HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.1
  1. Home
  2. /Compound

Trichloromethylsilane

HCID 6399
New reaction
Print

Completing data — refresh the page later to see the latest

Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
75-79-6
Standard SMILES
C[Si](Cl)(Cl)Cl
InChIKey
JLUFWMXJHAVVNN-UHFFFAOYSA-N
Molecular formula
CH3Cl3Si
Average molar mass
149.47 g/mol
Monoisotopic mass
147.90695967

Overview

Methyltrichlorosilane appears as a colorless fuming liquid with a pungent odor. Flash point 8 °F. Vapor and liquid may cause burns. Denser than water. Vapors are heavier than air.

Names & identifiers

Preferred name
Trichloromethylsilane
IUPAC
trichloro(methyl)silane
English name
Methyltrichlorosilane
Molecular formula
CH3Cl3Si
Molecular weight
149.47

Names & synonyms

METHYLTRICHLOROSILANE75-79-6TrichloromethylsilaneMethyl-trichlorsilanSilane, trichloromethyl-Methylsilyl trichlorideMethylsilicochloroformTrichloromethylsiliconMonomethyltrichlorosilaneSilane, methyltrichloro-UIR5I18638NSC-77069
Show more names
CH3SiCl3CM9000SiCH3Cl3Luperox 118Perhexa 25ZKayaester ABMethyltrichlosilaneMethylsilichloroform
DTXSID4026426KA-13LS-40TSL-8003RefChem:7807DTXCID406426200-902-6Trichloro(methyl)silane

Database identifiers

CAS
75-79-6
PubChem CID
6399
DTXSID
DTXSID4026426
UNII
UIR5I18638
EC Number
200-902-6
Nikkaji
J54.325J

Properties

Computed structural propertiesFilling in

Topological polar surface area
0 Ų
Hydrogen bond donors
0
Hydrogen bond acceptors
0
Rotatable bonds
0
Heavy atoms
5
Formal charge
0
Complexity
28.4

Experimental & physicochemical properties

Chemical Classes · 2 items

Toxic Gases & Vapors -> Chlorosilanes

Corrosives

SpringerMaterials Properties29Si nuclear magnetic resonance spectrum
OdorACRID ODOR, SHARP LIKE HYDROCHLORIC ACID
Density · 4 items

1.27 at 77 °F (EPA, 1998) - Denser than water; will sink

1.270 at 25 °C/25 °C

Relative density (water = 1): 1.3

1.273 @ 20°C

Color/FormCOLORLESS LIQUID
Solubility · 3 items

Decomposes in ethanol

Decomposes instantly in water

Solubility in water: reaction

Flash Point · 3 items

15 °F (EPA, 1998)

45 °F (Open cup); 15 °F (Closed cup)

8 °C

Boiling Point · 4 items

152 °F at 760 mmHg (EPA, 1998)

65.6 °C

66 °C

65.6 °C @760 [mm Hg]

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 6 items

Danger

H225: Highly Flammable liquid and vapor [Danger Flammable liquids]

P210, P233, P240, P241, P242, P243, P261, P264, P264+P265, P271, P280, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P319, P321, P332+P317, P337+P317, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement)

This chemical does not meet GHS hazard criteria for < 0.1% (2 of 2308) of reports.

Danger

H225 (> 99.9%): Highly Flammable liquid and vapor [Danger Flammable liquids]

Hazard information

Hazards IdentificationWater-reactive material (WR)
Regulatory Information · 5 items

Chemical: Silane, trichloromethyl-

Silane, trichloromethyl- is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Silane, trichloromethyl- are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

Status: Active Update: 22-08-2022 https://echa.europa.eu/registration-dossier/-/registered-dossier/15120

Silane, trichloromethyl-: HSNO Approval: HSR001203 Approved with controls

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

DOT LabelFlammable Liquid Corrosive
Fire Hazards · 3 items

Toxic hydrogen chloride and phosgene gases may form in fires. Reacts with water or steam to form hydrochloric acid. Vapor forms flammable mixture with air. May form explosive mixture in air. Avoid contact with water or moist air. (EPA, 1998)

· HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

Chemistry & industry

Pharmacology

Metabolism/Metabolites... Chlorosilanes will be rapidly hydrolyzed upon contact with tissue fluids to release hydrochloric acid. /Chlorosilanes/
Absorption, Distribution and ExcretionThe substance can be absorbed into the body by inhalation and by ingestion.

Uses & manufacturing

Uses · 3 items

Used as a chemical intermediate for silicones; [Hawley]

Toxic Gas from Spilling Chemical in Water [Category: Other]

Intermediate for silicones

U.S. Production · 5 items

2023: 50,000,000 - <100,000,000 lb

This chemical is listed as a High Production Volume (HPV) (65FR81686). Chemicals listed as HPV were produced in or imported into the U.S. in >1 million pounds in 1990 and/or 1994. The HPV list is based on the 1990 Inventory Update Rule. (IUR) (40 CFR part 710 subpart B; 51FR21438).

(1972) GREATER THAN 4.54X10+5 G

(1975) GREATER THAN 4.54X10+5 G

Production volumes for non-confidential chemicals reported under the Inventory Update Rule. [Table#2266]

Consumer UsesAdhesion/cohesion promoter
Industry UsesIntermediate
Methods of Manufacturing · 2 items

CONTROLLED REACTION OF METHYL CHLORIDE WITH SILICON IN THE PRESENCE OF A COPPER CATALYST, FOLLOWED BY SEPARATION FROM OTHER METHYLCHLOROSILANES BY FRACTIONAL DISTILLATION.

By Grignard reaction of silicon tetrachloride and methylmagnesium chloride.

Formulations/PreparationsGRADES OF PURITY: 98+%.
General Manufacturing Information · 2 items

Related reactions

29 records
New reaction record
HRID 164103 reaction equation
HRID 164103As reactantTraining data from https://doi.org/10.1039/C8SC04228D (9/10)
HRID 327375 reaction equation
HRID 327375As reactantuspto-grants-1993_12
HRID 396054 reaction equation
HRID 396054As reactantuspto-grants-2003_08
HRID 396055 reaction equation
HRID 396055As reactantuspto-grants-2003_08
HRID 396082 reaction equation
HRID 396082As reactantuspto-grants-2003_08
HRID 396091 reaction equation
HRID 396091As reactantuspto-grants-2003_08
HRID 396095 reaction equation
HRID 396095As reactantuspto-grants-2003_08
HRID 396096 reaction equation
HRID 396096As reactantuspto-grants-2003_08
PreviousPage 1 of 4

Compound notes

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Decomposition · 3 items

Rapid hydrolysis precludes measurements. Possible toxic effects may be due to formation of hydrochloric acid.

When heated to decomposition it emits toxic fumes of /hydrogen chloride/.

Decomposes in moist air, creating hydrochloric acid with odor threshold of 1 ppm.

Melting Point · 4 items

-108 °F (EPA, 1998)

-90 °C

-90 °C

-90 °C

Vapor Density · 3 items

5.17 (EPA, 1998) - Heavier than air; will sink (Relative to Air)

5.17 (Air = 1)

Relative vapor density (air = 1): 5.2

Vapor Pressure · 4 items

167.0 [mmHg]

167 mm Hg at 25 °C

Vapor pressure, kPa at 20 °C: 17.9

75 [mm Hg] @7 °C

Physicochemical properties

Melting point
-77 °C · -77 °C
Boiling point
66 °C · 66 °C (lit.)
Density
1.273 g/mL · 1.273 g/mL at 25 °C (lit.)
vapor density
5.2 · 5.2 (vs air)
vapor pressure
150 mm · 150 mm Hg ( 25 °C)
refractive index
20 · n20/D 1.411
Flash point
5 °F · 5 °F
storage temp.
Flammables area
solubility
sol methylene chloride.
form
liquid
Specific Gravity
1.275 · 1.275
color
colorless
Odor
Sharp, irritating odor
explosive limit
5.5 · 5.5-10.4%(V)
Water Solubility
REACTS
FreezingPoint
-77.8 ℃ · -77.8℃
Specific Heat Capacity
1.09 J/ · Cp(liquid): 1.09 J/(g·K); Cp(gas): 0.69 J/(g·K), at 25℃
Hydrolytic Sensitivity
8 · 8: reacts rapidly with moisture, water, protic solvents
Sensitive
Moisture Sensitive
BRN
1361381 · 1361381
Stability
Stable, but reacts violently with water. Highly flammable. Incompatible with moisture, water, strong bases, strong acids, strong oxidizing agents.
InChI
1S/CH3Cl3Si/c1-5(2,3)4/h1H3
InChIKey
JLUFWMXJHAVVNN-UHFFFAOYSA-N
SMILES
C[Si](Cl)(Cl)Cl
CAS DataBase Reference
75 · 75-79-6(CAS DataBase Reference)
FDA UNII
5 I18638 · UIR5I18638
NIST Chemistry Reference
Silane, trichloromethyl-(75-79-6)
EPA Substance Registry System
Methyltrichlorosilane (75-79-6)
UNSPSC Code
12352300 · 12352300
NACRES
23 · NA.23
Symbol(GHS)
2 · GHS02,GHS05,GHS06
Signal word
Danger
Hazard statements
330 · H330-H302+H312-H315-H319-H335-H225-H290
Precautionary statements
501 · P501-P260-P270-P240-P210-P233-P234-P243-P241-P242-P271-P264-P280-P284-P370+P378-P390-P337+P313-P305+P351+P338-P362+P364-P303+P361+P353-P332+P313-P301+P312+P330-P304+P340+P310-P403+P233-P403+P235-P406-P405
target organs
Respiratory system
PPE
Faceshields, Gloves, Goggles, type ABEK (EN14387) respirator filter
Hazard Codes
F,Xi,C
Risk Statements
11 · 11-14-36/37/38-37-35-22-21-20
Safety Statements
26 · 26-39-45-36/37/39
RIDADR
1250 · UN 1250
WGK Germany
1 · 1
RTECS
4550000 · VV4550000
F
10 · 10-21
Autoignition Temperature
760 °F · >760 °F
TSCA
TSCA listed
HazardClass
3 · 3
PackingGroup
II
HS Code
29310095 · 29310095
Storage Class
3 · 3 - Flammable liquids
Hazard Classifications
3 InhalationAcute · Acute Tox. 3 InhalationAcute Tox. 4 DermalAcute Tox. 4 OralEye Dam. 1Flam. Liq. 2Skin Corr. 1ASTOT SE 3
Hazardous Substances Data
75 · 75-79-6(Hazardous Substances Data)
REACH Registrations
Active
Excepted Quantities
Not Permitted as Excepted Quantity

Highly flammable. Gives off irritating or toxic fumes (or gases) in a fire. Vapour/air mixtures are explosive.

Fire Potential · 2 items

... Silanes ... form spontaneously flammable ... mixtures with air. /Silanes/

... Trichlorosilane is highly flammable. /Trichlorosilane/

Health Hazards · 2 items

As with other chlorosilanes, acute exposures may be highly toxic and may cause death or permanent injury after very short exposures to small quantitites. Chronic exposures may be moderately toxic and involve irreversible and reversible changes. Skin contact may produce severe burns with pain and risk of secondary infections. Ingestion may produce oral, esophageal, and stomach burns, intensity will vary from mild to very severe, gastrointestinal damage is rare but may occur. (EPA, 1998)

· TOXIC and/or CORROSIVE; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death.

Hazards Summary · 1 item

Liquid may cause second or third degree burns after brief skin contact. [CHRIS] Reacts violently with water to release hydrogen chloride; Inhalation can cause acute pulmonary edema; [ICSC] Toxicity is due to HCl, which is released when methytrichlorosilane contacts moisture; [AIHA]

DOT ID and Guide1250 155
Reactive GroupChlorosilanes
EC ClassificationSymbol: F, Xi; R: 11-14-36/37/38; S: (2)-26-39
UN ClassificationUN Hazard Class: 3; UN Subsidiary Risks: 8; UN Pack Group: I
Special ReportsUSEPA; Chemical Profile: Methyltrichlorosilane (1985). Aspects covered in this data sheet: exposure limitations; personal protective equipment; fire hazards; fire fighting; disposal; first aid; spills.

Safety & protection

Fire Fighting · 2 items

Self-contained breathing apparatus is required as combustion/decomposition yields acid gases/pulmonary irritants. Corrosion-resistant protective clothing, as well as appropriate foot, hand, arm, head, eye, and face protection are required where contact is possible.

Use AFFF, powder, carbon dioxide. NO hydrous agents. NO water. In case of fire: keep drums, etc., cool by spraying with water. NO direct contact with water.

First Aid Measures · 4 items

Fresh air, rest. Half-upright position. Artificial respiration may be needed. Refer for medical attention.

Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer for medical attention .

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

Rinse mouth. Do NOT induce vomiting. Give nothing to drink. Refer for medical attention .

Accidental Release Measures · 2 items

· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.

· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.

First Aid · 2 items

Warning: In the presence of water, methyltrichlorosilane liberates hydrochloric acid, which is extremely corrosive. Caution is advised.

General First Aid:

Safe StorageFireproof. Separated from oxidants. Cool. Dry. Well closed.
Firefighting Hazards · 3 items

Vapors are heavier than air and may travel to a source of ignition and flash back.

Containers may explode in fire.

Reacts violently with fire extinguishing agents such as water.

Exposure Control and Personal Protection · 2 items

· Wear positive pressure self-contained breathing apparatus (SCBA).

TIH (Toxic Inhalation Hazard) - Term used to describe gases and volatile liquids that are toxic when inhaled. Some are TIH materials themselves, e.g., chlorine, and some release TIH gases when spilled in water, e.g., chlorosilanes. [ERG 2016].

Fire Fighting Procedures · 3 items

If material on fire or involved in fire: do not extinguish fire unless flow can be stopped. Use "alcohol" foam, dry chemical or carbon dioxide. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. Do not use water on material itself. If large quantities of combustibles are involved, use water in flooding quantities as spray and fog. Use water spray to knock-down vapors.

Use dry chemical, foam, carbon dioxide, or water spray. Water may be ineffective. Use water spray to keep fire exposed containers cool. Approach fire from upwind to avoid hazardous vapors and toxic decomposition products.

Aqueous film forming foam (AFFF). Powder. Carbon dioxide. NO hydrous agents. NO water.

Storage Conditions · 2 items

Fireproof ... Well closed.

Store in a cool, dry, well-ventilated location. Separate from acids, alkalies, oxidizing materials, and water. Outside or detached storage is preferred.

Cleanup Methods · 2 items

Evacuate danger area! Consult an expert! Collect leaking liquid in sealable, dry containers; do not use plastic containers. Absorb remaining liquid in dry sand or inert absorbent and remove to safe place. Do NOT wash away into sewer. (Extra personal protection: complete protective clothing including self-contained breathing apparatus.)

Eliminate all ignition sources. Stop or control the leak, if this can be done without undue risk. Use water spray to cool and disperse vapors and protect personnel. Control runoff and isolate discharged material for proper disposal.

Nonfire Spill ResponseExcerpt from ERG Guide 155 [Substances - Toxic and/or Corrosive (Flammable / Water-Sensitive)]:
Disposal Methods · 1 item

SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational exposure or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal, aquatic, and plant life; and conformance with environmental and public health regulations.

Toxicology

Environmental Fate · 3 items

TERRESTRIAL FATE: All silicon chlorides are immediately and completely hydrolyzed by water(1) and methyltrichlorosilane has been reported to hydrolyze in water releasing hydrochloric acid(2). Volatilization from moist soil surfaces, adsorption to soil and sediment as well as biodegradation are not expected to be important fate processes when compared to decomposition in water. Methyltrichlorosilane may volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 167 mm Hg(3).

AQUATIC FATE: All silicon chlorides are immediately and completely hydrolyzed by water(1) and methyltrichlorosilane has been reported to hydrolyze in water, releasing hydrochloric acid(2). Due to the rapid decomposition in water volatilization, bioconcentration and biodegradation are not expected to be important fate processes(SRC).

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), methyltrichlorosilane, which has a vapor pressure of 167 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase methyltrichlorosilane is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 36 days(SRC), calculated from its rate constant of 1.5X10-13 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Methyl silanes are transparent to UV radiation >290 nm(4) and therefore methyltrichlorosilane is not expected to undergo direct photolytic degradation(SRC).

Adverse EffectsDermatotoxin - Skin burns.
Exposure RoutesThe substance can be absorbed into the body by inhalation and by ingestion.
Ecotoxicity Excerpts/OTHER TOXICITY INFORMATION/ Rapid hydrolysis precludes measurements. Possible toxic effects may be due to formation of hydrochloric acid.
Signs and Symptoms · 4 items

Burning sensation. Cough. Sore throat. Laboured breathing. Shortness of breath. Symptoms may be delayed.

Redness. Blisters. Pain. Skin burns.

Redness. Pain. Severe deep burns.

Burning sensation. Abdominal pain. Shock or collapse.

Soil Adsorption/Mobility · 1 item

All silicon chlorides are immediately and completely hydrolyzed by water(1) and methyltrichlorosilane has been reported to hydrolyze in water releasing hydrochloric acid(2). Decomposition of methyltricholorsilane is expected to occur more rapidly than adsorption(SRC).

Human Toxicity Excerpts · 5 items

/SIGNS AND SYMPTOMS/ Causes severe eye and skin burns. May be harmful if absorbed through skin or inhaled. Irritating to skin, eyes, and respiratory system ...

/SIGNS AND SYMPTOMS/ If inhaled will cause difficult breathing. ... Ingestion causes severe burns of mouth and stomach.

/SIGNS AND SYMPTOMS/ Corrosive. Causes severe eye and skin burns. May be harmful if absorbed through skin or inhaled. Irritating to skin, eyes, and respiratory system. Symptoms of overexposure include coughing, wheezing, laryngitis, headache, nausea, vomiting, spasm, pulmonary inflammation, and edema.

/SIGNS AND SYMPTOMS/ ACUTE ... SYMPTOMS: Inhalation--Burning sensation. Cough. Sore throat. Labored breathing. Shortness of breath. Symptoms may be delayed ... Skin--Redness. Blisters. Pain. Skin burns; Eyes--Redness. Pain. Severe deep burns; Ingestion--Burning sensation. Abdominal pain. Shock or collapse.

/SIGNS AND SYMPTOMS/ ... /Methyltrichlorosilane/ is corrosive to the eyes, the skin and the respiratory tract. Corrosive on ingestion. Inhalation of this substance may cause lung edema ... The symptoms of lung edema often do not become manifest until a few hours have passed and they are aggravated by physical effort ... Exposure may result in death ...

Artificial Pollution SourcesMethyltrichlorosilane's production and use as an intermediate in silicone synthesis(1) may result in its release to the environment through various waste streams(SRC).
Environmental BioconcentrationMethyltrichlorosilane has been reported to hydrolyze immediately upon contact with water(1) and therefore bioconcentration of methyltrichlorosilane is not expected.
Volatilization from Water/Soil · 1 item

All silicon chlorides are immediately and completely hydrolyzed by water(1) and methyltrichlorosilane has been reported to hydrolyze in water, releasing hydrochloric acid(2). Decomposition of methyltricholorsilane is expected to occur more rapidly than volatilization(SRC). Methyltrichlorosilane may volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 167 mm Hg(3).

Non-Human Toxicity Excerpts · 5 items

/LABORATORY ANIMALS: Acute Exposure/ Methyl trichlorosilane has been tested by application of a small drop to rabbit eyes and has been found to cause severe damage.

/LABORATORY ANIMALS: Acute Exposure/ All these cmpd, even in very low doses ... caused severe burns of cornea and eyelids. ... /After/ application to the skin of the rabbit the region attacked by chlorosilanes blanches and then blisters appear ... /Chlorosilanes/

/LABORATORY ANIMALS: Acute Exposure/ Tests by application of a drop to rabbit eyes have been made on tetrachlorosilane, dichloridimethyl silane, dichlorodiethylsilane, methyltrichlorosilane, and ethyl trichlorosilane. All the chlorosilanes were found to cause severe damage of the cornea and lids. More severe damage was caused by the alkylchlorosilanes than by tetrachlorosilane (silicone tetrachloride). The principal danger is from splash contamination. /Chlorosilanes/

/GENOTOXICITY/ The synthetic and degradative intermediates of polydimethylsiloxanes were assessed for genotoxic potential using in vitro microbial assay techniques. The compounds were tested with and without S-9 activation. Salmonella typhimurium strains TA 1535, TA 1537, TA 1538, TA 98, and TA 100 were used for reverse mutation assays according the method of Ames. Saccharomyces cerevisiae strain D4 provided a parallel for the Ames mutation assay in diploid eukaryotic cells. The Escherichia coli pol-A repair assay tested for chemically induced DNA damage using the mutant strain P3078. Tissue culture assays were performed using Fischer L5178Y mouse lymphoma cells. The test compounds included hydrochloric acid, trimethylchlorosilane, trimethylsilanol, dimethyldichlorosilane, dimethyldiethoxysilane, methyltrichlorosilane, methyltriethoxysilane, silicon tetrachloride, hexamethyldisiloxane, silane hydrolysate, hexamethylcyclotrisiloxane, octamethylcyclotetrasiloxane, and decamethylcyclopentasiloxane. None of the organosilicon test compounds produced any significant increase in the incidence of reverse mutation, mitotic recombination, or DNA damage as assessed by the microbial assays, nor did any agent produce a significant increase in mutant colonies in the mouse lymphoma studies. Dose related increases in sister chromatid exchanges were observed for trimethylsilanol without S-9 activation, methyltriethoxysilane with S-9 activation, and for dimethyldiethoxysilane, methyltrichlorosilane, silicon tetrachloride, and hexamethylcyclotrisiloxane in the presence and absence of S-9. Dose related increases in chromosome aberrations were observed after treatment with trimethylchlorosilane in the absence of S-9 and after trimethylsilanol and dimethyldichlorosilane with and without S-9. /It was/ concluded that none of the compounds tested are mutagenic although some exhibit in vitro clastogenic activity.

/GENOTOXICITY/ The clastogenic activity of several organosilicon compounds was investigated using in-vivo cytogenetic tests. The test compounds included methyltrichlorosilane, dimethyldichlorosilane, trimethylchlorosilane, trimethylsilanol, hexamethyldisiloxane, and hexamethylcyclotrisiloxane (541059). Male Sprague-Dawley-rats received intraperitoneal injections of the test chemicals, and bone marrow samples were collected at 6, 24, and 48 hours. Chromosomes were prepared using standard air drying methods. Confirmatory bone marrow chromosome assays and the dominant lethal test were used to evaluate the in-vivo clastogenic potential of trimethylsilanol. Chromosomes were harvested after intraperitoneal injections of the agent at concentrations of 300, 400, and 500 mg/kg, and a 9 week dosing schedule prior to mating was used for the dominant lethal study. No significant, dose related increase in chromosome damage was observed for any of the agents tested. Simple chromatid gaps and breaks were the predominant type of damage. Neither the bone marrow chromosome assay nor the dominant lethal test revealed any clastogenic activity for trimethylsilanol. The authors conclude that all the agents tested lack clastogenic activity.

Environmental Abiotic Degradation · 1 item

The rate constant for the vapor-phase reaction of methyltrichlorosilane with photochemically-produced hydroxyl radicals has been estimated as 1.5X10-13 cu cm/molecule-sec at 25 °C(SRC) using a structure estimation method(1). This corresponds to an atmospheric half-life of about 36 days at an atmospheric concentration of 5X10+5 hydroxyl radicals per cu cm(1). All silicon chlorides are immediately and completely hydrolyzed by water(2) and methyltrichlorosilane has been reported to hydrolyze in water, releasing hydrochloric acid(3). Methyl silanes are transparent to UV radiation >290 nm(4) and therefore methyltrichlorosilane is not expected to undergo direct photolytic degradation(SRC).

Regulatory information

CERCLA Reportable Quantities · 1 item

Releases of CERCLA hazardous substances are subject to the release reporting requirement of CERCLA section 103, codified at 40 CFR part 302, in addition to the requirements of 40 CFR part 355. Methyltrichlorosilane is an extremely hazardous substance (EHS) subject to reporting requirements when stored in amounts in excess of its threshold planning quantity (TPQ) of 500 lbs.

DHS Chemicals of Interest (COI) · 6 items

Methyltrichlorosilane

1

10000

A Commercial Grade

A Placarded Amount

Flammable chemical that can be released at a facility.

Safety data

F
10-21
PPE
Faceshields, Gloves, Goggles, type ABEK (EN14387) respirator filter
wgk
1
tsca
TSCA listed
rtecs
VV4550000
ridadr
UN 1250
hs_code
29310095
risk_code
11-14-36/37/38-37-35-22-21-20
Signal word
Danger
Symbol(GHS)
GHS02,GHS05,GHS06
hazard_code
F,Xi,C
safety_code
26-39-45-36/37/39
hazard_class
3
Storage Class
3 - Flammable liquids
packing_group
II
target organs
Respiratory system
Hazard statements
H330-H302+H312-H315-H319-H335-H225-H290
Excepted Quantities
Not Permitted as Excepted Quantity
REACH Registrations
Active
Hazard Classifications
Acute Tox. 3 InhalationAcute Tox. 4 DermalAcute Tox. 4 OralEye Dam. 1Flam. Liq. 2Skin Corr. 1ASTOT SE 3
Autoignition Temperature
>760 °F
Precautionary statements
P501-P260-P270-P240-P210-P233-P234-P243-P241-P242-P271-P264-P280-P284-P370+P378-P390-P337+P313-P305+P351+P338-P362+P364-P303+P361+P353-P332+P313-P301+P312+P330-P304+P340+P310-P403+P233-P403+P235-P406-P405
Hazardous Substances Data
75-79-6(Hazardous Substances Data)

All Other Basic Inorganic Chemical Manufacturing

Silane, trichloromethyl-: ACTIVE

Applications · 5 items

DescriptionMethyltrichlorosilane is a colorless liquid witha sharp hydrochloric acid-like odor. Molecularweight 5 149.48; Boiling point = 66℃; Freezing/Meltingpoint 5290℃; Vapor pressure 5 146.7 mmHg at 18℃;Flash point = 2 6.2℃; 2 8℃ (cc); Autoignition temperature $404℃. Explosive limits: LEL 5 7.6%; UEL $20%.Hazard Identification (based on NFPA-704 M RatingSystem): Health 3, Flammability 3, Reactivity 2 . Reactswith water.

UsesIntermediate for silicones.

UsesMethyltrichlorosilane is widely used as precursor to organosilicon compounds; silylating agent and Lewis acid. MeSiCl3 is an effective Lewis acid in the condensation of carboxylic acids with alcohols and amines.

UsesMethyltrichlorosilane is used in production of methyl silicone resins, its vapor reacts with water on surfaces to give a thin layer of methylpolysiloxane which make it a water-repellent film. A combination of methyltrichlorosilane and sodium iodide can be used to cleave carbon-oxygen bonds such as methyl ethers. It is used as a precursor for forming various cross-linked siloxane polymers. Trichloromethylsilane is the starting material for the production of pure silicon for manufacture of semiconductors and optical fibers.

General DescriptionA colorless fuming liquid with a pungent odor. Flash point 8°F. Vapor and liquid may cause burns. Denser than water. Vapors are heavier than air.

Upstream & downstream products

Upstream raw materials

SiliconCopper(I) chlorideChloromethaneDichloromethyl-n-propylsilane3-Chloropropylmethyldichlorosilane1,1,2,2-Tetrachloro-1,2-dimethyldisilaneDichloromethylphenylsilaneTrichlorosilaneDichloromethylsilane

Downstream products

Dispersing agent WAPoly-methyltriethoxysilaneMethyltris(methylethylketoxime)silaneDimethoxymethylphenylsilaneSilicon carbideMethyltriethoxysilaneMethyltrimethoxysilaneDichlorodimethylsilaneMethyltriacetoxysilaneMethylsilaneChloromethyldichloromethylsilane