HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Compound

Trichloropentylsilane

HCID 7885
New reaction
Print
Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
107-72-2
Standard SMILES
CCCCC[Si](Cl)(Cl)Cl
InChIKey
KWDQAHIRKOXFAV-UHFFFAOYSA-N
Molecular formula
C5H11Cl3Si
Average molar mass
205.6 g/mol
Monoisotopic mass
203.96956

Overview

Amyltrichlorosilane appears as a colorless to yellow liquid with a pungent odor. It is combustible and has a flash point of 145 °F. Corrosive to metals and tissue.

Names & identifiers

Preferred name
Trichloropentylsilane
IUPAC
trichloro(pentyl)silane
English name
Amyltrichlorosilane (mixed isomers)(Pentyltrichlorosilane)
Molecular formula
C5H11Cl3Si
Molecular weight
205.59

Names & synonyms

PentyltrichlorosilaneAmyltrichlorosilane107-72-2TRICHLOROPENTYLSILANEHSDB 887EINECS 203-515-0UNII-N9GP7288ZPBRN 17379474-04-00-04249 (Beilstein Handbook Reference)TRICHLOROPENTYLSILANE [HSDB]CA0900UN 1728
Show more names
TRICHLOROAMYLSILANEtrichloropentyl-silann-Amyltrichlorosilanepentyltrichloro-silanTRICHLOROPENTYLSILICANEn-Pentyltrichlorosilane
UN1-728AmiltriclorosilanoSilane, trichloropentylRefChem:191018AMYL TRICHOROSILANEAmiltriclorosilano (Spanish)KWDQAHIRKOXFAV-UHFFFAOYSA-Ntrichloro(pentyl)silane

Database identifiers

CAS
107-72-2
PubChem CID
7885
DTXSID
DTXSID70861726
UNII
N9GP7288ZP
EC Number
203-515-0
Nikkaji
J153.545E

Properties

Computed structural properties

Topological polar surface area
0 Ų
Hydrogen bond donors
0
Hydrogen bond acceptors
0
Rotatable bonds
3
Heavy atoms
9
Formal charge
0
Complexity
69.1

Experimental & physicochemical properties

Chemical Classes · 2 items

Toxic Gases & Vapors -> Chlorosilanes

Corrosives

SpringerMaterials PropertiesNuclear quadrupole resonance spectroscopy
OdorSHARP, LIKE HYDROCHLORIC ACID; PUNGENT
Density · 3 items

1.137 at 77 °F (USCG, 1999) - Denser than water; will sink

1.1330 g/cu cm at 20 °C

1.1330 @ 20°C

Color/FormCOLORLESS TO YELLOW LIQUID
CorrosivityCorrodes metals
Flash Point · 2 items

145 °F (USCG, 1999)

145 °F (63 °C) OC

Boiling Point · 3 items

320 °F at 760 mmHg (USCG, 1999)

172 °C; 60.5 °C at 15 mm Hg

172 °C @760 [mm Hg]

Decomposition · 3 items

Hydrogen chloride and phosgene gases may form; both are toxic and irritating.

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 4 items

Danger

H226 (95.1%): Flammable liquid and vapor [Warning Flammable liquids]

P210, P233, P240, P241, P242, P243, P260, P261, P262, P264, P270, P271, P280, P301+P330+P331, P302+P352, P302+P361+P354, P303+P361+P353, P304+P340, P305+P354+P338, P316, P321, P361+P364, P363, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 41 reports by companies from 3 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Hazard information

Hazards IdentificationWater-reactive material (WR)
Regulatory Information · 2 items

Chemical: Silane, trichloropentyl-

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

DOT LabelCorrosive
Fire Hazards · 2 items

Special Hazards of Combustion Products: Irritating hydrogen chloride and toxic phosgene may be formed.

· Combustible material: may burn but does not ignite readily.

Fire Potential · 2 items

Certain strong corrosives may, on contact with organic matter or other chemicals, cause fire ... /Corrosive substances/

Self-ignites in air. With a little ammonia, it forms a self-igniting product. /Chlorosilanes/

Health Hazards · 2 items

Inhalation causes irritation of mucous membrane. Contact of liquid with eyes or skin causes severe burns, and ingestion causes severe burns of mouth and stomach. (USCG, 1999)

Chemistry & industry

Pharmacology

Metabolism/Metabolites... Chlorosilanes will be rapidly hydrolyzed upon contact with tissue fluids to release hydrochloric acid. /Chlorosilanes/

Uses & manufacturing

Uses · 3 items

Used as intermediate for silicones; [HSDB]

Toxic Gas from Spilling Chemical in Water [Category: Other]

Intermediate for silicones

U.S. ProductionProduction volumes for non-confidential chemicals reported under the Inventory Update Rule. [Table#2345]
Methods of ManufacturingBy Grignard reaction of silicon tetrachloride and amylmagnesium chloride.
General Manufacturing InformationSilane, trichloropentyl-: ACTIVE
Applications · 3 items

DescriptionAmyl trichlorosilane is a colorless to yellowish liquid with a sharp acrid odor (like hydrochloric acid).Molecular weight= 205.63; Boiling point= 168℃;Specific gravity= 1.137 at 25℃; Liquid surface tension= 5(estimate) 0.020 N/m at 20℃; Relative vapor density(air= 1) 5 7.1; Latent heat of vaporization= 2.02 3 105J/kg; Heat of combustion 5 2 154 3 105 J/kg; Heat ofsolution: 4.0 3 105 J/kg; Flash point= 30℃. NFPA 704 MHazard Identification (based on NFPA-704 M RatingSystem): Health 3, Flammability 2, Reactivity 2 . Reactswith water.

UsesIntermediate for silicones.

General DescriptionA colorless to yellow liquid with a pungent odor. Amyltrichlorosilane (mixed isomers)(Pentyltrichlorosilane) is combustible and has a flash point of 145°F. Corrosive to metals and tissue.

Related reactions

3 records
New reaction record
HRID 208456 reaction equation
HRID 208456As reactant
HRID 258955 reaction equation
HRID 258955As reactant
HRID 1680909 reaction equation
HRID 1680909As product

Compound notes

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes

The silanes decomp at elevated temp to liberate hydrogen and deposit a high purity silicon, which leads to some of the principal uses of silanes. /Silanes/

When heated to decomposition it emits toxic fumes of /chlorine/.

PolymerizationPolymerizes easily
Vapor Pressure3.45 [mmHg]
Refractive IndexIndex of refraction = 1.4503 at 20 °C/D

Physicochemical properties

Boiling point
173 °C760 · 173 °C760 mm Hg(lit.)
Density
1.142 g/mL · 1.142 g/mL at 25 °C(lit.)
refractive index
20 · n20/D 1.4405(lit.)
Flash point
30 °C · 30°C
form
A liquid
Specific Gravity
1.14 · 1.14
Hydrolytic Sensitivity
8 · 8: reacts rapidly with moisture, water, protic solvents
EWG's Food Scores
1 · 1
FDA UNII
9 GP7288ZP · N9GP7288ZP
EPA Substance Registry System
Silane, trichloropentyl- (107-72-2)
Symbol(GHS)
2 · GHS02,GHS05,GHS06
Signal word
Danger
Hazard statements
226 · H226-H311-H314-H331
Precautionary statements
210 · P210-P233-P240-P241-P242-P243-P280-P260-P264-P261-P271-P303+P361+P353-P370+P378-P302+P352-P312-P361+P364-P301+P330+P331-P363-P304+P340-P310-P305+P351+P338-P311-P403+P235-P405-P403+P233-P501
Hazard Codes
C
Risk Statements
10 · 10-14-23/24-34
Safety Statements
16 · 16-26-36-45
RIDADR
1728 · UN 1728
WGK Germany
1 · 1
RTECS
4725000 · VV4725000
TSCA
TSCA listed
HazardClass
8 · 8
PackingGroup
II
Hazardous Substances Data
107 · 107-72-2(Hazardous Substances Data)
Toxicity
50 orl-rat: · LD50 orl-rat: 2340 mg/kg AIHAAP23,95,62

· TOXIC and/or CORROSIVE; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death.

Hazards Summary · 1 item

Produces hydrogen chloride when spilled in water; [ERG 2016] A mucous membrane irritant; Can cause severe burns to skin and eyes; [HSDB] Reacts with water producing hydrogen chloride gas; A mucous membrane irritant; Can cause severe burns to skin and eyes; [CAMEO] Reacts violently with water; A corrosive substance that can cause injury to the skin, eyes, and respiratory tract; Inhalation may cause chemical pneumonitis; [MSDSonline]

DOT ID and Guide1728 156
Reactive GroupChlorosilanes
RCRA RequirementsD003; A solid waste containing trichloropentylsilane may become characterized as a hazardous waste when subjected to testing for reactivity as stipulated in 40 CFR 261.23, and if so characterized, must be managed as a hazardous waste.
Reactivity AlertsWater-Reactive
Reactivity Profile · 1 item

Chlorosilanes, such as AMYLTRICHLOROSILANE, are compounds in which silicon is bonded to from one to four chlorine atoms with other bonds to hydrogen and/or alkyl groups. Chlorosilanes react with water, moist air, or steam to produce heat and toxic, corrosive fumes of hydrogen chloride. They may also produce flammable gaseous H2. They can serve as chlorination agents. Chlorosilanes react vigorously with both organic and inorganic acids and with bases to generate toxic or flammable gases.

Safety & protection

Fire FightingExcerpt from ERG Guide 156 [Substances - Toxic and/or Corrosive (Combustible / Water-Sensitive)]:
Accidental Release Measures · 2 items

· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.

· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.

First Aid · 2 items

Get medical attention immediately after exposure to this compound.

General First Aid:

Exposure Control and Personal Protection · 2 items

· Wear positive pressure self-contained breathing apparatus (SCBA).

TIH (Toxic Inhalation Hazard) - Term used to describe gases and volatile liquids that are toxic when inhaled. Some are TIH materials themselves, e.g., chlorine, and some release TIH gases when spilled in water, e.g., chlorosilanes. [ERG 2016].

Fire Fighting Procedures · 3 items

If material on fire or involved in fire: use dry chemical, dry sand, or carbon dioxide; do not use water on material itself; if large quantities of combustibles are involved, use water in flooding quantities as spray and fog; use water spray to knock down vapors, cool all affected containers with flooding quantities of water; apply water from as far a distance as possible.

Wear positive pressure self-contained breathing apparatus ... Wear appropriate chemical protective gloves, goots, and goggles.

Vapors are heavier than air and will collect in low areas. Vapors may travel long distances to ignition sources and flashback. Vapors in confined areas may explode when exposed to fire. Storage containers and parts of containers may rocket great distances, in many directions. If material or contaminated runoff enters waterways, notify downstream users of potentially contaminated waters. Notify local health and fire officials and pollution control agencies. From a secure, explosion-proof location, use water spray to cool exposed containers. If cooling streams are ineffective (venting sound increases in volume and pitch, tank discolors or shows any signs of deforming), withdraw immediately to a secure position.

Storage Conditions · 3 items

SRP: Operations involving entry into tanks or closed vessels, and emergency situations, require consideration of potentially oxygen deficient, or "immediately dangerous to life and health" IDLH environments. This may necessitate use of a self-contained breathing apparatus (SCBA), or a positive pressure supplied air respirator.

Store in tightly closed containers in a cool, well-ventilated area. Metal containers involving the transfer of this chemical should be grounded and bonded. Drums must be equipped with self-closing valves, pressure vacuum bungs, and flame arresters. Use only nonsparking tools and equipment, especially when opening and closing containers of this chemical. Sources of ignition, such as smoking and open flames, are prohibited where this chemical is used, handled, or stored in a manner that could create a potential fire or explosion hazard.

All containers, pipes, apparatus, installations, and structures used for manufacture, storage, transport, or use of these substances must be of material resistant to corrosive substances or be protected by suitable coatings ... All containers or receptacles should be clearly labelled to indicate their contents and should bear the danger symbol for corrosives. /Corrosive substances/

Cleanup Methods · 5 items

SRP: Wastewater from contaminant suppression, cleaning of protective clothing/equipment, or contaminated sites should be contained and evaluated for subject chemical or decomposition product concentrations. Concentrations shall be lower than applicable environmental discharge or disposal criteria. Alternatively, pretreatment and/or discharge to a permitted wastewater treatment facility is acceptable only after review by the governing authority and assurance that "pass through" violations will not occur. Due consideration shall be given to remediation worker exposure (inhalation, dermal and ingestion) as well as fate during treatment, transfer and disposal. If it is not practicable to manage the chemical in this fashion, it must be evaluated in accordance with EPA 40 CFR Part 261, specifically Subpart B, in order to determine the appropriate local, state and federal requirements for disposal.

Evacuate and restrict persons not wearing protective equipment from area of spill or leak until cleanup is complete. Remove all ignition sources. Ventilate area of spill or leak. Absorb liquids in vermiculite, dry sand, earth, peat, carbon, or a similar material and deposit in sealed containers. Keep amyltrichlorosilane out of a confined space, such as a sewer, because of the potential for an explosion, unless the sewer is designed to prevent the build-up of explosive concentrations. Collect powdered material in the most convenient and safe manner and deposit in sealed containers. It may be necessary to contain and dispose of this chemical as a hazardous waste. If material or contaminated runoff enters waterways, notify downstream users of potentially contaminated waters.

Environmental considerations - land spill: dig a pit, pond, lagoon, holding area to contain liquid or solid material /SRP: If time permits, pits, ponds, lagoons, soak holes, or holding areas should be sealed with an impermeable flexible membrane liner/; dike surface flow using soil, sand bags, foamed polyurethane, or foamed concrete; absorb bulk liquid with fly ash, cement powder, or commercial sorbents.

Environmental considerations - water spill: use natural barriers or oil spill control booms to limit spill travel; remove trapped material with suction hoses.

Environmental considerations - air spill: apply water spray or mist to knock down vapors.

Nonfire Spill ResponseExcerpt from ERG Guide 156 [Substances - Toxic and/or Corrosive (Combustible / Water-Sensitive)]:
Disposal Methods · 1 item

SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational harm/injury/toxicity or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal and plant life; and conformance with environmental and public health regulations.

Preventive Measures · 5 items

SRP: The scientific literature for the use of contact lenses by industrial workers is inconsistent. The benefits or detrimental effects of wearing contact lenses depend not only upon the substance, but also on factors including the form of the substance, characteristics and duration of the exposure, the uses of other eye protection equipment, and the hygiene of the lenses. However, there may be individual substances whose irritating or corrosive properties are such that the wearing of contact lenses would be harmful to the eye. In those specific cases, contact lenses should not be worn. In any event, the usual eye protection equipment should be worn even when contact lenses are in place.

SRP: Contaminated protective clothing should be segregated in a manner that results in no direct personal contact by personnel who handle, dispose of, or clean the clothing. Quality assurance procedures to confirm the efficacy of the cleaning procedures should be implemented prior to the decontaminated protective clothing being returned for reuse by the workers. Contaminated clothing (including shoes/socks) should not be taken home at end of shift, but should remain at employee's place of work for cleaning.

SRP: Local exhaust ventilation should be applied wherever there is an incidence of point source emissions or dispersion of regulated contaminants in the work area. Ventilation control of the contaminant as close to its point of generation is both the most economical and safest method to minimize personnel exposure to airborne contaminants. Ensure that the local ventilation moves the contaminant away from the worker.

Contact lenses should not be worn when working with this chemical.

For more Preventive Measures (Complete) data for Trichloropentylsilane (7 total), please visit the HSDB record page.

Isolation and Evacuation · 4 items

Excerpt from ERG Guide 156 [Substances - Toxic and/or Corrosive (Combustible / Water-Sensitive)]:

Immediate precautionary measure

When spilled in water

When spilled in water

Toxic-by-Inhalation (TIH) GasHCl - when spill Amyltrichlorosilane into water.

Toxicology

Adverse EffectsDermatotoxin - Skin burns.
Human Toxicity Excerpts · 5 items

/SIGNS AND SYMPTOMS/ Acute inhalation exposure may result in sneezing, choking, laryngitis, dyspnea (shortness of breath), respiratory tract irritation, and chest pain. Higher exposure can cause pulmonary edema, a medical emergency that can be delayed for several hours. This can cause death. Bleeding of nose and gums, ulceration of the nasal and oral mucosa, pulmonary edema, chronic bronchitis, and pneumonia may also occur. If the eyes have come in contact with dimethyldichlorosilane, irritation, pain, swelling, corneal erosion, and blindness may result. Dermatitis (red, inflamed skin), severe burns, pain, and shock generally follow dermal exposure. Inhalation irritates mucous membranes. Severe gastrointestinal damage may occur. Vapors cause severe eye and lung injury. Upon short contact, second and third degree burns may occur. Signs and symptoms of acute ingestion of dimethyldichlorosilane may be severe and include increased salivation, intense thirst, difficulty swallowing, chills, pain, and shock. Oral, esophageal, and stomach burns are common. /Dimethyldichlorosilane/

/SIGNS AND SYMPTOMS/ Inhalation irritates mucous membranes. Contact with liq causes severe burns of eyes and skin ... Vapors cause severe irritation of eyes and throat and can cause eye and lung injury. They cannot be tolerated even at low concn. Causes second- and third-degree burns on short contact ...

/SIGNS AND SYMPTOMS/ Causes severe eye and skin burns. Serious health hazard. May be harmful if inhaled. Irritating to eye, skin, and respiratory system. /Dimethylchlorosilane/

/SIGNS AND SYMPTOMS/ Short Term Exposure: a corrosive chemical that can cause severe eye and skin burns. Exposure can irritate the eyes, nose, and throat. Higher levels can irritate the lungs causing coughing and/or shortness of breath; still higher exposures can cause pulmonary edema, a medical emergency which can be delayed for several hours. This can cause death. Long Term Exposure: Similar corrosive chemicals cause lung damage; bronchitis may develop.

For more Human Toxicity Excerpts (Complete) data for Trichloropentylsilane (8 total), please visit the HSDB record page.

Non-Human Toxicity Excerpts · 5 items

/LABORATORY ANIMALS: Acute Exposure/ Amyltrichlorosilane rated 9 on rabbit eyes. (Tested externally on eyes of rabbits and ... rated numerically on a scale of 1-10 according to degree of injury observed after 24 hr, paying particular attention to condition of the cornea. Most severe injuries have been rated 10).

/LABORATORY ANIMALS: Acute Exposure/ /When instilled/... into eye of rabbit all these compounds /methyl and ethyl chlorosilanes/, even at very low doses (0.05 mL), caused severe burns of cornea and eyelids ... /When applied/ to skin of rabbit the region attacked by chlorosilanes blanches, and blisters appear; action is more marked the damper the surface of the skin. /Chlorosilanes/

/LABORATORY ANIMALS: Acute Exposure/ /Via inhalation/ they have a corrosive action when brought into contact with mucous membranes. /Chlorosilanes/

/OTHER TOXICITY INFORMATION/ Hydrogen chloride AEGL values were adopted as AEGL values for monochlorosilanes, AEGL values for dichlorosilanes were derived by dividing the hydrogen chloride AEGL values by a molar adjustment factor of two, AEGL values for the title trichlorosilanes were derived by dividing the hydrogen chloride AEGL values by a molar adjustment factor of three, and AEGL values for tetrachlorosilane were derived by dividing the hydrogen chloride AEGL values by a molar adjustment factor of four.

For more Non-Human Toxicity Excerpts (Complete) data for Trichloropentylsilane (6 total), please visit the HSDB record page.

Environmental Abiotic Degradation · 1 item

Silane compounds decompose upon contact with water or steam to produce heat and toxic and corrosive fumes of hydrogen chloride. Silane ignites spontaneously in air(1,2). With a little ammonia, it forms a self-igniting product(1). /Chlorosilanes/

Environmental Fate/Exposure Summary · 1 item

Chlorosilane compounds' production and use as intermediates for silicone products may result in their release to the environment through various waste streams. However, these compounds decompose to release hydrogen chloride upon contact with water or steam. Therefore, volatilization, biodegradation, and bioconcentration are not expected to be important environmental fate processes. /Chlorosilanes/ (SRC)

Antidote and Emergency Treatment · 3 items

Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand-valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR as necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. /Silane, Chlorosilane, and Related Compounds/

Basic treatment: Establish a patent airway (oropharyngeal or nasopharyngeal airway, if needed). Suction if necessary. Watch for signs of respiratory insufficiency and assist ventilations if necessary. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Monitor for pulmonary edema and treat if necessary ... . Anticipate seizures and treat if necessary ... . Monitor for shock and treat if necessary ... . For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with 0.9% saline (NS) during transport ... . Do not use emetics. For ingestion, rinse mouth and administer 5 ml/kg up to 200 ml of water for dilution if the patient can swallow, has a strong gag reflex, and does not drool. Administer activated charcoal (refer to ingestion protocol in Section Three ... . Cover skin burns with sterile dressings after decontamination ... . /Silane, Chlorosilane, and Related Compounds/

Advanced treatment: Consider orotracheal or nasotracheal intubation for airway control in the patient who is unconscious, has severe pulmonary edema, or is in severe respiratory distress. Early intubation at the first sign of upper airway obstruction may be necessary. Positive-pressure ventilation techniques with a bag-valve-mask device may be beneficial. Consider drug therapy for pulmonary edema ... . Monitor cardiac rhythm and treat arrhythmias if necessary ... . Start IV administration of D5W /SRP: "To keep open", minimal flow rate/. Use 0.9% saline (NS) or lactated Ringer's (LR) if signs of hypovolemia are present. For hypotension with signs of hypovolemia, administer fluid cautiously. Consider vasopressors if patient is hypotensive with a normal fluid volume. Watch for signs of fluid overload ... . Treat seizures with diazepam or lorazepam ... . Use proparacaine hydrochloride to assist eye irrigation ... . /Silane, Chlorosilane, and related compounds/

Toxicity DataLCLo (rat) = 2,000 ppm/4h
Non-Human Toxicity Values · 2 items

LD50 Rat oral 2340 mg/kg

LD50 Rabbit skin 780 mg/kg

Regulatory information

RCRA RequirementsD003; A solid waste containing trichloropentylsilane may become characterized as a hazardous waste when subjected to testing for reactivity as stipulated in 40 CFR 261.23, and if so characterized, must be managed as a hazardous waste.
DHS Chemicals of Interest (COI) · 4 items

Amyltrichlorosilane

A Commercial Grade

A Placarded Amount

Chemical or material that can be mixed with readily available materials.

Safety data

wgk
1
tsca
TSCA listed
rtecs
VV4725000
ridadr
UN 1728
Toxicity
LD50 orl-rat: 2340 mg/kg AIHAAP23,95,62
risk_code
10-14-23/24-34
Signal word
Danger
Symbol(GHS)
GHS02,GHS05,GHS06
hazard_code
C
safety_code
16-26-36-45
hazard_class
8
packing_group
II
Hazard statements
H226-H311-H314-H331
Precautionary statements
P210-P233-P240-P241-P242-P243-P280-P260-P264-P261-P271-P303+P361+P353-P370+P378-P302+P352-P312-P361+P364-P301+P330+P331-P363-P304+P340-P310-P305+P351+P338-P311-P403+P235-P405-P403+P233-P501
Hazardous Substances Data
107-72-2(Hazardous Substances Data)