HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.0
  1. Home
  2. /Compound

4-Hydroxybiphenyl

HCID 7103
New noteNew reactionRequest quotes
Print preview
Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
1322-20-9
Standard SMILES
Oc1ccc(-c2ccccc2)cc1
InChIKey
YXVFYQXJAXKLAK-UHFFFAOYSA-N
Molecular formula
C12H10O
Average molar mass
170.21 g/mol
Monoisotopic mass
170.07316494

Overview

Biphenyl-4-ol is a member of the class of hydroxybiphenyls that is biphenyl carrying a hydroxy group at position 4.

Names & identifiers

Preferred name
4-Hydroxybiphenyl
IUPAC
4-phenylphenol
English name
4-Phenylphenol
Molecular formula
C12H10O
Molecular weight
170.21

Names & synonyms

4-Phenylphenol92-69-3[1,1'-Biphenyl]-4-ol4-HYDROXYBIPHENYLBiphenyl-4-olp-Phenylphenol4-Biphenylolp-Hydroxybiphenylp-Hydroxydiphenyl4-HydroxydiphenylParaxenolp-Biphenylol
Show more names
4-pp(1,1’-Biphenyl)-4-olp-Xenol
4-Diphenylolpara-Phenylphenolpara-HydroxydiphenylTetrasin P 300Tetrosin P 300Biphenyl, 4-hydroxy-(1,1'-Biphenyl)-4-olDTXSID7021152

Database identifiers

CAS
1322-20-9、92-69-3
PubChem CID
7103
DTXSID
DTXSID7021152
ChEMBL
CHEMBL73380
ChEBI
CHEBI:34422
UNII
50LH4BZ6MD
EC Number
202-179-2、215-333-9
Nikkaji
J3.561K

Properties

Computed structural properties

XLogP
3.2
Topological polar surface area
20.2 Ų
Hydrogen bond donors
1
Hydrogen bond acceptors
1
Rotatable bonds
1
Heavy atoms
13
Formal charge
0
Complexity
141

Experimental & physicochemical properties

Chemical ClassesOther Classes -> Other Aromatic Compounds
SpringerMaterials Properties13C nuclear magnetic resonance spectrum
LogP · 2 items

Log Kow = 3.20

3.33

Density · 2 items

1.27 kg/l @ 25 °C

1.27 @25 °C

Color/Form · 3 items

NEARLY WHITE CRYSTALS

NEEDLES OR PLATES FROM DILUTE ALCOHOL

White flakes

Solubility · 4 items

SLIGHTLY SOL IN PETROLEUM ETHER; VERY SOL IN ALCOHOL, ETHER, CHLOROFORM & PYRIMIDINE

SOL IN ALCOHOL, ALSO IN ALKALIES & MOST ORGANIC SOLVENTS; INSOLUBLE IN WATER

Soluble in oxygenated solvents.

Water solubility = 56.2 mg/l

Flash Point · 2 items

165.5 °C

330 °F

Endocrine DisruptorsPotential endocrine disrupting compound

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 4 items

Warning

H315 (98.4%): Causes skin irritation [Warning Skin corrosion/irritation]

P261, P264, P264+P265, P271, P273, P280, P302+P352, P304+P340, P305+P351+P338, P319, P321, P332+P317, P337+P317, P362+P364, P391, P403+P233, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 124 reports by companies from 10 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Hazard information

Regulatory Information · 4 items

Chemical: [1,1'-Biphenyl]-4-ol

[1,1'-Biphenyl]-4-ol is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of [1,1'-Biphenyl]-4-ol are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

Status: Cease Manufacture Update: 29-05-2013 https://echa.europa.eu/registration-dossier/-/registered-dossier/11340

[1,1'-Biphenyl]-4-ol: Does not have an individual approval but may be used under an appropriate group standard

Hazards SummaryA tumorigen; Intraperitoneal LD50 (mouse) = 150 mg/kg; [RTECS] Emergency treatment: see Biphenyl. [HSDB] An irritant; [MSDSonline] See Biphenyl.
TSCA Requirements · 1 item

Pursuant to section 8(d) of TSCA, EPA promulgated a model Health and Safety Data Reporting Rule. The section 8(d) model rule requires manufacturers, importers, and processors of listed chemical substances and mixtures to submit to EPA copies and lists of unpublished health and safety studies. (1,1'-Biphenyl)-4-ol is included on this list.

Hazard Classes and CategoriesSkin Irrit. 2 (98.4%)

Chemistry & industry

Pharmacology

Mechanism of Action · 1 item

The cytotoxic effects of biphenyl (BP) and its hydroxylated derivatives, o-phenylphenol (OPP), m-phenylphenol (MPP) and p-phenylphenol PPP) ... were investigated in freshly isolated rat hepatocytes. OPP, MPP and PPP, at concn of 0.75 mM, resulted in the loss of intracellular ATP, glutathione (GSH) and protein thiols, causing cell death. OPP epoxide and BP were less toxic than the OPP isomers. MPP or PPP compared with OPP caused serious impairments in oxidative phosphorylation in mitochondria isolated from rat liver. ... These results indicate that the addition of a hydroxyl group to the aromatic ring of BP enhances BP induced cytotoxicity and that the mitochondria are a common target of OPP isomers and other BP derivatives. In addition, the para- or meta-hydroxyl groups rather than the ortho-hyroxyl group incr the toxicity. ...

Metabolism/Metabolites · 6 items

RAT OR RABBIT LIVER HOMOGENATE OR MICROSOMES FORMED AS THE ONLY METABOLITE 4-HYDROXYBIPHENYL. THIS WAS ALSO THE ONLY SIGINIFICANT BIPHENYL METABOLITE IN ACID-HYDROLYZED RATS URINE.

BIPHENYL 2- & 4-HYDROXYLASE ACTIVITIES & CYTOCHROME P450 CONCN IN MICROSOMES WERE INCR BY ORAL DOSES OF LESS THAN 1 UG TCDD (2,3,7,8-TETRACHLORODIBENZO-P-DIOXIN, A CONTAMINANT OF HERBICIDE 2,4,5-T)/KG.

THE ORDER OF PREFERENCE FOR POSITION OF HYDROXYLATION OF BIPHENYL BY LIVER MICROSOMES OF RATS, RABBITS, & GUINEA PIGS WAS 4-, 3-, 2-. AFTER FEEDING BIPHENYL TO RABBITS & MICE, GLUCURONIDES OF HYDROXYLATED METABOLITES WERE FOUND IN THE URINE.

4-HYDROXYBIPHENYL & 2-HYDROXYBIPHENYL CAN EXIST IN NATURE AS FUNGAL METABOLITES OF BIPHENYL.

For more Metabolism/Metabolites (Complete) data for 4-HYDROXYBIPHENYL (14 total), please visit the HSDB record page.

4-Phenylphenol has known human metabolites that include (2S,3S,4S,5R)-3,4,5-Trihydroxy-6-(4-phenylphenoxy)oxane-2-carboxylic acid.

Uses & manufacturing

Uses · 6 items

Used in rubber chemicals, fungicides, and in the production of dyes, varnish resins, and nonionogenic emulsifiers; [HSDB]

Farming (Pesticides) [Category: Industry]

AS INTERMEDIATE IN MFR OF RESINS; ALSO IN RUBBER INDUSTRY

Related reactions

271 records
New reaction record
HRID 14592 reaction equation
HRID 14592As reactantuspto-grants-2010_06
HRID 16283 reaction equation
HRID 16283As reactantuspto-grants-2010_06
HRID 17729 reaction equation
HRID 17729As reactantuspto-grants-2010_06
HRID 64693 reaction equation
HRID 64693As reactantuspto-grants-1986_09
HRID 101740 reaction equation
HRID 101740As reactantTraining data from https://doi.org/10.1039/C8SC04228D (2/10)
HRID 108810 reaction equation
HRID 108810As reactantTraining data from https://doi.org/10.1039/C8SC04228D (2/10)
HRID 116514 reaction equation
HRID 116514As reactantTraining data from https://doi.org/10.1039/C8SC04228D (2/10)
HRID 119250 reaction equation
HRID 119250As reactantTraining data from https://doi.org/10.1039/C8SC04228D (2/10)
Page 1 of 34

Compound notes

Loading…

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
More actions
New noteNew reactionRequest quotes
Boiling Point
305-308 °C
Melting Point164-165 °C
Vapor Pressure0.0000188 [mmHg]
Food Contact SubstancesFCS -> FDA Inventory of Food Contact Substances Listed in 21 CFR

Physicochemical properties

Melting point
164 · 164-166 °C (lit.)
Boiling point
321 °C · 321 °C (lit.)
Density
1.0149 · 1.0149 (rough estimate)
vapor pressure
0 Pa · 0Pa at 25℃
refractive index
1.6188 · 1.6188 (estimate)
Flash point
330 °F · 330 °F
storage temp.
Sealed in dry,Room Temperature
solubility
50 mg/mL, · methanol: soluble50mg/mL, clear, colorless
form
Flakes
pka
9.55 · 9.55(at 25℃)
color
White to slightly yellow
PH
7 · 7 (0.7g/l, H2O, 20℃)
Water Solubility
0.7 g/L · 0.7 g/L (20 ºC)
Merck
14 · 14,7305
BRN
1907452 · 1907452
Henry's Law Constant
1.6 · 1.6×10-1 mol/(m3Pa) at 25℃, Mackay et al. (2006)
Stability
Stable. Incompatible with strong oxidizing agents, strong bases, halogens. Combustible.
InChI
1S/C12H10O/c13-12-8-6-11(7-9-12)10-4-2-1-3-5-10/h1-9,13H
InChIKey
YXVFYQXJAXKLAK-UHFFFAOYSA-N
SMILES
Oc1ccc(cc1)-c2ccccc2
LogP
3.6 at · 3.6 at 25℃
Indirect Additives used in Food Contact Substances
4 · 4-PHENYLPHENOL
FDA 21 CFR
175.3 · 175.300; 177.2600
CAS DataBase Reference
92 · 92-69-3(CAS DataBase Reference)
EWG's Food Scores
2 · 2
FDA UNII
50 LH4BZ6MD · 50LH4BZ6MD
NIST Chemistry Reference
p-Hydroxybiphenyl(92-69-3)
EPA Substance Registry System
4 · 4-Phenylphenol (92-69-3)
UNSPSC Code
41116107 · 41116107
NACRES
24 · NA.24
Symbol(GHS)
7 · GHS07,GHS09
Signal word
Warning
Hazard statements
315 · H315-H317-H411
Precautionary statements
261 · P261-P264-P272-P273-P280-P302+P352
PPE
95 · dust mask type N95 (US), Eyeshields, Gloves
Hazard Codes
Xi,N
Risk Statements
36 · 36/37/38-51/53-38
Safety Statements
26 · 26-36/37-61-36
RIDADR
3077 · UN3077
WGK Germany
2 · 2
RTECS
5850000 · DV5850000
TSCA
TSCA listed
HazardClass
9 · 9
PackingGroup
III
HS Code
29071900 · 29071900
Storage Class
13 · 13 - Non Combustible Solids
Hazard Classifications
2 Skin · Aquatic Chronic 2Skin Irrit. 2Skin Sens. 1B
Hazardous Substances Data
92 · 92-69-3(Hazardous Substances Data)
Toxicity
50 ipr-mus: · LD50 ipr-mus: 150 mg/kg NTIS** AD691-490
REACH Registrations
Active
Limited Quantities
5 L · 5.0 L (1.3 gallons) (liquid) or 5.0 kg (11 lbs) (solid)
Excepted Quantities
Max Inner Pack (30g or 30ml) and Max Outer Pack (1Kg or 1L)

Safety & protection

Disposal Methods · 1 item

SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.

Protective Action Criteria (PAC) · 3 items

0.49 [mg/m3]

5.4 [mg/m3]

32 [mg/m3]

Toxicology

Environmental Fate · 3 items

TERRESTRIAL FATE: Based on a recommended classification scheme(1), an estimated Koc value of 1300(SRC), determined from a measured log Kow(2) and a recommended regression-derived equation(3), indicates that 4-hydroxybiphenyl will have low mobility in soil(SRC). Based on limited data, 4-hydroxybiphenyl may be resistant to biodegradation under aerobic conditions(SRC). 4-Hydroxybiphenyl at 30 mg/L was inoculated with activated sludge; over 4 weeks, 0% of the theoretical BOD was obtained(4). A pure Pseudomonas culture, however, was able to utilize 4-hydroxybiphenyl as a sole carbon source(5). 4-Hydroxybiphenyl's values for vapor pressure(6) and Henry's Law constant(7,SRC) indicate that volatilization from dry and moist soil surfaces is not likely to be a major fate process for this compound(SRC).

AQUATIC FATE: Based on a recommended classification scheme(1), an estimated Koc value of 1300(SRC), determined from a measured log Kow(2) and a recommended regression-derived equation(3), indicates that 4-hydroxybiphenyl may adsorb to suspended solids and sediment(SRC) in the water column. Based on limited data, 4-hydroxybiphenyl may be resistant to biodegradation under aerobic conditions(SRC). 4-Hydroxybiphenyl at 30 mg/l was inoculated with activated sludge; over 4 weeks, 0% of the theoretical BOD was obtained(4). A pure Pseudomonas culture, however, was able to utilize 4-hydroxybiphenyl as a sole carbon source(5). 4-Hydroxybiphenyl is not expected to volatilize from water surfaces based on an estimated Henry's Law constant of 5.2X10-8 atm-cu m/mole(SRC), developed using a fragment constant estimation method(6). BCF values of 30-57, measured in orange-red killifish(4), suggest that 4-hydroxybiphenyl will bioconcentrate in aquatic organisms(SRC).

ATMOSPHERIC FATE: According to a suggested classification scheme(1), an estimated vapor pressure of 1.8X10-5 mm Hg at 25 °C(2,SRC) indicates that 4-hydroxybiphenyl will exist in both the vapor and particulate phases in the ambient atmosphere. Vapor-phase 4-hydroxybiphenyl is degraded in the atmosphere by reaction with photochemically produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be about 6 hours(3,SRC). Particulate-phase 4-hydroxybiphenyl may be physically removed from the air by wet and dry deposition(SRC).

Adverse EffectsNeurotoxin - Other CNS neurotoxin
Effluent Concentrations4-Hydroxybiphenyl was measured in a standard reference diesel particulate sample (NBS 1650) at unreported concentrations(1).
Soil Adsorption/Mobility · 1 item

The Koc of 4-hydroxybiphenyl is estimated as approximately 1300(SRC), using a measured log Kow of 3.20(1) and a regression-derived equation(2,SRC). According to a recommended classification scheme(3), this estimated Koc value suggests that 4-hydroxybiphenyl has low mobility in soil(SRC).

Natural Pollution Sources4-Hydroxybiphenyl is formed as a reaction product from the photolysis of 4-chlorobiphenol in water(1).
Human Toxicity ExcerptsMODERATELY TOXIC BY INGESTION.
Artificial Pollution Sources4-Hydroxybiphenyl's production and use in the manufacture of dyes and resins, rubber chemicals, fungicide(1) and nonionogenic emulsifiers(2) may result in its release to the environment through various waste streams(SRC).
Environmental Biodegradation · 1 item

4-Hydroxybiphenyl at 30 mg/L was inoculated with activated sludge; over 4 weeks, 0% of the theoretical BOD was obtained(1), indicating that this compound is resistant to biodegradation in this system(SRC). A Pseudomonas strain, isolated by enrichment culture from activated sludge, was able to utilize 4-hydroxybiphewnyl as the sole carbon source(2) while a pure Alcaligenes culture, isolated from soil, was not(4).

Carcinogen ClassificationNo indication of carcinogenicity to humans (not listed by IARC).
Environmental Bioconcentration · 1 item

Measured BCF values of 30-48 and 39-57 were determined in orange-red killifish following a 48 hour exposure period to 2 and 20 ug/L 4-hydroxybiphenyl, respectively(1). According to a recommended classification scheme(2), these BCF values suggest that bioconcentration in aquatic organisms is moderate, not high(SRC).

Volatilization from Water/Soil · 1 item

The Henry's Law constant for 4-hydroxybiphenyl is estimated as 5.2X10-8 atm-cu m/mole(SRC) using a fragment constant estimation method(1). This value indicates that 4-hydroxybiphenyl will be essentially nonvolatile from water surfaces(2,SRC). 4-Hydroxybiphenyl's values for vapor pressure(3) and Henry's Law constant(1,SRC) indicate that volatilization from dry and moist soil surfaces is not likely to be a major fate process for this compound(SRC).

Non-Human Toxicity Excerpts · 5 items

IN RATS, 2-HYDROXYBIPHENYL HAD A GREATER INDUCING EFFECT ON THE ACTIVITY OF ANILINE HYDROXYLASE & AMINOPYRINE N-DEMETHYLASE THAN DID 4-HYDROXYBIPHENYL.

4-HYDROXYBIPHENYL & 2-HYDROXYBIPHENYL WERE TOXIC IN VITRO TO PTYCHODISCUS BREVIS, WITH THE 4-HYDROXY DERIVATIVE BEING SLIGHTLY MORE EFFECTIVE IN INDUCING LYSIS OF THE RED TIDE ORGANISM.

IN VITRO METAB OF P-NITROANISOLE, AMINOPYRINE & ANILINE BY RAT LIVER MICROSOMAL MONOXYGENASES WERE STUDIED, 4-OH-BIPHENYL CAUSED COMPETITIVE INHIBITION OF AMINOPYRINE DEMETHYLATION & ANILINE HYDROXYLATION BUT FAILED TO INHIBIT P-NITROANISOLE METAB BY NORMAL MICROSOMES.

MUTAGENICITY OF DIPHENYL & ITS 15 DERIV WAS EXAM BY MEANS OF DNA REPAIR TEST WITH E COLI WP2, WP2 UVRA, CM571 & WP100 & REVERSION TEST WITH S TYPHIMURIUM TA98 & TA100. P-PHENYL-PHENOL WAS NONMUTAGENIC.

For more Non-Human Toxicity Excerpts (Complete) data for 4-HYDROXYBIPHENYL (6 total), please visit the HSDB record page.

Regulatory information

TSCA Requirements · 1 item

Pursuant to section 8(d) of TSCA, EPA promulgated a model Health and Safety Data Reporting Rule. The section 8(d) model rule requires manufacturers, importers, and processors of listed chemical substances and mixtures to submit to EPA copies and lists of unpublished health and safety studies. (1,1'-Biphenyl)-4-ol is included on this list.

Safety data

PPE
dust mask type N95 (US), Eyeshields, Gloves
wgk
2
tsca
TSCA listed
rtecs
DV5850000
ridadr
UN3077
hs_code
29071900
Toxicity
LD50 ipr-mus: 150 mg/kg NTIS** AD691-490
risk_code
36/37/38-51/53-38
Signal word
Warning
Symbol(GHS)
GHS07,GHS09
hazard_code
Xi,N
safety_code
26-36/37-61-36
hazard_class
9
Storage Class
13 - Non Combustible Solids
packing_group
III
Hazard statements
H315-H317-H411
Limited Quantities
5.0 L (1.3 gallons) (liquid) or 5.0 kg (11 lbs) (solid)
Excepted Quantities
Max Inner Pack (30g or 30ml) and Max Outer Pack (1Kg or 1L)
REACH Registrations
Active
Hazard Classifications
Aquatic Chronic 2Skin Irrit. 2Skin Sens. 1B
Precautionary statements
P261-P264-P272-P273-P280-P302+P352
Hazardous Substances Data
92-69-3(Hazardous Substances Data)

INTERMEDIATE FOR DYES AND RESINS; RUBBER CHEMICALS; LABORATORY REAGENT; FUNGICIDE

Derivatives: bitertanol; phenolic resins, oil-soluble, non oil-reactive; phenolic resins, oil-soluble, oil-reactive

4-Hydroxybiphenyl is an intermediate for the production of varnish resins and nonionogenic emulsifiers which are used in the plant protection, polyurethane, and dyeing sectors.

U.S. Production2023: 75,000 - <500,000 lb
Industry UsesOther
Methods of Manufacturing · 5 items

FROM REACTION OF CHLOROBENZENE & CAUSTIC SODA SOLN @ ELEVATED TEMP & PRESSURE.

Biphenyl (sulphonation/alkali fusion; coproduced with o-phenylphenol)

Chlorobenzene (arylation/base-catalysed hydrolysis; coproduced with o-phenylphenol)

The alkaline fusion of arenesulfonic acid salts to yield phenols is used for the commercial manufacture of a variety of phenolic compounds including...4-hydroxybiphenyl...

4-Hydroxybiphenyl is formed alongside 2-hydroxybiphenyl as a byproduct in the alkaline pressure hydrolysis of chlorobenzene to phenol in 5-6% yield. The mixture consists of 2/3 ortho and 1/3 para isomer which can be separated by fractional distillation. 4-Hydroxybiphenyl can also be produced by sulfonation of biphenyl and alkaline fusion of the para-biphenylsulfonic acid.

General Manufacturing Information · 2 items

Transportation Equipment Manufacturing

[1,1'-Biphenyl]-4-ol: ACTIVE

Applications · 4 items

UsesBiphenol, also known as p-phenyl phenol, is the intermediates of the fungicide bitertanol.It is used in the synthesis of oil-soluble resin and emulsifier; used as a component of corrosion-resistant paint, printing and dyeing carrier. P-hydroxybiphenyl synthesized red light enhancement and green light enhancement materials are one of the main raw materials for color films and are also used as analytical reagents.

Uses4-Phenylphenol is an intermediate for the production of varnish resins and nonionogenic emulsifiers which are used in the plant protection,polyurethane, and dyeing sectors.

UsesFluorescence and phosphorescence quantum yields and fluorescence and phosphorescence lifetimes were obtained for 4-phenylphenol adsorbed on filter paper with either NaCl, NaBr, or NaI at 296 and 93 K. The solid-surface fluorescence and phosphorescence quantum yield values and phosphorescence lifetime values were obtained for p-aminobenzoic acid (PABA) and 4-phenylphenol adsorbed on α-cyclodextrin/NaCl mixtures. 4-Phenylphenol is used as an antioxidant and is a potential EDC.

General Description4-Phenylphenol undergoes enzymatic polymerization and polymer developed is characterized by matrix-assisted laser desorption ionization time-of-flight mass spectrometry. It is the intermediate in manufacture of 4-alkyl substituted phenol-formaldehyde resins.

Preparation methods · 1 item

Preparation4-phenylphenol synthesis: Add to a 50 ml round-bottom flask, in this order, 122 mg of phenylboronic acid, 414 mg of potassium carbonate, 220 mg of 4-iodophenol, and 10 ml of deionized water. Weigh in a suitably sized container 3 mg Pd on C 10%, add 1 ml of deionized water, and stir gently by hand to form a slurry that is then transferred to the reaction flask. Couple the flask to a water-jacketed condenser, and reflux the mixture on a hot plate with a magnetic stirrer vigorously for 30 min (until a precipitate appears). After this time, switch off the plate and allow to cool to r.t. Add HCl 2 M to an acidic pH (check with indicator paper). Separate the resulting solid, still containing the catalyst, by filtering with a Hirsch funnel. Wash the solid with 10 ml of water. Then, in a Hirsch funnel, add 10 ml of MeOH, and collect the filtrate in a clean container. Add to the resulting MeOH solution 10 ml of deionized water to obtain the precipitate of the product. Purify by recrystallization, heating in a water bath container with the precipitate and the MeOH/H2O mixture. If necessary, add 1 to 2 ml more of hot MeOH, to finish dissolving the solid. Filter under vacuum with a Hirsch funnel, air dry the solid (can recover the next day). Weigh and calculate the yield.

Upstream & downstream products

Upstream raw materials

2-PhenylphenolBiphenylTrichloroethyleneSulfur trioxideMixed phenyl phenolSodium 2-biphenylate4-Isopropylbiphenyl4,4'-Biphenol[1,1'-Biphenyl]-2-ol, 3-nitro-

Downstream products

2-PhenylphenolBIFENAZATE3,5-Dinitro-biphenyl-4-ol4-Hydroxy-3-nitrobiphenyl5-Phenyl-o-anisidine3-Bromo-4-hydroxydiphenylsodium 2-[4-[(4-hydroxybiphenyl-3-yl)azo]phenoxy]ethyl sulphate

Additional notes

DefinitionChEBI: 4-Phenylphenol is a member of the class of hydroxybiphenyls that is biphenyl carrying a hydroxy group at position 4.