HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Compound

2-sec-Butylphenol

HCID 6984
New reaction
Print
Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
53466-96-9
Standard SMILES
CCC(C)c1ccccc1O
InChIKey
NGFPWHGISWUQOI-UHFFFAOYSA-N
Molecular formula
C10H14O
Average molar mass
150.22 g/mol
Monoisotopic mass
150.10446507

Overview

O-sec-butylphenol is a clear colorless liquid. (NTP, 1992)

Names & identifiers

Preferred name
2-sec-Butylphenol
IUPAC
2-butan-2-ylphenol
English name
2-sec-Butylphenol
Molecular formula
C10H14O
Molecular weight
150.22

Names & synonyms

2-sec-Butylphenol89-72-5o-sec-Butylphenol2-(butan-2-yl)phenol2-(1-METHYLPROPYL)PHENOL2-(2-Butyl)phenolPhenol, 2-(1-methylpropyl)-2-butan-2-ylphenol2-sec.ButylfenolDTXSID2022331ortho-sec-butylphenol025P24OTM5
Show more names
OSBP2-(1-methylpropyl)-PhenolO-S-BUTYLPHENOLo-sec-butyl-pheno2-sek.Butylphenol0-sec-butylphenol
DTXCID102331CHEBI:34303RefChem:483531201-933-82-(sec-Butyl)phenolPhenol, o-sec-butyl-MFCD00002225o-sec.-butylphenol

Database identifiers

CAS
53466-96-9、89-72-5
PubChem CID
6984
DTXSID
DTXSID2022331
ChEMBL
CHEMBL30193
ChEBI
CHEBI:34303
UNII
025P24OTM5
EC Number
201-933-8
Nikkaji
J3.214J

Properties

Computed structural properties

XLogP
3.4
Topological polar surface area
20.2 Ų
Hydrogen bond donors
1
Hydrogen bond acceptors
1
Rotatable bonds
2
Heavy atoms
11
Formal charge
0
Complexity
111

Experimental & physicochemical properties

Chemical Classes · 2 items

Other Classes -> Phenols

Corrosives

Fragrances · 2 items

Fragrance Ingredient (Phenol, 2-(1-methylpropyl)-) -> IFRA transparency List

Fragrance

LogP · 3 items

log Kow = 3.27

3.27

3.27

Density · 5 items

0.981 at 77 °F (NTP, 1992) - Less dense than water; will float

0.9804 kg/l @ 25 °C

Relative density (water = 1): 0.98

0.981

0.89

Color/Form · 3 items

LIQUID

Amber-colored liquid

Colorless liquid or solid (below 61 degrees F).

Solubility · 5 items

less than 1 mg/mL at 68 °F (NTP, 1992)

INSOL IN WATER; SOL IN ALCOHOL, ETHER & ALKALIES

Insoluble in water, slightly soluble in alcohol, ether, and alkalies.

Solubility in water: none

Insoluble

Flash Point · 5 items

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 6 items

This chemical does not meet GHS hazard criteria for 1.2% (4 of 338) of reports.

Danger

H302 (87.9%): Harmful if swallowed [Warning Acute toxicity, oral]

P260, P261, P264, P264+P265, P270, P271, P273, P280, P301+P317, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P317, P321, P330, P362+P364, P363, P391, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 338 reports by companies from 13 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Danger

Hazard information

Regulatory Information · 5 items

Chemical: Phenol, 2-(1-methylpropyl)-

Phenol, 2-(1-methylpropyl)- is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Phenol, 2-(1-methylpropyl)- are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

REACH registered substance: 2-sec-butylphenol (EC: 201-933-8)

Phenol, 2-(1-methylpropyl)-: Does not have an individual approval but may be used as a component in a product covered by a group standard. It is not approved for use as a chemical in its own right.

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

Other Safety InformationEvaluation - Propyl and butyl phenols
DOT LabelCorrosive
Fire Hazards · 2 items

This chemical is combustible. (NTP, 1992)

Combustible.

Chemistry & industry

Uses & manufacturing

Uses · 5 items

Used as a chemical intermediate in the production of resins, plasticizers, and surface active agents; [ACGIH]

CHEMICAL INTERMEDIATE IN PREPN OF RESINS, PLASTICIZERS, SURFACE ACTIVE AGENTS & OTHER PRODUCTS

Derivatives: 2-s-butyl-1-vinylcyclohexyl acetate; dinoseb; fenobucarb.

Chemical intermediate in preparation of resins, plasticizers, surface-active agents.

The main use of 2-(1-methylpropyl)phenol is in the synthesis of insecticides, acaricides, and herbicides.

U.S. Production2023: 5,500,000 - <7,000,000 lb
Industry UsesIntermediate
Methods of ManufacturingPhenol + 1-butene (orthoalkylation)
Formulations/Preparations · 2 items

2-(1-Methylpropyl)phenol is obtained with high selectivity by reaction of phenol with n-butenes at 250-300 °C using gamma- aluminum trioxide as catalyst and at a pressure of 3.5-8.0 Mpa which keeps both reactants in the liquid phase.

Product purity is about 98%.

Use ClassificationFragrance Ingredients
General Manufacturing Information · 3 items

Plastics Material and Resin Manufacturing

Phenol, 2-(1-methylpropyl)-: ACTIVE

Phenol, 2-methyl(1-methylethyl)-: INACTIVE

Applications · 4 items

UsesChemical intermediate in preparation of resins, plasticizers, surface-active agents.

UsesHerbicide, Insecticide, Polymerization Inhibitor, Stabilizer Intermediate

Related reactions

15 records
New reaction record
HRID 54028 reaction equation
HRID 54028As reactant
HRID 94485 reaction equation
HRID 94485As product
HRID 98292 reaction equation
HRID 98292As reactant
HRID 140501 reaction equation
HRID 140501As reactant
HRID 1149017 reaction equation
HRID 1149017As reactant
HRID 1290268 reaction equation
HRID 1290268As reactant
HRID 1429104 reaction equation
HRID 1429104As product
HRID 1429105 reaction equation
HRID 1429105As product
PreviousPage 1 of 2

Compound notes

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes

234 °F (NTP, 1992)

234 °F

107 °C

225 °F

225 °F

Boiling Point · 5 items

439 to 442 °F at 760 mmHg (NTP, 1992)

224-237 °C

224-237 °C

439-442 °F

227 °F

Melting Point · 5 items

54 °F (NTP, 1992)

14 °C

14 °C

57 °F

61 °F

Vapor Density · 2 items

Relative vapor density (air = 1): 5.2

5.2

Vapor Pressure · 5 items

Low (NIOSH, 2024)

0.05 [mmHg]

Vapor pressure, Pa at 20 °C: 10

Low

Low

Refractive IndexIndex of refraction = 1.5182 @ 21 °C

Physicochemical properties

Melting point
16 °C; · 16 °C; 61 °F; 289 K
Boiling point
230 °C · 230 °C (446 °F; 503 K)
Density
0.97724 g/cm3 · 0.97724 g/cm3 (20 °C)
vapor pressure
0.03 mm · 0.03 mm Hg ( 20 °C)
refractive index
1.5228 · 1.5228 (20 °C)
Flash point
107 °C; · 107 °C; 225 °F; 380 K
storage temp.
RT, stored under nitrogen
pka
10.36 · 10.36±0.35(Predicted)
form
liquid or solid
color
Colorless to amber-colored
optical activity
Consistent with structure
Water Solubility
0.1 g/100 · Insoluble. <0.1 g/100 mL at 20 ºC
BRN
1210026 · 1210026
Henry's Law Constant
4.7 · 4.7×100 mol/(m3Pa) at 25℃, HSDB (2015)
Exposure limits
30 mg/m3 · PC-TWA:30 mg/m3
Stability
Stable, but air sensitive. Incompatible with acid chlorides, acid anhydrides, bases, strong oxidizing agents, copper and its alloys, brass.
InChI
1S/C10H14O/c1-3-8(2)9-6-4-5-7-10(9)11/h4-8,11H,3H2,1-2H3
InChIKey
NGFPWHGISWUQOI-UHFFFAOYSA-N
SMILES
CCC(C)c1ccccc1O
LogP
3 at · 3 at 20℃
CAS DataBase Reference
89 · 89-72-5(CAS DataBase Reference)
EWG's Food Scores
1 · 1
FDA UNII
25 P24OTM5 · 025P24OTM5
NIST Chemistry Reference
2 · Phenol, 2-(1-methylpropyl)-(89-72-5)
EPA Substance Registry System
o-sec-Butylphenol (89-72-5)
UNSPSC Code
12352100 · 12352100
NACRES
22 · NA.22
Symbol(GHS)
5 · GHS05,GHS07
Signal word
Danger
Hazard statements
302 · H302-H314
Precautionary statements
270 · P270-P280-P301+P312-P303+P361+P353-P304+P340+P310-P305+P351+P338
PPE
Faceshields, Gloves, Goggles, type ABEK (EN14387) respirator filter
Hazard Codes
C
Risk Statements
20 · 20/21/22-34-22
Safety Statements
26 · 26-27-28-36/37/39-45
OEB
A
OEL
5 ppm · TWA: 5 ppm (30 mg/m3) [skin]
RIDADR
3145 · UN 3145 8/PG 2
WGK Germany
2 · 2
RTECS
8920000 · SJ8920000
TSCA
TSCA listed
HazardClass
8 · 8
PackingGroup
III
HS Code
2907191090 · 2907191090
Storage Class
8 A · 8A - Combustible corrosive hazardous materials
Hazard Classifications
4 OralSkin · Acute Tox. 4 OralSkin Corr. 1C
Hazardous Substances Data
89 · 89-72-5(Hazardous Substances Data)
REACH Registrations
Active
Limited Quantities
5 L · 5.0 L (1.3 gallons) (liquid) or 5.0 kg (11 lbs) (solid)
Excepted Quantities
Max Inner Pack (30g or 30ml) and Max Outer Pack (1Kg or 1L)
Health HazardsExcerpt from NIOSH Pocket Guide for o-sec-Butylphenol:
Hazards SummaryMay cause skin burns; [NIOSH] An irritant that may cause skin burns; [CAMEO] In animal studies, skin exposure for 24 hours causes severe skin irritation. [CHEMINFO]
Reactive GroupPhenols and Cresols
UN ClassificationUN Hazard Class: 8; UN Pack Group: III
TSCA Requirements · 2 items

Section 8(a) of TSCA requires manufacturers of this chemical substance to report preliminary assessment information concerned with production, use, and exposure to EPA as cited in the preamble in 51 FR 41329.

Pursuant to section 8(d) of TSCA, EPA promulgated a model Health and Safety Data Reporting Rule. The section 8(d) model rule requires manufacturers, importers, and processors of listed chemical substances and mixtures to submit to EPA copies and lists of unpublished health and safety studies. o-sec-Butylphenol is included on this list.

Reactivity Profile · 1 item

Phenols, such as O-SEC-BUTYLPHENOL, do not behave as organic alcohols, as one might guess from the presence of a hydroxyl (-OH) group in their structure. Instead, they react as weak organic acids. Phenols and cresols are much weaker as acids than common carboxylic acids (phenol has pKa = 9.88). These materials are incompatible with strong reducing substances such as hydrides, nitrides, alkali metals, and sulfides. Flammable gas (H2) is often generated, and the heat of the reaction may ignite the gas. Heat is also generated by the acid-base reaction between phenols and bases. Such heating may initiate polymerization of the organic compound. Phenols are sulfonated very readily (for example, by concentrated sulfuric acid at room temperature). The reactions generate heat. Phenols are also nitrated very rapidly, even by dilute nitric acid.

Chemical DangersReacts with oxidants. Reacts violently with bases, acid anhydrides and acid chlorides. Attacks steel and copper and its alloys.
Flammable LimitsClass IIB Combustible Liquid Combustible Solid

Safety & protection

Fire Fighting · 2 items

Fires involving this compound should be controlled with a dry chemical, carbon dioxide or halon extinguisher. (NTP, 1992)

Use carbon dioxide, foam, powder.

First Aid Measures · 4 items

Fresh air, rest. Refer for medical attention.

Remove contaminated clothes. Rinse and then wash skin with water and soap. Refer for medical attention .

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

Rinse mouth. Do NOT induce vomiting. Refer for medical attention .

First Aid · 2 items

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

(General first aid procedures)

Safe StorageSeparated from acid anhydrides, acid chlorides, bases and food and feedstuffs.
Nonfire Spill Response · 1 item

SMALL SPILLS AND LEAKAGE: If you spill this chemical, FIRST REMOVE ALL SOURCES OF IGNITION. Then, use absorbent paper to pick up all liquid spill material. Your contaminated clothing and absorbent paper should be sealed in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with 60-70% ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.

Disposal Methods · 1 item

SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.

Spillage Disposal · 1 item

Collect leaking and spilled liquid in sealable containers as far as possible. Sweep spilled substance into covered containers. Carefully collect remainder. Then store and dispose of according to local regulations. Personal protection: chemical protection suit.

Preventive Measures · 2 items

The worker should immediately wash the skin when it becomes contaminated.

Work clothing that becomes wet or significantly contaminated should be removed and replaced.

Isolation and EvacuationExcerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]:
Eye PreventionWear face shield.
Fire PreventionNO open flames.
Inhalation RiskA harmful contamination of the air will not or will only very slowly be reached on evaporation of this substance at 20 °C.

Toxicology

Target OrgansEyes, skin, respiratory system
Environmental Fate · 3 items

TERRESTRIAL FATE: Based on a recommended classification scheme(1), an estimated Koc value of 1400(SRC), determined from an experimental log Kow(2) and a recommended regression-derived equation(3), indicates that 2-(1-methylpropyl)phenol will have low mobility in soil(SRC). Volatilization of 2-(1-methylpropyl)phenol from moist soil surfaces will be slow(SRC) given an estimated Henry's Law constant of 2.1X10-6 atm-cu m/mole(4,SRC). Limited data, mainly derived by analogy to 4-s-butylphenol, indicate that 2-(1-methylpropyl)phenol may be resistant to biodegradation by non-adapted microbial populations(SRC). Resting cells of a Pseudomonas strain obtained by selective enrichment with 4-hydroxybenzoate as the sole carbon source, were able to biodegrade 2-(1-methylpropyl)phenol (oxygen uptake rate of 42 nmol O2/min/mg protein)(5). A structurally similar compound, 4-s-butylphenol (at 100 mg/L) was not biodegraded over a 2 week period using an activated sludge inoculum(6); however, a phenol-adapted yeast strain, isolated from soil, readily oxidized 4-s-butylphenol (present at 1 mmole) without a lag period(7).

AQUATIC FATE: Based on a recommended classification scheme(1), an estimated Koc value of 1400(SRC), determined from an experimental log Kow(2) and a recommended regression-derived equation(3), indicates that 2-(1-methylpropyl)phenol would adsorb to suspended solids and sediment(SRC) in the water. 2-(1-Methylpropyl)phenol may volatilize from water surfaces based on an estimated Henry's Law constant of 2.1X10-6 atm-cu m/mole(SRC), developed using a fragment constant estimation method(4). Estimated half-lives for a model river and model lake are 21 and 160 days, respectively(3,SRC). Limited data, mainly derived by analogy to 4-s-butylphenol, indicate that 2-(1-methylpropyl)phenol may be resistant to biodegradation by non-adapted microbial populations(SRC). A 4-hydroxybenzoate adapted Pseudomonas strain was able to biodegrade 2-(1-methylpropyl)phenol (oxygen uptake rate of 42 nmol O2/min/mg protein)(5). A structurally similar compound, 4-s-butylphenol (at 100 mg/L) was not biodegraded over a 2 week period using an activated sludge inoculum(6); however, a phenol-adapted yeast strain, isolated from soil, readily oxidized 4-s-butylphenol (present at 1 mmole) without a lag period(7). An estimated BCF value of 180(3,SRC), determined from an experimental log Kow(2), suggests that 2-(1-methylpropyl)phenol may bioconcentrate in aquatic organisms(SRC) according to a recommended classification scheme(8).

ATMOSPHERIC FATE: According to a suggested classification scheme(1), an estimated vapor pressure of 0.05 mm Hg at 25 °C(2,SRC) indicates that 2-(1-methylpropyl)phenol will exist mainly in the vapor phase in the ambient atmosphere. Vapor-phase 2-(1-methylpropyl)phenol is degraded in the atmosphere by reaction with photochemically produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be about 9 hours(3,SRC).

Adverse EffectsDermatotoxin - Skin burns.
Exposure Routes · 2 items

The substance can be absorbed into the body by inhalation of its vapour, through the skin and by ingestion.

inhalation, skin absorption, ingestion, skin and/or eye contact

Signs and Symptoms · 5 items

Cough. Sore throat.

Pain. Blisters. Skin burns.

Redness. Pain. Blurred vision. Severe deep burns.

Burning sensation in the throat and chest. Abdominal pain. Shock or collapse. Vomiting.

irritation eyes, skin, respiratory system; skin burns

ICSC Environmental DataEnvironmental effects from the substance have not been investigated adequately.
Soil Adsorption/Mobility · 1 item

The Koc of 2-(1-methylpropyl)phenol is estimated as approximately 1400(SRC), using an experimental log Kow of 3.27(1) and a regression-derived equation(2,SRC). According to a recommended classification scheme(3), this estimated Koc value suggests that 2-(1-methylpropyl)phenol has low mobility in soil(SRC).

Human Toxicity ExcerptsACUTE OCCUPATIONAL EXPOSURES HAVE RESULTED IN MILD RESP IRRITATION, AS WELL AS SKIN BURNS.
Artificial Pollution Sources · 1 item

2-(1-Methylpropyl)phenol's production and use as a chemical intermediate in the preparation of resins, plasticizers, surface-active agents(1) or as an intermediate in the synthesis of insecticides, acaricides, and herbicides(2) may result in its release to the environment through various waste streams(SRC).

Environmental Biodegradation · 1 item

Resting cells of a Pseudomonas strain, obtained by selective enrichment with 4-hydroxybenzoate as the sole carbon source, were able to biodegrade 2-(1-methylpropyl)phenol (oxygen uptake rate of 42 nmol O2/min/mg protein)(1). A structurally similar compound, 4-s-butylphenol (at 100 mg/L), was not biodegraded over a 2 week period using an activated sludge inoculum(2); however, a phenol-adapted yeast strain, isolated from soil, readily oxidized 4-s-butylphenol (present at 1 mmole) without a lag period(3).

Environmental Bioconcentration · 1 item

An estimated BCF value of 180 was calculated for 2-(1-methylpropyl)phenol(SRC), using an experimental log Kow of 3.27(1) and a recommended regression-derived equation(2). According to a recommended classification scheme(3), this BCF value suggests that bioconcentration in aquatic organisms may occur(SRC).

Volatilization from Water/Soil · 1 item

The Henry's Law constant for 2-(1-methylpropyl)phenol is estimated as 2.1X10-6 atm-cu m/mole(SRC) using a fragment constant estimation method(1). This value indicates that 2-(1-methylpropyl)phenol will volatilize from water surfaces(2,SRC). Based on this Henry's Law constant, the volatilization half-life from a model river (1 m deep, flowing 1 m/sec, wind velocity of 3 m/sec) is estimated as approximately 21 days(2,SRC). The volatilization half-life from a model lake (1 m deep, flowing 0.05 m/sec, wind velocity of 0.5 m/sec) is estimated as approximately 160 days(2,SRC). 2-(1-Methylpropyl)phenol's estimated vapor pressure, 0.05 mm Hg(3,SRC) and Henry's Law constant(1,SRC) indicate that volatilization from dry and moist soil will be slow(SRC).

Regulatory information

TSCA Requirements · 2 items

Section 8(a) of TSCA requires manufacturers of this chemical substance to report preliminary assessment information concerned with production, use, and exposure to EPA as cited in the preamble in 51 FR 41329.

Pursuant to section 8(d) of TSCA, EPA promulgated a model Health and Safety Data Reporting Rule. The section 8(d) model rule requires manufacturers, importers, and processors of listed chemical substances and mixtures to submit to EPA copies and lists of unpublished health and safety studies. o-sec-Butylphenol is included on this list.

Safety data

OEB
A
OEL
TWA: 5 ppm (30 mg/m3) [skin]
PPE
Faceshields, Gloves, Goggles, type ABEK (EN14387) respirator filter
wgk
2
tsca
TSCA listed
rtecs
SJ8920000
ridadr
UN 3145 8/PG 2
hs_code
2907191090
risk_code
20/21/22-34-22
Signal word
Danger
Symbol(GHS)
GHS05,GHS07
hazard_code
C
safety_code
26-27-28-36/37/39-45
hazard_class
8
Storage Class
8A - Combustible corrosive hazardous materials
packing_group
III
Hazard statements
H302-H314
Limited Quantities
5.0 L (1.3 gallons) (liquid) or 5.0 kg (11 lbs) (solid)
Excepted Quantities
Max Inner Pack (30g or 30ml) and Max Outer Pack (1Kg or 1L)
REACH Registrations
Active
Hazard Classifications
Acute Tox. 4 OralSkin Corr. 1C
Precautionary statements
P270-P280-P301+P312-P303+P361+P353-P304+P340+P310-P305+P351+P338
Hazardous Substances Data
89-72-5(Hazardous Substances Data)

UsesA chemical intermediate in the production of resins, plasticizers, and other products

General DescriptionClear colorless liquid.

Upstream & downstream products

Downstream products

Fenobucarb4,6-Dinitro-2-sec-butylphenol

Additional notes

DefinitionChEBI: A member of the class of phenols that is phenol carrying a butan-2-yl group at position 2.