rhinitis was reported by one subject with exposure to persulphates, conjunctivitis and bronchitis were reportedly related to work by two controls. There were no cutaneous reactions to persulphates in either group. Four non-atopic subjects exposed to persulphates, and two controls, one atopic and one non-atopic, were considered to be hyperresponsive to histamine. Three subjects exposed to persulphates with bronchial hyperresponsiveness (provocation dose of histamine causing a 15% fall in forced expiratory volume in one second (PD15 FEV1) < or = 1 mg) did not show variability in peak expiratory flow of > or = 20%, the rest refused peak flow measurements. None of the variables showed significant differences between the groups (P > 0.05). Six of the ex- workers left because of work related contact dermatitis. Mean values for workplace concentrations of ammonium and sodium persulphate within the bagging plant were below 1 mg/cu m, and the maximal concentrations were 1.4 mg/cu m and 3.6 mg/cu m, respectively. /persulphates/

/HUMAN EXPOSURE STUDIES/ The relationships between asthma and rhinitis are still a crucial point in respiratory allergy and have scarcely been analyzed in occupational setting. /This study/ aimed to compare the clinical and inflammatory features of subjects with occupational asthma only (OA) to subjects with OA associated to occupational rhinitis (OAR) caused by persulphate salts. The clinical charts of 26 subjects diagnosed /with/ respiratory allergy caused by ammonium persulphate (AP), confirmed by specific inhalation challenge (SIC), were reviewed. Twenty-two out of twenty-six patients underwent pre-SIC-induced sputum challenge test (IS) and 24/26 underwent nasal secretion collection and processing. Twelve out of twenty-six patients received a diagnosis of OA-only and 14/26 of OAR. Duration of exposure before diagnosis, latency period between the beginning of exposure and asthma symptom onset, basal FEV(1), airway reactivity to methacholine and asthma severity did not differ in the two groups. Eosinophilic inflammation of upper and lower airways characterized both groups. Eosinophil percentage in IS tended to be higher in OAR [11.9 (5.575-13.925)%] than in OA-only [2.95 (0.225-12.5)%] (P = 0.31). Eosinophilia in nasal secretions was present both in subjects with OAR [55 (46-71)%] and in subjects with OA-only [38 (15-73.5)%], without any significant difference. /This/ result indicates that OA because of ammonium persulphate coexists with occupational rhinitis in half of the patients. Unexpectedly, rhinitis did not seem to have an impact on the natural history of asthma. The finding of nasal inflammation in subjects with OA-only without clinical manifestations of rhinitis supports the united airway disease concept in occupational respiratory allergy as a result of persulphates.

Non-Human Toxicity Excerpts · 5 items

/LABORATORY ANIMALS: Acute Exposure/ Ammonium, Potassium, and Sodium Persulfate are inorganic salts used as oxidizing agents in hair bleaches and hair-coloring preparations. Persulfates are contained in hair lighteners at concentrations up to 60%, in bleaches and lighteners at up to 22% and 16%, respectively, and in off-the-scalp products used to highlight hair strands at up to 25%. They are used in professional product bleaches and lighteners at similar concentrations. Much of the available safety test data are for Ammonium Persulfate, but these data are considered applicable to the other salts as well. Acute dermal, oral, and inhalation toxicity studies are available, but only the latter are remarkable, with gross lesions observed in the lungs, liver, stomach, and spleen.

/LABORATORY ANIMALS: Acute Exposure/ ... It was the aim of this study to investigate whether inhaled ammonium persulphate affects the non-adrenergic, non-cholinergic (NANC) inhibitory innervation, the cholinergic nerve-mediated contraction or the muscular response to the spasmogens, carbachol or histamine, in the guinea pig epithelium-free, isolated trachea. Male guinea pigs inhaled aerosols containing ammonium persulphate (10 mg/m(3) for 30 min for 5 days during 3 weeks). Control animals inhaled saline aerosol. NANC relaxations to electrical field stimulation at 3 Hz were evaluated in whole tracheal segments as intraluminal pressure changes. Drugs inactivating peptide transmission, nitric oxide synthase, carbon monoxide production by heme oxygenase-2 and soluble guanylyl cyclase were used to assess the involvement of various inhibitory neurotransmitters. Carbachol and histamine cumulative concentration-response curves were obtained. In both groups, nitric oxide and carbon monoxide participated to the same extent as inhibitory neurotransmitters. In exposed animals, the tracheal NANC relaxations were reduced to 45.9 +/- 12.1% (p < 0.01). The cholinergic nerve-mediated contractions to electrical field stimulation and the muscular response to histamine were not modified by ammonium persulphate exposure. The muscular response to carbachol was unaffected up to 1 microM. Conversely, the response to the maximal concentration of carbachol (3 microM) was increased (p < 0.01). Ammonium persulphate inhalation at high concentrations impairs the nervous NANC inhibitory control in the guinea pig airways. ...

/LABORATORY ANIMALS: Subchronic or Prechronic Exposure/ In short-term and subchronic feeding studies the results were mixed; some studies found no evidence of toxicity and others found local damage to the mucous membrane in the gastrointestinal tract, but no other systemic effects. Short-term inhalation toxicity was observed when rats were exposed to aerosolized Ammonium Persulfate at concentrations of 4 mg/cu m and greater. Ammonium Persulfate (as a moistened powder) was not an irritant to intact rabbit skin, but was sensitizing (in a saline solution) to the guinea pig. It was slightly irritating to rabbit eyes.

Probable Routes of Human Exposure · 2 items

According to the 2006 TSCA Inventory Update Reporting data, the number of persons reasonably likely to be exposed in the industrial manufacturing, processing, and use of ammonium peroxydisulfate is 1000 or greater; the data may be greatly underestimated(1).

NIOSH (NOES Survey 1981-1983) has statistically estimated that 249,578 workers (81,412 of these are female) are potentially exposed to ammonium peroxydisulfate in the US(1).

Antidote and Emergency Treatment · 3 items

/SRP:/ Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand-valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR as necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. /Inorganic acids and related compounds/

/SRP:/ Basic treatment: Establish a patent airway (oropharyngeal or nasopharyngeal airway, if needed). Suction if necessary. Watch for signs of respiratory insufficiency and assist respirations if needed. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Monitor for pulmonary edema and treat if necessary ... . Monitor for shock and treat if necessary ... . For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with 0.9% saline (NS) during transport ... . Do not use emetics. Activated charcoal is not effective. For ingestion, rinse mouth and administer 5 ml/kg up to 200 ml of water for dilution if the patient can swallow, has a strong gag reflex, and does not drool ... . Do not attempt to neutralize because of exothermic reaction. Cover skin burns with dry, sterile dressings after decontamination ... . /Inorganic acids and related compounds/

/SRP:/ Advanced treatment: Consider orotracheal or nasotracheal intubation for airway control in the patient who is unconscious, has severe pulmonary edema, or is in severe respiratory distress. Early intubation, at the first sign of upper airway obstruction, may be necessary. Positive-pressure ventilation techniques with a bag valve mask device may be beneficial. Consider drug therapy for pulmonary edema ... . Consider administering a beta agonist such as albuterol for severe bronchospasm ... . Monitor cardiac rhythm and treat arrhythmias as necessary ... . Start IV administration of D5W /SRP: "To keep open", minimal flow rate/. Use 0.9% saline (NS) or lactated Ringer's(LR) if signs of hypovolemia are present. For hypotension with signs of hypovolemia, administer fluid cautiously. Consider vasopressors if patient is hypotensive with a normal fluid volume. Watch for signs of fluid overload ... . Use proparacaine hydrochloride to assist eye irrigation ... . /Inorganic acids and related compounds/

Non-Human Toxicity Values · 5 items

LD50 Rat ip 226 mg/kg

LD50 Rabbit iv 178 mg/kg

LC50 Rat inhalation >2950 mg/cu m 4 hr

LD50 Rat dermal >2000 mg/kg

For more Non-Human Toxicity Values (Complete) data for Ammonium peroxydisulfate (10 total), please visit the HSDB record page.

Safety data

wgk
1
tsca
TSCA listed
rtecs
SE0350000
ridadr
UN 1444
hs_code
28334000
Toxicity
LD50 orally in rats: 820 mg/kg (Smyth)
risk_code
8-22-36/37/38-42/43
Signal word
Danger
Symbol(GHS)
GHS03,GHS07,GHS08
hazard_code
O,Xn
safety_code
22-24-26-37
hazard_class
5.1
Storage Class
5.1B - Oxidizing hazardous materials
packing_group
III
target organs
Respiratory system
Hazard statements
H302-H315-H319-H371-H372-H317-H334-H335-H402-H272
Limited Quantities
5.0 kg (11 lbs) (solid)
Excepted Quantities
Max Inner Pack (30g or 30ml) and Max Outer Pack (1Kg or 1L)
REACH Registrations
Active
Hazard Classifications
Acute Tox. 4 OralEye Irrit. 2Ox. Sol. 3Resp. Sens. 1Skin Irrit. 2Skin Sens. 1STOT SE 3
Precautionary statements
P501-P273-P272-P260-P270-P220-P210-P221-P271-P264-P280-P284-P302+P352-P370+P378-P342+P311-P337+P313-P305+P351+P338-P308+P311-P362+P364-P333+P313-P301+P312+P330-P304+P340+P312-P403+P233-P405
Hazardous Substances Data
7727-54-0(Hazardous Substances Data)

... Produced by electrolytic oxidation of the appropriate hydrogen sulfate salt.

Electrolysis of concentrated solution of ammonium sulfate. Recovered by crystallization.

Household ProductsInformation on 14 consumer products that contain Ammonium peroxydisulfate in the following categories is provided:
Use Classification · 2 items

Food Additives -> FLOUR_TREATMENT_AGENT -> JECFA Functional Classes

Cosmetics -> Bleaching

General Manufacturing Information · 2 items

Wholesale and Retail Trade

Peroxydisulfuric acid ([(HO)S(O)2]2O2), ammonium salt (1:2): ACTIVE

Applications · 6 items

UsesIt can be used as analytical reagents, photographic fixing agent and reducing agent. It can be used as food preservative, oxidizing agent and initiator of high-molecular polymer. It can be used as raw material of producting persulfate and hydrogen peroxide in chemical industry, inhibitor of polymerization organic polymer, initiator of during the polymerization of vinyl chloride monomer. It can be used as bleaching agent in grease, soap industry. It can also be used as corrodent in plate metals cutting eclipse and oil extraction in oil industry. For food-grade, it can be used as modifier of wheat, brewer's yeast mildew. It can be used for flour modifier (Limited ≤0.3g/kg, the Japanese standard, 1999); Saccharomyces cerevisiae fungicide (limit 0.1%, FAO/WHO, 1984). The above information is edited by the chemicalbook of Wang Xiaodong.

DescriptionPersulfates are strong oxidizing agents widely used in the production of metals, textiles, photographs, cellophane, rubber, adhesive papers, foods, soaps, detergents and hair bleaches. Ammonium persulfate is used as a hair bleaching agent. It may induce irritant dermatitis, contact urticaria and allergic contact dermatitis and represents a major allergen in hairdressers.

UsesUsed for detection and determination of manganese and iron.

UsesAs oxidizer and bleacher; to remove hypo; reducer and retarder in photography; in dyeing, manufacture of aniline dyes; oxidizer for copper; etching zinc; decolorizing and deodorizing oils; electroplating; washing infected yeast; removing pyrogallol stains; making soluble starch; depolarizer in electric batteries; In animal chemistry chiefly for detection and determination of manganese.

UsesAmmonium Persulfate is a bleaching agent for food starch that is used up to 0.075% and with sulfur dioxide up to 0.05%.

General DescriptionA white crystalline solid. A strong oxidizing agent. Does not burn readily, but may cause spontaneous ignition of organic materials. Used as a bleaching agent and as a food preservative.

Upstream & downstream products

Upstream raw materials

Ammonium sulfateSulfuric acidAmmonia

Downstream products

binding agent RF type Dongfenglow polymer viscosity reducerwater stabilizing agent YSS-93polymer bactericidal flocculentamphoteric polyacrylamideemulsion used for paper series PCadhesive of type Dongfeng6-Hydroxy-7-methoxycoumarinEmeraldine base polyanilinePoly(acrylamide-co-acrylic acid)maleic acid-vinyl acetate copolymerSodium persulfateselfcrosslinking emulsion use dfor paper PC-01 seriesthermofusion dyeing leveler PAstiffening agent for synthetic fibre 855fltrate reducer JST501acrylate resin emulsion new typeCSF series modified sacrylic binderLT-01 emulsionflocculant PDA of cationic typePR-I retanning agentAC anti-fungus leather finishing agentmodified acrylic resin emulsion BNbinding agent SH-821thickening agent PAEcoupling agent NBC-1impregnanting agent for leatherthickening agent PASsynthetic thickener KG-201Ca-copolyacrylatedeepening agent TR in pigment dyingPoly(methyl acrylate)BT modified acrylic resin binder seriesweather-proof acrylic binder seriesrubber latex 104T/Cacrylate resin emulsion s-1TXG retention aidbutadiene resin emulsion LHYJ-DS50selfcrossline adhesive 7601Carbomer

/CASE REPORTS/ ... A 24-year-old woman ... acquired dermatitis following contact with bleaching substances while working as a hairdresser. After changing her profession, the dermatitis disappeared. Following the private use of a hairdressing bleach containing ammonium persulphate, she suffered a severe anaphylactic reaction with unconsciousness. The patient also developed an anaphylactic reaction three hours following patch testing with the hairdresser battery. The rub test with ammonium persulphate (2.5%) in a 1:100 solution was positive.

For more Human Toxicity Excerpts (Complete) data for Ammonium peroxydisulfate (8 total), please visit the HSDB record page.

/LABORATORY ANIMALS: Subchronic or Prechronic Exposure/ BALB/c mice were dermally treated on days 1 and 8, with dimethylsulfoxide (DMSO), 1% /ammonium persulfate/ (AP) or 5% AP (20 uL/ear). On day 15, the auricular lymph nodes were removed and an in vitro lymphocyte proliferation test (LPT) was performed. AP was tested for its ability to elicit an asthmatic response using a locally developed mouse model of chemical-induced asthma. On days 1 and 8, BALB/c mice received 20 uL AP (5%) or DMSO on each ear. On day 15, they received an intranasal instillation of AP (1%) or saline. Afterwards, ventilatory, inflammatory and immunological parameters were assessed. The LPT showed that in vitro stimulation of lymphocytes with AP leads to specific proliferation of lymphocytes from AP-sensitized mice. In vivo, AP induced, in AP-sensitized mice only, an 'early' ventilatory response (increased Penh (enhanced pause)) immediately after challenge, and airway hyper-reactivity to methacholine 22 hr later. Pulmonary inflammation was mainly characterized by neutrophils (10-15%). AP-sensitized mice showed an increase in total number of T helper (Th) and B lymphocytes together with an increased in vitro secretion of interleukin-4 (IL-4), IL-10 and IL-13 and an increase in total serum immunoglobulin E.

For more Non-Human Toxicity Excerpts (Complete) data for Ammonium peroxydisulfate (11 total), please visit the HSDB record page.