HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Compound

Trichloro-2-propen-1-ylsilane

HCID 7867
New reaction
Print
Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
107-37-9
Standard SMILES
C=CC[Si](Cl)(Cl)Cl
InChIKey
HKFSBKQQYCMCKO-UHFFFAOYSA-N
Molecular formula
C3H5Cl3Si
Average molar mass
175.51 g/mol
Monoisotopic mass
173.92261

Overview

Allyltrichlorosilane, stabilized appears as a colorless liquid with a pungent odor. Flash point of 95 °F. Corrosive to metals and tissue.

Names & identifiers

Preferred name
Trichloro-2-propen-1-ylsilane
IUPAC
trichloro(prop-2-enyl)silane
English name
Allyltrichlorosilane
Molecular formula
C3H5Cl3Si
Molecular weight
175.52

Names & synonyms

ALLYLTRICHLOROSILANE107-37-9Silane, allyltrichloro-Silane, trichloroallyl-Propen-3-yltrichlorosilaneAllylsilicone trichlorideSilane, trichloro-2-propen-1-yl-UB3N98803NNSC-20940DTXSID3059347RefChem:899203Trichloro-2-propen-1-ylsilane
Show more names
DK034NSC 20940allylsiliconeallyltrichloro-silanTRICHLOROALLYLSILANEtrichloroallyl-silan3-TRICHLOROSILYLPROPENE
DTXCID6033039203-485-9Silane, trichloro-2-propenyl-Allyl trichlorosilanetrichloro(prop-2-enyl)silaneMFCD00000486ALLYL TRICHLORO SILANEallytrichlorosilane

Database identifiers

CAS
107-37-9
PubChem CID
7867
DTXSID
DTXSID3059347
UNII
UB3N98803N
EC Number
203-485-9
Nikkaji
J54.318G

Properties

Computed structural properties

Topological polar surface area
0 Ų
Hydrogen bond donors
0
Hydrogen bond acceptors
0
Rotatable bonds
1
Heavy atoms
7
Formal charge
0
Complexity
65.1

Experimental & physicochemical properties

Chemical Classes · 2 items

Toxic Gases & Vapors -> Chlorosilanes

Corrosives

SpringerMaterials Properties29Si nuclear magnetic resonance spectrum
OdorPungent, irritating odor
Density · 4 items

1.215 at 68 °F (USCG, 1999) - Denser than water; will sink

1.2011 g/cu cm at 20 °C

Density: 1.217 at 27 °C

1.348 @25 °C

Color/FormColorless liquid
Corrosivity · 2 items

Corrosive

Corrodes metals because of hydrochloric acid formed

Flash Point · 3 items

95 °F (USCG, 1999)

35 °C

95 °F (35 °C) (open cup)

Boiling Point · 3 items

241 °F at 760 mmHg (USCG, 1999)

117.5 °C

117.5 °C @760 [mm Hg]

Decomposition · 3 items

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 4 items

Danger

H225 (97.7%): Highly Flammable liquid and vapor [Danger Flammable liquids]

P210, P233, P240, P241, P242, P243, P260, P264, P280, P301+P330+P331, P302+P361+P354, P303+P361+P353, P304+P340, P305+P354+P338, P316, P321, P363, P370+P378, P403+P235, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 44 reports by companies from 4 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Hazard information

Hazards IdentificationWater-reactive material (WR)
Regulatory Information · 2 items

Chemical: Silane, trichloro-2-propenyl-

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

DOT LabelCorrosive Flammable Liquid
Fire Hazards · 2 items

Special Hazards of Combustion Products: Irritating vapors of hydrogen chloride and phosgene may form.

· HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

Fire Potential · 3 items

Fire hazard.

Self-ignites in air. With a little ammonia, it forms a self-igniting product. /Chlorosilanes/

Certain strong corrosives may, on contact with organic matter or other chemicals, cause fire ... /Corrosive substances/

Health Hazards · 2 items

Inhalation of vapor irritates mucous membranes. Liquid causes severe burns of eyes and skin and severe internal burns if ingested. (USCG, 1999)

Chemistry & industry

Pharmacology

Metabolism/Metabolites... Chlorosilanes will be rapidly hydrolyzed upon contact with tissue fluids to release hydrochloric acid. /Chlorosilanes/

Uses & manufacturing

Uses · 3 items

Used as an intermediate for silicones and in finishes for glass fibers; [Hawley]

Toxic Gas from Spilling Chemical in Water [Category: Other]

Intermediate for silicones; fibrous glass finishes

U.S. ProductionProduction volumes for non-confidential chemicals reported under the Inventory Update Rule. [Table#4155]
Methods of ManufacturingReaction of allyl chloride with silicon (copper catalyst).
Formulations/PreparationsGrades or Purity: Commercial
General Manufacturing InformationSilane, trichloro-2-propen-1-yl-: ACTIVE
Applications · 3 items

UsesAllyltrichlorosilane acts as a reagent that produces homoallylic alcohols upon reaction with aldehydes in DMF. It is used to make silicones and glass fiber fininshes.

UsesIntermediate for silicones, fiberous glass finishes.

General DescriptionA colorless liquid with a pungent odor. Flash point of 95°F. Corrosive to metals and tissue.

Preparation methods · 1 item

allyl trichlorosilane is conveniently prepared from allyl chloride, Cl3SiH, CuCl, and (i-Pr)2EtN (or Et3N) in ether at 20°C,or from allyl chloride and coppersilicon powder at 250°C.Other methods include the reaction of allyl chloride with SiCl4 in the presence of CuCl and Et3N7 or in the presence of Cp2Ni and HMPA at 90°C,the flash pyrolysis of allyl chloride with Si2Cl2 in PhCl at 500°C,the reaction of allylMgBr with SiCl4,coupling of allene with Cl3SiH, catalyzed by (Ph3P)4Pd (120°C, 5 h),11 and the elimination of HCl from Cl(CH2)3SiCl3 using, e.g., quinoline as base.The analogous (E)-crotyl trichlorosilane can be synthesized from (E)-crotyl chloride, Cl3SiH, CuCl, and (i-Pr)2EtN in ether at 20°C,or from (E)-crotyl chloride, SiCl4, and Cp2Ni in HMPA at 90°C.The reaction of (E)-crotyl chloride with Cl3SiH and Bu4PCl at 150°C has also been reported. (Z)-crotyl trichlorosilane, on the other hand, was prepared via the 1,4-addition of Cl3SiH to butadiene, catalyzed by (Ph4P)4Pd (at 20°Cor78°C)or by (PhCN)2PdCl2;this hydrosilylation can also be catalyzed by Nior proceed uncatalyzed at 500–600°C.Analogous trifluoro and tribromo derivatives C3H5SiX3 (X = F and Br) have also been described.

Related reactions

14 records
New reaction record
HRID 259880 reaction equation
HRID 259880As reactant
HRID 335677 reaction equation
HRID 335677As reactant
HRID 493451 reaction equation
HRID 493451As reactant
HRID 493458 reaction equation
HRID 493458As reactant
HRID 493460 reaction equation
HRID 493460As reactant
HRID 658568 reaction equation
HRID 658568As reactant
HRID 685611 reaction equation
HRID 685611As reactant
HRID 827502 reaction equation
HRID 827502As reactant
PreviousPage 1 of 2

Compound notes

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes

The silanes decomp at elevated temp to liberate hydrogen and deposit a high purity silicon, which leads to some of the principal uses of silanes. /Silanes/

Hydrogen chloride and phosgene gases may form; both are toxic and irritating.

When heated to decomposition it emits toxic /chlorine/.

Melting Point · 2 items

35 °C

-85 °C

Vapor Density6.05 (Air = 1)
PolymerizationPolymerizes easily.

Physicochemical properties

Melting point
35 °C · 35 °C (95 °F; 308 K)
Boiling point
117.5 °C · 117.5 °C (243.5 °F; 390.6 K)
Density
1.2011 g/cm3 · 1.2011 g/cm3
vapor density
1 · >1 (vs air)
vapor pressure
10 mm · 10 mm Hg ( 16.1 °C)
refractive index
20 · n 20/D 1.443 (lit.)
Flash point
35 °C · 35°C
storage temp.
Flammables area
solubility
2 Cl2, · soluble in MeCN, THF, CH2Cl2, toluene, benzene, etc.; not compatible with protic solvents, acetone, and other ketones. Dipolar aprotic solvents (DMF, DMSO, HMPA, etc.) coordinate Si, thereby increasing the reactivity of C3H5SiCl3 with electrophiles.
form
solid
color
white
Specific Gravity
1.211 · 1.211
Water Solubility
Soluble in THF, toluene, benzene. Reacts with water.
Hydrolytic Sensitivity
8 · 8: reacts rapidly with moisture, water, protic solvents
Sensitive
Moisture Sensitive
BRN
1743449 · 1743449
InChI
1S/C3H5Cl3Si/c1-2-3-7(4,5)6/h2H,1,3H2
InChIKey
HKFSBKQQYCMCKO-UHFFFAOYSA-N
SMILES
Cl[Si](Cl)(Cl)CC=C
CAS DataBase Reference
107 · 107-37-9(CAS DataBase Reference)
EWG's Food Scores
1 · 1
FDA UNII
3 N98803N · UB3N98803N
EPA Substance Registry System
-2 · Silane, trichloro-2-propen-1-yl- (107-37-9)
UNSPSC Code
12352002 · 12352002
NACRES
22 · NA.22
Symbol(GHS)
2 · GHS02,GHS05
Signal word
Danger
Hazard statements
225 · H225-H314
Precautionary statements
210 · P210-P233-P240-P241-P242-P243-P280-P260-P264-P303+P361+P353-P370+P378-P301+P330+P331-P363-P304+P340-P310-P305+P351+P338-P403+P235-P405-P501
PPE
Faceshields, Gloves, Goggles, type ABEK (EN14387) respirator filter
Hazard Codes
F,C
Risk Statements
11 · 11-34
Safety Statements
16 · 16-26-33-36/37/39-43-45
RIDADR
1724 · UN 1724
WGK Germany
1 · 1
RTECS
1530000 · VV1530000
F
10 · 10-21
TSCA
TSCA listed
HazardClass
8 · 8
PackingGroup
II
HS Code
2931900090 · 2931900090
Storage Class
3 · 3 - Flammable liquids
Hazard Classifications
2 Skin · Flam. Liq. 2Skin Corr. 1B
Hazardous Substances Data
107 · 107-37-9(Hazardous Substances Data)

· TOXIC and/or CORROSIVE; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death.

Hazards Summary · 1 item

A corrosive substance; An eye, nose, and throat irritant; [HSDB] May cause severe burns to eyes and skin; [CAMEO] Water reactive--produces HCl when spilled in water; [ERG 2016] Evolves heat and corrosive products in contact with moisture; A corrosive substance that can cause injury to the skin, eyes, and respiratory tract; Inhalation may cause pulmonary edema; [MSDSonline]

DOT ID and Guide1724 155
Reactive GroupHydrocarbons, Aliphatic Unsaturated
RCRA RequirementsD003; A solid waste containing allyltrichlorosilane may become characterized as a hazardous waste when subjected to testing for reactivity as stipulated in 40 CFR 261.23, and if so characterized, must be managed as a hazardous waste.
Reactivity AlertsHighly Flammable
Reactivity Profile · 1 item

Chlorosilanes, such as ALLYLTRICHLOROSILANE, are compounds in which silicon is bonded to from one to four chlorine atoms with other bonds to hydrogen and/or alkyl groups. Chlorosilanes react with water, moist air, or steam to produce heat and toxic, corrosive fumes of hydrogen chloride. They may also produce flammable gaseous H2. They can serve as chlorination agents. Chlorosilanes react vigorously with both organic and inorganic acids and with bases to generate toxic or flammable gases.

Safety & protection

Fire FightingExcerpt from ERG Guide 155 [Substances - Toxic and/or Corrosive (Flammable / Water-Sensitive)]:
Accidental Release Measures · 2 items

· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.

· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.

First Aid · 2 items

Get medical attention after all exposures to this compound.

General First Aid:

Firefighting HazardsDifficult to extinguish. Re-ignition may occur.
Exposure Control and Personal Protection · 2 items

· Wear positive pressure self-contained breathing apparatus (SCBA).

TIH (Toxic Inhalation Hazard) - Term used to describe gases and volatile liquids that are toxic when inhaled. Some are TIH materials themselves, e.g., chlorine, and some release TIH gases when spilled in water, e.g., chlorosilanes. [ERG 2016].

Fire Fighting Procedures · 3 items

DO NOT use water. Use dry chemical, CO2, or foam extinguishers. Low or medium expansion AFFF foam or dry chemical if available in sufficient amounts (FEMA). Vapors are heavier than air and will collect in low areas. Vapors may travel long distances to ignition sources and flashback. Vapors in confined areas may explode when exposed to fire. If material or contaminated runoff enters waterways, notify downstream users of potentially contaminated waters. Notify local health and fire officials and pollution control agencies. From a secure, explosion-proof location, use water spray to cool exposed containers. If cooling streams are ineffective (venting sound increases in volume and pitch, tank discolors or shows any signs of deforming), withdraw immediately to a secure position.

Wear positive pressure self-contained breathing apparatus ... Wear appropriate chemical protective gloves, goots, and goggles. /Allyltrichlorosilane, stabilized/

Water may be ineffective.

Storage Conditions · 3 items

SRP: Operations involving entry into tanks or closed vessels, and emergency situations, require consideration of potentially oxygen deficient, or "immediately dangerous to life and health" IDLH environments. This may necessitate use of a self-contained breathing apparatus (SCBA), or a positive pressure supplied air respirator.

Before entering confined space in which allyltrichlorosilane may be present, check to make sure that an explosive concentration does not exist. Store in tightly closed containers in a cool, well-ventilated area away from water and sources of ignition. Use and store allyltrichlorosilane under nitrogen. Metal containers involving the transfer of this chemical should be grounded and bonded. Where possible, automatically pump liquid from drums or other storage containers to process containers. Drums must be equipped with self-closing valves, pressure vacuum bungs, and flame arresters. Use only nonsparking tools and equipment, especially when opening and closing containers of this chemical. Sources of ignition, such as smoking and open flame, are prohibited where where this chemical is used, handled, or stored in a manner that could create a potential fire or explosion hazard. Where this chemical is used, handled, manufactured, or stored, use explosion-proof electrical equipment and fittings.

All containers, pipes, apparatus, installations, and structures used for manufacture, storage, transport, or use of these substances must be of material resistant to corrosive substances or be protected by suitable coatings ... All containers or receptacles should be clearly labelled to indicate their contents and should bear the danger symbol for corrosives. /Corrosive substances/

Cleanup Methods · 5 items

SRP: Wastewater from contaminant suppression, cleaning of protective clothing/equipment, or contaminated sites should be contained and evaluated for subject chemical or decomposition product concentrations. Concentrations shall be lower than applicable environmental discharge or disposal criteria. Alternatively, pretreatment and/or discharge to a permitted wastewater treatment facility is acceptable only after review by the governing authority and assurance that "pass through" violations will not occur. Due consideration shall be given to remediation worker exposure (inhalation, dermal and ingestion) as well as fate during treatment, transfer and disposal. If it is not practicable to manage the chemical in this fashion, it must be evaluated in accordance with EPA 40 CFR Part 261, specifically Subpart B, in order to determine the appropriate local, state and federal requirements for disposal.

Evacuate and restrict persons not wearing protective equipment from area of spill or leak until clean-up is complete. Remove all igntion sources. Establish forced ventilation to keep levels below explosive limit. Use foam spray to reduce vapors. Cover with dry lime, dry sand, soda ash, or a similar material and deposit in sealed containers. Collect powdered material in the most convenient and safe manner and deposit in sealed containers. Keep allyltrichlorosilane out of a confined space, such as a sewer, because of the possibility of an explosion, unless the sewer is designed to prevent the build-up of explosive concentrations. It may be necessary to contain and dispose of dodecyl trichlorosilane as a hazardous waste. If material or contaminated runoff enters waterways, notify downstream users of potentially contaminated waters.

Environmental considerations - land spill: dig a pit, pond, lagoon, holding area to contain liquid or solid material /SRP: If time permits, pits, ponds, lagoons, soak holes, or holding areas should be sealed with an impermeable flexible membrane liner/; dike surface flow using soil, sand bags, foamed polyurethane, or foamed concrete; absorb bulk liquid with fly ash, cement powder, or commercial sorbents. /Allyltrichlorosilane, stabilized/

Environmental considerations - water spill: use natural barriers or oil spill control booms to limit spill travel; remove trapped material with suction hoses. /Allyltrichlorosilane, stabilized/

Environmental considerations - air spill: apply water spray or mist to knock down vapors. /Allyltrichlorosilane, stabilized/

Nonfire Spill ResponseExcerpt from ERG Guide 155 [Substances - Toxic and/or Corrosive (Flammable / Water-Sensitive)]:
Disposal Methods · 1 item

SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational harm/injury/toxicity or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal and plant life; and conformance with environmental and public health regulations.

Preventive Measures · 5 items

SRP: The scientific literature for the use of contact lenses by industrial workers is inconsistent. The benefits or detrimental effects of wearing contact lenses depend not only upon the substance, but also on factors including the form of the substance, characteristics and duration of the exposure, the uses of other eye protection equipment, and the hygiene of the lenses. However, there may be individual substances whose irritating or corrosive properties are such that the wearing of contact lenses would be harmful to the eye. In those specific cases, contact lenses should not be worn. In any event, the usual eye protection equipment should be worn even when contact lenses are in place.

SRP: Contaminated protective clothing should be segregated in a manner that results in no direct personal contact by personnel who handle, dispose of, or clean the clothing. Quality assurance procedures to confirm the efficacy of the cleaning procedures should be implemented prior to the decontaminated protective clothing being returned for reuse by the workers. Contaminated clothing (including shoes/socks) should not be taken home at end of shift, but should remain at employee's place of work for cleaning.

SRP: Local exhaust ventilation should be applied wherever there is an incidence of point source emissions or dispersion of regulated contaminants in the work area. Ventilation control of the contaminant as close to its point of generation is both the most economical and safest method to minimize personnel exposure to airborne contaminants. Ensure that the local ventilation moves the contaminant away from the worker.

Contact lenses should not be worn when working with this chemical.

For more Preventive Measures (Complete) data for Allyltrichlorosilane (8 total), please visit the HSDB record page.

Isolation and Evacuation · 4 items

Excerpt from ERG Guide 155 [Substances - Toxic and/or Corrosive (Flammable / Water-Sensitive)]:

Immediate precautionary measure

When spilled in water

When spilled in water

Toxicology

Adverse EffectsDermatotoxin - Skin burns.
Human Toxicity Excerpts · 5 items

/SIGNS AND SYMPTOMS/ Acute inhalation exposure may result in sneezing, choking, laryngitis, dyspnea (shortness of breath), respiratory tract irritation, and chest pain. Higher exposure can cause pulmonary edema, a medical emergency that can be delayed for several hours. This can cause death. Bleeding of nose and gums, ulceration of the nasal and oral mucosa, pulmonary edema, chronic bronchitis, and pneumonia may also occur. If the eyes have come in contact with dimethyldichlorosilane, irritation, pain, swelling, corneal erosion, and blindness may result. Dermatitis (red, inflamed skin), severe burns, pain, and shock generally follow dermal exposure. Inhalation irritates mucous membranes. Severe gastrointestinal damage may occur. Vapors cause severe eye and lung injury. Upon short contact, second and third degree burns may occur. Signs and symptoms of acute ingestion of dimethyldichlorosilane may be severe and include increased salivation, intense thirst, difficulty swallowing, chills, pain, and shock. Oral, esophageal, and stomach burns are common. /Dimethyldichlorosilane/

/SIGNS AND SYMPTOMS/ Inhalation irritates mucous membranes. Contact with liq causes severe burns of eyes and skin ... Vapors cause severe irritation of eyes and throat and can cause eye and lung injury. They cannot be tolerated even at low concn. Causes second- and third-degree burns on short contact ...

/SIGNS AND SYMPTOMS/ Causes severe eye and skin burns. Serious health hazard. May be harmful if inhaled. Irritating to eye, skin, and respiratory system. /Dimethylchlorosilane/

/SIGNS AND SYMPTOMS/ Short Term Exposure: allyltrichlorosilane is corrosive and contact can cause severe eye and skin burns. Exposure can irritate the eyes, nose, and respiratory tract. Higher levels can irritate the lungs causing coughing and shortness of breath; still higher exposures can cause pulmonary edema, a medical emergency. This can cause death. Long Term Exposure: corrosives may cause long-term lung problems, although it is not known at this time that this chemical causes lung damage.

For more Human Toxicity Excerpts (Complete) data for Allyltrichlorosilane (6 total), please visit the HSDB record page.

Artificial Pollution SourcesIntermediate for silicones; fibrous glass finishes
Non-Human Toxicity Excerpts · 5 items

/LABORATORY ANIMALS: Acute Exposure /Via inhalation/ they have a corrosive action when brought into contact with mucous membranes. /Chlorosilanes/

/LABORATORY ANIMALS: Acute Exposure/ /When instilled/...into eye of rabbit all these compounds /methyl and ethyl chlorosilanes/, even at very low doses (0.05 mL), caused severe burns of cornea and eyelids ... /When applied/ to skin of rabbit the region attacked by chlorosilanes blanches and blisters appear; action is more marked the damper the surface of the skin. /Chlorosilanes/

/OTHER TOXICITY INFORMATION/ Hydrogen chloride AEGL values were adopted as AEGL values for monochlorosilanes, AEGL values for dichlorosilanes were derived by dividing the hydrogen chloride AEGL values by a molar adjustment factor of two, AEGL values for the title trichlorosilanes were derived by dividing the hydrogen chloride AEGL values by a molar adjustment factor of three, and AEGL values for tetrachlorosilane were derived by dividing the hydrogen chloride AEGL values by a molar adjustment factor of four.

/OTHER TOXICITY INFORMATION/ All these compounds, even in very low doses ... caused severe burns of cornea and eyelids ... /After/ application to the skin of the rabbit the region attacked by chlorosilanes blanches and then blisters appear ... /Chlorosilanes/

/OTHER TOXICITY INFORMATION/ Although chemical-specific data are not available for many of the ... chlorosilanes, acute inhalation data from rat studies are available for structurally-similar chlorosilanes (n-propyltrichlorosilane, methyltrichlorosilane, vinyltrichlorosilane, ethyltrichlorosilane, methylvinyldichlorosilane, methyldichlorosilane, dimethyldichlorosilane, dimethylchlorosilane, trimethylchlorosilane, and tetrachlorosilane). These data suggest that the acute toxicity of chlorosilanes is due to the hydrogen chloride hydrolysis product; acute toxicity of the chlorosilanes is both qualitatively (based on clinical signs) and quantitatively (based on molar equivalents of hydrogen chloride) similar to that of HCl. Complete hydrolysis of one mole of a monochlorosilane would yield a maximum of one mole of hydrogen chloride. Complete hydrolysis of a dichlorosilane would yield a maximum of two moles of hydrogen chloride, complete hydrolysis of a trichlorosilane would yield a maximum of three moles of hydrogen chloride, and complete hydrolysis of tetrachlorosilane would yield a maximum of four moles of hydrogen chloride. /Chorosilanes/

Environmental Abiotic Degradation · 1 item

Silane compounds decompose upon contact with water or steam to produce heat and toxic and corrosive fumes of hydrogen chloride. Silane ignites spontaneously in air(1,2). With a little ammonia, it forms a self-igniting product(1). /Chlorosilanes/

Environmental Fate/Exposure Summary · 1 item

Chlorosilane compounds' production and use as intermediates for silicone products may result in their release to the environment through various waste streams. However, these compounds decompose to release hydrogen chloride upon contact with water or steam. Therefore, volatilization, biodegradation, and bioconcentration are not expected to be important environmental fate processes. /Chlorosilanes/ (SRC)

Antidote and Emergency Treatment · 3 items

Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand-valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR as necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. /Silane, Chlorosilane, and Related Compounds/

Basic treatment: Establish a patent airway (oropharyngeal or nasopharyngeal airway, if needed). Suction if necessary. Watch for signs of respiratory insufficiency and assist ventilations if necessary. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Monitor for pulmonary edema and treat if necessary ... . Anticipate seizures and treat if necessary ... . Monitor for shock and treat if necessary ... . For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with 0.9% saline (NS) during transport ... . Do not use emetics. For ingestion, rinse mouth and administer 5 ml/kg up to 200 ml of water for dilution if the patient can swallow, has a strong gag reflex, and does not drool. Administer activated charcoal (refer to ingestion protocol in Section Three ... . Cover skin burns with sterile dressings after decontamination ... . /Silane, Chlorosilane, and Related Compounds/

Advanced treatment: Consider orotracheal or nasotracheal intubation for airway control in the patient who is unconscious, has severe pulmonary edema, or is in severe respiratory distress. Early intubation at the first sign of upper airway obstruction may be necessary. Positive-pressure ventilation techniques with a bag-valve-mask device may be beneficial. Consider drug therapy for pulmonary edema ... . Monitor cardiac rhythm and treat arrhythmias if necessary ... . Start IV administration of D5W /SRP: "To keep open", minimal flow rate/. Use 0.9% saline (NS) or lactated Ringer's (LR) if signs of hypovolemia are present. For hypotension with signs of hypovolemia, administer fluid cautiously. Consider vasopressors if patient is hypotensive with a normal fluid volume. Watch for signs of fluid overload ... . Treat seizures with diazepam or lorazepam ... . Use proparacaine hydrochloride to assist eye irrigation ... . /Silane, Chlorosilane, and related compounds/

Non-Human Toxicity ValuesLD50 Mouse iv 56 mg/kg

Regulatory information

RCRA RequirementsD003; A solid waste containing allyltrichlorosilane may become characterized as a hazardous waste when subjected to testing for reactivity as stipulated in 40 CFR 261.23, and if so characterized, must be managed as a hazardous waste.
DHS Chemicals of Interest (COI) · 4 items

Allyltrichlorosilane, stabilized

A Commercial Grade

A Placarded Amount

Chemical or material that can be mixed with readily available materials.

Safety data

F
10-21
PPE
Faceshields, Gloves, Goggles, type ABEK (EN14387) respirator filter
wgk
1
tsca
TSCA listed
rtecs
VV1530000
ridadr
UN 1724
hs_code
2931900090
risk_code
11-34
Signal word
Danger
Symbol(GHS)
GHS02,GHS05
hazard_code
F,C
safety_code
16-26-33-36/37/39-43-45
hazard_class
8
Storage Class
3 - Flammable liquids
packing_group
II
Hazard statements
H225-H314
Hazard Classifications
Flam. Liq. 2Skin Corr. 1B
Precautionary statements
P210-P233-P240-P241-P242-P243-P280-P260-P264-P303+P361+P353-P370+P378-P301+P330+P331-P363-P304+P340-P310-P305+P351+P338-P403+P235-P405-P501
Hazardous Substances Data
107-37-9(Hazardous Substances Data)
Preparation

Upstream & downstream products

Downstream products

Dichlorosilylene3-Chloropropyltrichlorosilane1-Methyl-2-phenethyltrichlorosilaneAllyltrimethoxysilane