HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Compound

Methyldichlorosilane

HCID 6376
New reaction
Print
Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
75-54-7
Standard SMILES
C[SiH](Cl)Cl
InChIKey
NWKBSEBOBPHMKL-UHFFFAOYSA-N
Molecular formula
CH4Cl2Si
Average molar mass
115.03 g/mol
Monoisotopic mass
113.9459321

Overview

Methyldichlorosilane appears as a colorless fuming liquid with a pungent odor. Flash point: -26 °F; Boiling point: 41 °C (106 °F). Vapors heavier than air. Vapor and liquid may cause burns. Denser than water and decomposed by water to form hydrochloric acid, a corrosive material.

Names & identifiers

Preferred name
Methyldichlorosilane
IUPAC
dichloro(methyl)silane
English name
Dichloromethylsilane
Molecular formula
CH4Cl2Si
Molecular weight
115.03

Names & synonyms

Methyl-dichlorsilanDichlorohydridomethylsiliconRefChem:818563DTXCID906413200-877-14RYT75289H75-54-7DichloromethylsilaneDTXSID5026413LS-50Methyl dichlorosilaneMethyldichlorosilane
Show more names
methyldichlorosilaeMethyldichlorosilane,min.97%DK886CM8750Methylhydrosilanedichloromethyl-silan
MonomethyldichlorosilaneSilane, dichloromethyl-methyldichorosilaneMethyldichlorosilanHSiMeCl2MeSiHCl2Methyl(dichloro)silaneCH4Cl2Si

Database identifiers

CAS
75-54-7
PubChem CID
6376
DTXSID
DTXSID5026413
EC Number
200-877-1

Properties

Computed structural properties

Topological polar surface area
0 Ų
Hydrogen bond donors
0
Hydrogen bond acceptors
0
Rotatable bonds
0
Heavy atoms
4
Formal charge
0
Complexity
13.5

Experimental & physicochemical properties

Chemical Classes · 2 items

Toxic Gases & Vapors -> Chlorosilanes

Corrosives

SpringerMaterials PropertiesSchoenflies notation
LogPlog Kow = 1.7 at 25 °C
OdorACRID ODOR
Density · 4 items

1.11 at 77 °F (USCG, 1999) - Denser than water; will sink

1.10 at 27 °C

Relative density (water = 1): 1.1

1.10 @ 27°C

Color/FormColorless liquid
Solubility · 3 items

Sol in benzene, ether, heptane

SOL IN WATER

Solubility in water: reaction

Flash Point · 5 items

-14 °F (USCG, 1999)

-14 °F

15 °F (-9 °C) (Closed cup)

-22 °C (closed cup)

-22 °C c.c.

Boiling Point · 4 items

106.7 °F at 760 mmHg (USCG, 1999)

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 6 items

This chemical does not meet GHS hazard criteria for < 0.1% (1 of 2259) of reports.

Danger

H225 (> 99.9%): Highly Flammable liquid and vapor [Danger Flammable liquids]

P210, P231+P232, P233, P240, P241, P242, P243, P260, P261, P264, P270, P271, P280, P301+P316, P301+P330+P331, P302+P361+P354, P303+P361+P353, P304+P340, P305+P354+P338, P316, P321, P330, P363, P370+P378, P402+P404, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 2259 reports by companies from 12 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Danger

Hazard information

Hazards IdentificationWater-reactive material (WR)
Regulatory Information · 5 items

Chemical: Silane, dichloromethyl-

Silane, dichloromethyl- is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Silane, dichloromethyl- are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

REACH registered substance: Dichloro(methyl)silane (EC: 200-877-1)

Silane, dichloromethyl-: Does not have an individual approval but may be used as a component in a product covered by a group standard. It is not approved for use as a chemical in its own right.

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

DOT LabelDangerous When Wet Corrosive Flammable Liquid
Fire Hazards · 3 items

Chemistry & industry

Pharmacology

Metabolism/Metabolites... Chlorosilanes will be rapidly hydrolyzed upon contact with tissue fluids to release hydrochloric acid. /Chlorosilanes/
Absorption, Distribution and ExcretionThe substance can be absorbed into the body by inhalation of its vapor and by ingestion.

Uses & manufacturing

Uses · 5 items

Used to waterproof and improve wear resistance of textiles; Also used as a monomer for silicone fluids; [HSDB]

Textiles (Printing, Dyeing, or Finishing) [Category: Industry]

Monomer for silicone fluids

Manufacture of siloxanes

The organohydrosilane of greatest commercial importance is methyldichlorosilane. Careful hydrolysis of this material with water affords polymethyhydrosiloxanes, primarily used in the textile industry to waterproof and improve the wear resistance of fabrics.

U.S. Production · 6 items

2023: 10,000,000 - <50,000,000 lb

This chemical is listed as a High Production Volume (HPV) (65FR81686). Chemicals listed as HPV were produced in or imported into the U.S. in >1 million pounds in 1990 and/or 1994. The HPV list is based on the 1990 Inventory Update Rule. (IUR) (40 CFR part 710 subpart B; 51FR21438).

(1972) Greater than 4.54x10+5 grams

(1975) Probably greater than 4.54X10+5 grams

(1986) >10 million-50 million pounds

For more U.S. Production (Complete) data for METHYLDICHLOROSILANE (8 total), please visit the HSDB record page.

Industry UsesIntermediate
Methods of ManufacturingReaction of methyl chloride with silicon and copper.
Formulations/PreparationsGrades of purity: 97%

Related reactions

75 records
New reaction record
HRID 35746 reaction equation
HRID 35746As reactant
HRID 64602 reaction equation
HRID 64602As reactant
HRID 65498 reaction equation
HRID 65498As reactant
HRID 65500 reaction equation
HRID 65500As reactant
HRID 65502 reaction equation
HRID 65502As reactant
HRID 65509 reaction equation
HRID 65509As reactant
HRID 65511 reaction equation
HRID 65511As reactant
HRID 92050 reaction equation
HRID 92050As reactant
PreviousPage 1 of 10

Compound notes

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes

41 °C

41 °C

41 °C @760 [mm Hg]

Decomposition · 4 items

Toxic hydrogen chloride and phosgene gases may be formed.

The silanes decomp at elevated temp to liberate hydrogen and deposit a high purity silicon, which leads to some of the principal uses of silanes. /Silanes/

When heated to decomposition it emits toxic fumes of /hydrogen chloride/.

The substance decomposes on contact with bases, forming flammable/explosive gas.

Melting Point · 4 items

-135 °F (USCG, 1999)

-93 °C

-92 °C

-93 °C

Vapor Density · 2 items

3.97 (AIR= 1)

Relative vapor density (air = 1): 3.97

Physicochemical properties

Melting point
-93 °C · -93 °C
Boiling point
41 °C · 41 °C(lit.)
Density
1.105 g/mL · 1.105 g/mL at 25 °C(lit.)
vapor density
4 · 4 (vs air)
vapor pressure
6.79 psi · 6.79 psi ( 20 °C)
refractive index
20 · n20/D 1.398(lit.)
Flash point
26 °F · −26 °F
storage temp.
2 · 2-8°C
solubility
DECOMPOSES
form
Liquid
color
Colorless
Specific Gravity
1.11 · 1.11
Odor
Acrid; sharp, hydrochloric acid-like.
explosive limit
55 % · >55%
Water Solubility
DECOMPOSES
Sensitive
Air & Moisture Sensitive
Hydrolytic Sensitivity
8 · 8: reacts rapidly with moisture, water, protic solvents
BRN
1071194 · 1071194
Henry's Law Constant
7.6 · 7.6×10-4 mol/(m3Pa) at 25℃, HSDB (2015)
InChI
1S/CH4Cl2Si/c1-4(2)3/h4H,1H3
InChIKey
NWKBSEBOBPHMKL-UHFFFAOYSA-N
SMILES
C[SiH](Cl)Cl
CAS DataBase Reference
75 · 75-54-7(CAS DataBase Reference)
EWG's Food Scores
1 · 1
FDA UNII
4 RYT75289H · 4RYT75289H
NIST Chemistry Reference
Silane, dichloromethyl-(75-54-7)
EPA Substance Registry System
Methyldichlorosilane (75-54-7)
UNSPSC Code
12352101 · 12352101
NACRES
22 · NA.22
Symbol(GHS)
2 · GHS02,GHS05,GHS06
Signal word
Danger
Hazard statements
330 · H330-H303-H314-H335-H225-H260
Precautionary statements
501 · P501-P223-P240-P231+P232-P260-P210-P233-P243-P241-P242-P271-P264-P280-P284-P370+P378-P335+P334-P312-P303+P361+P353-P301+P330+P331-P363-P304+P340+P310-P305+P351+P338+P310-P403+P233-P402+P404-P403+P235-P405
PPE
Faceshields, Gloves, Goggles
Hazard Codes
F,T,C
Risk Statements
11 · 11-14/15-28-34-37-35-20/22
Safety Statements
16 · 16-26-36/37/39-43-45-7/8-30
RIDADR
1242 · UN 1242
WGK Germany
1 · 1
RTECS
3500000 · VV3500000
F
10 · 10-21
Autoignition Temperature
471 °F · 471 °F
TSCA
TSCA listed
HazardClass
4.3 · 4.3
PackingGroup
I
HS Code
29319090 · 29319090
Storage Class
4.3 · 4.3 - Hazardous materials which set free flammable gases upon contact with water
Hazard Classifications
3 InhalationAcute · Acute Tox. 3 InhalationAcute Tox. 3 OralEye Dam. 1Flam. Liq. 2Skin Corr. 1AWater-react 3
Hazardous Substances Data
75 · 75-54-7(Hazardous Substances Data)
REACH Registrations
Active

Special Hazards of Combustion Products: Toxic hydrogen chloride and phosgene gases may be formed.

· Produce flammable and toxic gases on contact with water.

Highly flammable. Gives off irritating or toxic fumes (or gases) in a fire. Vapour/air mixtures are explosive.

Fire Potential · 1 item

Flammable liquid. Vapors are heavier than air and may travel to a source of ignition and flash back. Evolves hydrogen and may ignite on contact with base. Combustion by-product include hydrogen chloride, other irritants, and toxic gases. Reignition may occur.

Health Hazards · 2 items

Inhalation causes irritation of respiratory tract; heavy exposure can cause pulmonary edema. Contact of liquid with skin or eyes causes severe burns. Ingestion causes burns of mouth and stomach. (USCG, 1999)

· Highly toxic: contact with water produces toxic gas, may be fatal if inhaled.

Hazards SummaryCorrosive to skin; [Quick CPC] A corrosive substance that can cause pulmonary edema; [ICSC] Can cause severe burn to eyes and skin; [HSDB] Water reactive and highly flammable; [CAMEO]
DOT ID and Guide1242 139
Reactive GroupChlorosilanes
UN ClassificationUN Hazard Class: 4.3; UN Subsidiary Risks: 3 and 8; UN Pack Group: I
Reactivity AlertsHighly Flammable
Reactivity Profile · 1 item

Chlorosilanes, such as METHYLDICHLOROSILANE, are compounds in which silicon is bonded to from one to four chlorine atoms with other bonds to hydrogen and/or alkyl groups. Chlorosilanes react with water, moist air, or steam to produce heat and toxic, corrosive fumes of hydrogen chloride. They may also produce flammable gaseous H2. They can serve as chlorination agents. Chlorosilanes react vigorously with both organic and inorganic acids and with bases to generate toxic or flammable gases. Impact of dichlorosilane causes mixtures to burst into flame. This is the case, when the dichlorosilane and most likely related substances are mixed with oxidants such as potassium permanganate, lead oxide, copper oxide, or silver oxide, even under inert gas atmosphere [Bretherick, 1995, pg. 193]. With METHYLDICHLOROSILANE, toxic hydrogen chloride and phosgene gases may be formed when burned.

Safety & protection

Fire Fighting · 2 items

Excerpt from ERG Guide 139 [Substances - Water-Reactive (Emitting Flammable and Toxic Gases)]:

Use AFFF, powder, carbon dioxide. NO hydrous agents. NO water. In case of fire: keep drums, etc., cool by spraying with water. NO direct contact with water.

First Aid Measures · 4 items

Fresh air, rest. Half-upright position. Artificial respiration may be needed. Refer for medical attention.

Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer for medical attention .

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

Rinse mouth. Do NOT induce vomiting. Give nothing to drink. Refer for medical attention .

Accidental Release Measures · 2 items

· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.

· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.

First Aid · 2 items

Get medical attention following all exposures to this compound.

General First Aid:

Safe StorageFireproof. Separated from oxidants, incompatible materials and food and feedstuffs. See Chemical Dangers. Cool. Dry. Well closed. Keep under inert gas.
Firefighting Hazards · 2 items

The vapor is heavier than air and may travel along the ground; distant ignition possible.

Difficult to extinguish; reignition may occur. Contact with water applied to adjacent fires will generate irritating hydrogen chloride.

Exposure Control and Personal Protection · 2 items

· Wear positive pressure self-contained breathing apparatus (SCBA).

TIH (Toxic Inhalation Hazard) - Term used to describe gases and volatile liquids that are toxic when inhaled. Some are TIH materials themselves, e.g., chlorine, and some release TIH gases when spilled in water, e.g., chlorosilanes. [ERG 2016].

Fire Fighting ProceduresUse dry chemical, foam, or carbon dioxide. DO NOT use water. Use water spray to keep fire-exposed containers cool. Approach fire from upwind to avoid hazardous vapors & toxic decomposition products.
Storage Conditions · 2 items

Fireproof /storage/. Separated from oxidants, food and feedstuffs, incompatible materials. ...Cool. Dry. Well closed. Keep under inert gas.

Store in a cool, dry, well-ventilated location. Separate from acids, alkalies, oxidizing materials, & water. Outside or detached storage is preferred.

Cleanup Methods · 2 items

Evacuate danger area! Consult an expert! Collect leaking liquid in sealable dry containers; do not use plastic containers. Absorb remaining liquid in sand or inert absorbent and remove to safe place. Do NOT wash away into sewer. NEVER direct water jet on liquid. (Extra personal protection: complete protective clothing including self-contained breathing apparatus.)

Eliminate all ignition sources. Stop or control the leak, if this can be done without undue risk. Use water spray to cool & disperse vapors & protect personnel. Control runoff & isolate discharged material for proper disposal.

Nonfire Spill ResponseExcerpt from ERG Guide 139 [Substances - Water-Reactive (Emitting Flammable and Toxic Gases)]:
Disposal Methods · 1 item

SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational exposure or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal, aquatic, and plant life; and conformance with environmental and public health regulations.

Toxicology

Environmental Fate · 5 items

TERRESTRIAL FATE: All silicon chlorides are immediately and completely hydrolyzed by water(1); therefore, methyldichlorosilane is expected to instantaneously hydrolyze to methyl dihydroxysilane upon contact with moist soil. Absorption to moist soil surfaces is not expected to be an important environmental fate process(SRC) due to this rapid hydrolysis(1). Methyldichlorosilane is expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 429 mm Hg(2).

AQUATIC FATE: All silicon chlorides are immediately and completely hydrolyzed by water(1); therefore, methyldichlorosilane is expected to immediately hydrolyze to methyl dihydroxysilane upon contact with water(1). Due to the rapid hydrolysis, bioconcentration and biodegradation are not important environmental factors for methyldichlorosilane(SRC) .

AQUATIC FATE: In water, chlorosilanes are hydrolyzed rapidly, releasing hydrochloric acid. /Chlorosilane/

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), methyldichlorosilane, which has a vapor pressure of 429 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase methyldichlorosilane is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 107 days (SRC), calculated from its rate constant of 1.5X10-13 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Methyl silanes are transparent to UV radiation >290 nm(4) and therefore methyldichlorosilane is not expected to undergo direct photolytic degradation(SRC).

For more Environmental Fate (Complete) data for METHYLDICHLOROSILANE (6 total), please visit the HSDB record page.

Adverse EffectsDermatotoxin - Skin burns.
Exposure RoutesThe substance can be absorbed into the body by inhalation of its vapour and by ingestion.
Signs and Symptoms · 4 items

Burning sensation. Cough. Sore throat. Laboured breathing. Shortness of breath. Symptoms may be delayed.

Redness. Blisters. Pain. Skin burns.

Redness. Pain. Severe deep burns.

Burning sensation. Abdominal pain. Shock or collapse.

Soil Adsorption/Mobility · 1 item

All silicon chlorides are immediately and completely hydrolyzed by water therefore methyldichlorosilane is expected to immediately hydrolyze to methyl dihydroxysilane upon contact with water(1). Soil adsorption and mobility are negligible when compared to the immediate hydrolysis(SRC).

Human Toxicity Excerpts/SIGNS AND SYMPTOMS/ Causes severe eye & skin burns. May be harmful if absorbed through skin or inhaled. Irritating to skin, eyes, & respiratory system.
Artificial Pollution SourcesMethyldichlorosilane's production and use in the synthesis of siloxanes(1) may result in its release to the environment through various waste streams(SRC).
Environmental BioconcentrationChlorosilanes are not expected to persist long enough to bioconcentrate. /Chlorosilanes/
Volatilization from Water/Soil · 2 items

The Henry's Law constant for methyldichlorosilane is estimated as 1.3X10-2 atm-cu m/mole(SRC) using a fragment constant estimation method(1). Methyldichlorosilane's Henry's Law constant indicates that volatilization from moist soil surfaces may occur however hydrolysis from water(2) is expected to occur at a more rapid rate than volatilization from moist surfaces(SRC). All silicon chlorides are immediately and completely hydrolyzed by water therefore methyldichlorosilane is expected to immediately hydrolyze to methyl dihydroxysilane upon contact with water(2). Methyldichlorosilane is expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 429 mm Hg(3).

The high volatility of /chlorosilanes/ suggests that they will move freely into the atmosphere. /Chlorosilanes/

Non-Human Toxicity Excerpts · 3 items

/LABORATORY ANIMALS: Acute Exposure/ Tests by application of a drop to rabbit eyes have been made on tetrachlorosilane, dichloridimethyl silane, dichlorodiethylsilane, methyltrichlorosilane, & ethyl trichlorosilane. All the chlorosilanes were found to cause severe damage of the cornea & lids. More severe damage was caused by the alkylchlorosilanes than by tetrachlorosilane (silicone tetrachloride). The principal danger is from splash contamination. /Chlorosilanes/

/LABORATORY ANIMALS: Acute Exposure/ Corrosive to skin /of animals/ due to liberation of hydrochloric acid.

/LABORATORY ANIMALS: Acute Exposure/ All these compounds, even in very low doses ... caused severe burns of cornea and eyelids. ... /After/ application to the skin of the rabbit the region attacked by chlorosilanes blanches and then blisters appear ... /Chlorosilanes/

Environmental Abiotic Degradation · 1 item

The rate constant for the vapor-phase reaction of methyldichlorosilane with photochemically-produced hydroxyl radicals has been estimated as 1.5X10-13 cu cm/molecule-sec at 25 °C(SRC) using a structure estimation method(1). This corresponds to an atmospheric half-life of about 107 days at an atmospheric concentration of 5X10+5 hydroxyl radicals per cu cm(1). All silicon chlorides are immediately and completely hydrolyzed by water therefore methyldichlorosilane is expected to immediately hydrolyze to methyl dihydroxysilane upon contact with water(2). Methyl silanes are transparent to UV radiation >290 nm(3) and therefore methyldichlorosilane is not expected to undergo direct photolytic degradation(SRC).

Probable Routes of Human ExposureOccupational exposure to methyldichlorosilane may occur through inhalation and dermal contact with this compound at workplaces where methyldichlorosilane is produced or used. (SRC)

Regulatory information

DHS Chemicals of Interest (COI) · 4 items

Methyldichlorosilane

A Commercial Grade

A Placarded Amount

Chemical or material that can be mixed with readily available materials.

Safety data

F
10-21
PPE
Faceshields, Gloves, Goggles
wgk
1
tsca
TSCA listed
rtecs
VV3500000
ridadr
UN 1242
hs_code
29319090
risk_code
11-14/15-28-34-37-35-20/22
Signal word
Danger
Symbol(GHS)
GHS02,GHS05,GHS06
hazard_code
F,T,C
safety_code
16-26-36/37/39-43-45-7/8-30
hazard_class
4.3
Storage Class
4.3 - Hazardous materials which set free flammable gases upon contact with water
packing_group
I
Hazard statements
H330-H303-H314-H335-H225-H260
REACH Registrations
Active
Hazard Classifications
Acute Tox. 3 InhalationAcute Tox. 3 OralEye Dam. 1Flam. Liq. 2Skin Corr. 1AWater-react 3
Autoignition Temperature
471 °F
Precautionary statements
P501-P223-P240-P231+P232-P260-P210-P233-P243-P241-P242-P271-P264-P280-P284-P370+P378-P335+P334-P312-P303+P361+P353-P301+P330+P331-P363-P304+P340+P310-P305+P351+P338+P310-P403+P233-P402+P404-P403+P235-P405
Hazardous Substances Data
75-54-7(Hazardous Substances Data)
General Manufacturing Information · 2 items

All Other Basic Organic Chemical Manufacturing

Silane, dichloromethyl-: ACTIVE

Applications · 3 items

DescriptionMethyl dichlorosilane, is a colorless liquid with a sharp irritating odor. It is a dangerous fire risk, corrosive, and water reactive. The flammable range is wide, from 6% on the lower end to 55% on the upper end. Boiling point is 107°F (41°C), flash point is 15°F (9°C), and ignition temperature is more than 600°F (315°C). Specific gravity is 1.11, which is heavier than water. Vapors are heavier than air and will travel to ignition sources. It is immiscible in water and decomposes on contact to release hydrogen chloride gas. Methyl dichlorosilane is toxic by inhalation and skin absorption; it is irritating to the skin, eyes, and respiratory system. Contact with the material may cause burns to the eyes and skin. The four-digit UN identification number is 1242. The NFPA 704 designation is health 3, flammability 3, and reactivity 2. The white space at the bottom of the diamond has a W with a slash through it, indicating water reactivity. The primary use is in the manufacture of siloxanes, which are straight-chained compounds similar to paraffin hydrocarbons.

UsesDichloromethylsilane is a monomer ('building block') in the production of silicone polymers. An intermediate (starting material) in the production of other organic and inorganic chemicals. In the electronics industry for the production of ultra-pure polysilicon and in the manufacture of semiconductors and photovoltaics.

General DescriptionA colorless fuming liquid with a pungent odor. Flash point: -26°F; Boiling point: 41°C (106°F) . Vapors heavier than air. Vapor and liquid may cause burns. Denser than water and decomposed by water to form hydrochloric acid, a corrosive material.

Upstream & downstream products

Upstream raw materials

SiliconCopper(I) chlorideChloromethane1,1,2,2-Tetrachloro-1,2-dimethyldisilaneMethyltrichlorosilaneChlorodimethylsilaneChloromethyl silaneMethylsilanemethyl-methylsilyl-silane

Downstream products

Silicone elastomer Ⅲ2,4,6,8-TetramethylcyclotetrasiloxanePentamethylcyclopentasiloxane1H,1H,2H,2H-Perfluorodecylmethyldichlorosilane