HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.1
  1. Home
  2. /Compound

Propylene glycol methyl ether acetate

HCID 7946
New reaction
Print
Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
108-65-6
Standard SMILES
COCC(C)OC(C)=O
InChIKey
LLHKCFNBLRBOGN-UHFFFAOYSA-N
Molecular formula
C6H12O3
Average molar mass
132.16 g/mol
Monoisotopic mass
132.07864424

Overview

Propylene glycol methyl ether acetate is a colorless liquid with a sweet ether-like odor. (USCG, 1999)

Names & identifiers

Preferred name
Propylene glycol methyl ether acetate
IUPAC
1-methoxypropan-2-yl acetate
English name
1-Methoxy-2-propyl acetate
Molecular formula
C6H12O3
Molecular weight
132.16

Names & synonyms

Propylene glycol methyl ether acetatePGMEA cpdRefChem:4334931-Methoxy-2-propyl acetate108-65-61-methoxypropan-2-yl acetatePropylene glycol monomethyl ether acetate2-Acetoxy-1-methoxypropane1-Methoxy-2-acetoxypropaneMETHOXYISOPROPYL ACETATE2-Methoxy-1-methylethyl acetate2-Propanol, 1-methoxy-, acetate
Show more names
PGMEAMPAPMA/PGMEADowanol PMAPMA-EL
1-METHOXY-2-PROPANOL ACETATEPropyleneglycol monomethyl ether acetateNSC 2207Acetic acid, 2-methoxy-1-methylethyl ester2-Propanol, 1-methoxy-, 2-acetatePropylene glycol 1-methyl ether 2-acetateMFCD00038500DTXSID1026796

Database identifiers

CAS
108-65-6、84540-57-8
PubChem CID
7946
DTXSID
DTXSID1026796
ChEMBL
CHEMBL3182130
UNII
PA7O2U6S2Q
EC Number
203-603-9
Nikkaji
J38.089J

Properties

Computed structural properties

XLogP
0.4
Topological polar surface area
35.5 Ų
Hydrogen bond donors
0
Hydrogen bond acceptors
3
Rotatable bonds
4
Heavy atoms
9
Formal charge
0
Complexity
90.3

Experimental & physicochemical properties

Solvents · 2 items

Solvents -> Glycol Ethers (P Series)

Solvents -> Glycol Ethers (P Series)

Cosmetics · 2 items

Cosmetic ingredients (Methoxyisopropyl Acetate) -> CIR (Cosmetic Ingredient Review)

Solvent

LogP · 2 items

log Kow = 0.56

0.56

OdorSweet, ether-like
Density · 6 items

0.969 at 68 °F (USCG, 1999) - Less dense than water; will float

0.969 at 20 °C

Saturated liquid density: 8.090 lbs/cu ft at 68 °F. Saturated vapor pressure: 0.072 lbs/sq in at 68 °C

Saturated vapor density: 0.00167 lbs/cu ft at 68 °C

Relative density (water = 1): 0.96

0.969

Viscosity1.23 sq mm/sec at 20 °C
Color/FormColorless liquid at 15 °C and 1 atm
Solubility · 3 items

In water, 1.98X10+5 mg/L at 25 °C

In water, 198 g/L at 20 °C, pH 6.8

Solubility in water, g/100ml: 19.8

Flash Point · 5 items

114 °F (USCG, 1999)

42 °C

45.5 °C (113.9 °F) - closed cup

108 °F (42 °C) - closed cup

42 °C c.c.

Endocrine DisruptorsPotential endocrine disrupting compound
Boiling Point · 6 items

302 °F at 760 mmHg (USCG, 1999)

145-146 °C

BP: 145.8 °C at 101.325 kPa

BP: 302 °F = 150 °C = 423 K at 1 atm

146 °C

302 °F

Decomposition · 2 items

Hazardous decomposition products formed under fire conditions - Carbon oxides.

When heated to decomposition it emits acrid smoke and irritating vapors.

Physicochemical properties

Melting point
67 °C · −67 °C (−89 °F; 206 K)
Boiling point
146 °C · 146 °C (295 °F; 419 K)
Density
0.962 g/cm3 · 0.962 g/cm3
vapor pressure
3.7 mm · 3.7 mm Hg ( 20 °C)
refractive index
1.4 · 1.40
Flash point
45 °C · 45 °C (113 °F; 318 K)
storage temp.
30 °C · Store below +30°C.
solubility
198 g/L · water: soluble198g/L at 20°C
form
liquid
color
Colorless
Odor
mild fruity odor
PH
4 · 4 (200g/l, H2O, 20℃)
explosive limit
1.5 % · 1.5%(V)
optical activity
-0.5827 ° · -0.5827°(C=1.0041g/100ml CHCL3)
Viscosity
1.23 mm2/s · 1.23mm2/s
Water Solubility
19.8 g/L · 19.8 g/L (25 ºC)
BRN
1751656 · 1751656
Henry's Law Constant
2.9 · 2.9×100 mol/(m3Pa) at 25℃, Duchowicz et al. (2020)
Exposure limits
50 ppm · EU LTEL: 50 ppm(275 mg/m3); EU STEL: 100 ppm(550 mg/m3)
Stability
Stable. Flammable. Incompatible with strong oxidizing agents, acids, bases.
Cosmetics Ingredients Functions
SOLVENT
Cosmetic Ingredient Review (CIR)
1 · 1-Methoxy-2-propyl acetate (108-65-6)
InChI
1S/C6H12O3/c1-5(4-8-3)9-6(2)7/h5H,4H2,1-3H3
InChIKey
LLHKCFNBLRBOGN-UHFFFAOYSA-N
SMILES
COCC(C)OC(C)=O
LogP
1.2 at · 1.2 at 20℃
CAS DataBase Reference
108 · 108-65-6(CAS DataBase Reference)
EWG's Food Scores
1 · 1-2
FDA UNII
7 O2U6S2Q · PA7O2U6S2Q
NIST Chemistry Reference
1 · 1-Methoxy-2-propyl acetate(108-65-6)
EPA Substance Registry System
1 · 1-Methoxy-2-propyl acetate (108-65-6)
UNSPSC Code
12352108 · 12352108
NACRES
22 · NA.22
Symbol(GHS)
2 · GHS02
Signal word
Warning
Hazard statements
226 · H226
Precautionary statements
210 · P210-P233-P240-P241-P242-P243
Hazard Codes
T,Xi
Risk Statements
61 · 61-10-36
Safety Statements
53 · 53-25-45
RIDADR
3271 · UN 3271 3/PG 3
WGK Germany
3 · 3
RTECS
8925000 · AI8925000
Autoignition Temperature
669 °F · 669 °F
TSCA
TSCA listed
HazardClass
3 · 3
PackingGroup
III
HS Code
2915390090 · 2915390090
Storage Class
3 · 3 - Flammable liquids
Hazard Classifications
3 · Flam. Liq. 3
Hazardous Substances Data
108 · 108-65-6(Hazardous Substances Data)
REACH Registrations
Active

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 6 items

Warning

H226: Flammable liquid and vapor [Warning Flammable liquids]

P210, P233, P240, P241, P242, P243, P280, P303+P361+P353, P370+P378, P403+P235, and P501 (click each P-code to see the statement)

This chemical does not meet GHS hazard criteria for < 0.1% (1 of 3028) of reports.

Warning

H226 (> 99.9%): Flammable liquid and vapor [Warning Flammable liquids]

Hazard information

Regulatory Information · 5 items

Chemical: 2-Propanol, 1-methoxy-, acetate

2-Propanol, 1-methoxy-, 2-acetate is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of 2-Propanol, 1-methoxy-, 2-acetate are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

PMN - indicates a commenced PMN (Pre-Manufacture Notices) substance.

REACH registered substance: 2-methoxy-1-methylethyl acetate (EC: 203-603-9)

2-Propanol, 1-methoxy-, acetate: Does not have an individual approval but may be used under an appropriate group standard

Other Safety InformationIMAP assessments - 2-Propanol, 1-methoxy-, acetate: Human health tier I assessment
DOT LabelFlammable Liquid
Fire Hazards · 2 items

Special Hazards of Combustion Products: Carbon dioxide and carbon monoxide may form when heated to decomposition. (USCG, 1999)

Flammable. Above 42 °C explosive vapour/air mixtures may be formed.

Fire PotentialFlammable.
Health HazardsNo significant adverse effects expected. (USCG, 1999)
Hazards Summary · 2 items

An eye and respiratory tract irritant; Inhalation of high concentrations can cause CNS depression; [ICSC] Silk-screen printers were exposed to about 20 ppm; PGMA is not tolerated by workers at concentrations >100 ppm because of objectionable odor and lacrimation. [AIHA] An irritant; [MSDSonline] See n-Propyl acetate.

An irritant; Targets the kidney and liver; [Sigma-Aldrich MSDS] See 1-Methoxy-2-propyl acetate.

Reactive GroupEsters, Sulfate Esters, Phosphate Esters, Thiophosphate Esters, and Borate Esters
EC ClassificationSymbol: Xi; R: 10-36; S: (2)-25
UN ClassificationUN Hazard Class: 3; UN Pack Group: III
TSCA Requirements · 2 items

Section 8(a) of TSCA requires manufacturers of this chemical substance to report preliminary assessment information concerned with production, exposure, and use to EPA as cited in the preamble in 51 FR 41329. Effective date: 1/26/94; Reporting date: 3/28/94.

Pursuant to section 8(d) of TSCA, EPA promulgated a model Health and Safety Data Reporting Rule. The section 8(d) model rule requires manufacturers, importers, and processors of listed chemical substances and mixtures to submit to EPA copies and lists of unpublished health and safety studies. Propylene glycol monomethyl ether acetate is included on this list. Effective date: 1/26/94; Sunset date: 12/19/95.

EPA Safer ChemicalChemical: Propylene glycol methyl ether acetate

Safety & protection

Fire Fighting · 2 items

Fire Extinguishing Agents Not to Be Used: Water.

Use alcohol-resistant foam, foam, powder, carbon dioxide. In case of fire: keep drums, etc., cool by spraying with water.

First Aid Measures · 4 items

Fresh air, rest. Refer for medical attention.

Remove contaminated clothes. Rinse skin with plenty of water or shower.

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

Rinse mouth. Give a slurry of activated charcoal in water to drink. Do NOT induce vomiting. Rest. Refer for medical attention .

First AidCall for medical aid.
Safe StorageFireproof. Separated from strong oxidants. Dry.
Exposure Control and Personal Protection50.0 [ppm]
Fire Fighting Procedures · 5 items

Suitable extinguishing media: Dry powder, dry sand. Unsuitable extinguishing media: Do NOT use water jet.

Advice for firefighters: Wear self-contained breathing apparatus for firefighting if necessary.

Use water spray to cool unopened containers.

Use alcohol-resistant foam, foam, powder, carbon dioxide. In case of fire: keep drums, etc., cool by spraying with water.

If material on fire or involved in fire: Use water in flooding quantities as fog. Use "alcohol" foam, dry chemical or carbon dioxide. Keep run-off water out of sewers and water sources. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible.

Storage Conditions · 2 items

Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Storage class (TRGS 510): 3: Flammable liquids.

Fireproof. Separated from strong oxidants. Dry.

Cleanup Methods · 2 items

ACCIDENTAL RELEASE MEASURES: Personal precautions, protective equipment and emergency procedures: Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapors accumulating to form explosive concentrations. Vapors can accumulate in low areas. Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Methods and materials for containment and cleaning up: Contain spillage, and then collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local/national regulations.

Collect leaking and spilled liquid in sealable containers as far as possible. Wash away remainder with plenty of water.

Nonfire Spill ResponseExcerpt from ERG Guide 127 [Flammable Liquids (Water-Miscible)]:
Disposal Methods · 2 items

SRP: Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in air, soil or water; effects on animal, aquatic and plant life; and conformance with environmental and public health regulations. If it is possible or reasonable use an alternative chemical product with less inherent propensity for occupational harm/injury/toxicity or environmental contamination.

Product: Offer surplus and non-recyclable solutions to a licensed disposal company. Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting as this material is highly flammable; Contaminated packaging: Dispose of as unused product.

Spillage DisposalCollect leaking and spilled liquid in sealable containers as far as possible. Wash away remainder with plenty of water.
Preventive Measures · 5 items

ACCIDENTAL RELEASE MEASURES: Personal precautions, protective equipment and emergency procedures: Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapors accumulating to form explosive concentrations. Vapors can accumulate in low areas. Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains.

Precautions for safe handling: Avoid inhalation of vapor or mist. Keep away from sources of ignition - No smoking. Take measures to prevent the build up of electrostatic charge.

Appropriate engineering controls: Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.

For more Preventive Measures (Complete) data for 1-Methoxy-2-propyl acetate (10 total), please visit the HSDB record page.

Toxicology

Body Burden · 2 items

At the end of a workweek 23 silkscreen printers gave a urine sample for capillary gas chromatographic analysis for 1,2-propanediol. The mean concentration was 2.52 (S.D. 2.01) mmol mol creatinine(-1) (median=1.76, n=23). The urinary excretion of 1,2-propanediol was linearly dependent on the preceding 1-methoxy-2-propanol exposure measured in the worker's breathing zone [y=0.99+0.28x, n=23, r=0.67, where y is the urinary 1,2-propanediol concentration, in mmol mol creatinine(-1) and x is the concentration, in cm3 m(-3), of 1-methoxy-2-propanol (90.2%), 1-ethoxy-2-propyl acetate (5.8%), 1-methoxy-2-propyl acetate (2.1%) and 1-ethoxy-2-propanol (1.9%) in the air].

Personal air sampling for fluorides and solvents was done at 35 semiconductor fabrication facilities in the United States. Fluoride compounds were used in etching and cleaning operations, and solvents were used in photoresist and developing operations. All personal solvent and fluoride levels were less than 2 percent of current Occupational Safety and Health Administration (OSHA) standards. Statistical models of the exposure determinants for the target agents found production level, as indicated by number of semiconductor wafer cassettes loaded/unloaded from the target machines or baths, was predictive of fluoride, xylene and 1-methoxy-2-propyl acetate exposures. The percent of fresh air ventilation and the percent of xylene in the photoresist were also significant determinants in the statistical model predicting personal xylene exposure levels.

Environmental Fate · 3 items

TERRESTRIAL FATE: Based on a classification scheme(1), a measured log Koc of 0.362, corresponding to a Koc of 2.3(2) indicates that 1-methoxy-2-propyl acetate is expected to have very high mobility in soil(SRC). Volatilization of 1-methoxy-2-propyl acetate from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 3.4X10-6 atm-cu m/mole(SRC), based upon its vapor pressure, 3.92 mm Hg(3), and water solubility, 1.98X10+5 mg/L(2). 1-Methoxy-2-propyl acetate is expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(2). 50% Biodegradation in less than one day using sandy and sandy loam soils(4) suggests that biodegradation is an important environmental fate process in soil(SRC).

AQUATIC FATE: Based on a classification scheme(1), a measured log Koc of 0.362, corresponding to a Koc of 2.3(2) indicates that 1-methoxy-2-propyl acetate is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon an estimated Henry's Law constant of 3.4X10-6 atm-cu m/mole(SRC), derived from its vapor pressure, 3.92 mm Hg(4), and water solubility, 1.2X10+5 mg/L(2). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 12 and 93 days, respectively(SRC). According to a classification scheme(5), an estimated BCF of 3(SRC), from its log Kow of 0.56(2) and a regression-derived equation(6), suggests the potential for bioconcentration in aquatic organisms is low(SRC). 100% Biodegadation in the Zahn-Wellens test(7) indicates that biodegradation is an important environmental fate process in water(SRC).

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 1-methoxy-2-propyl acetate, which has a vapor pressure of 3.92 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase 1-methoxy-2-propyl acetate is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 32 hrs(SRC), calculated from its rate constant of 1.2X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). d(1); this corresponds to half-lives of 2.4 yrs and 88 days at pH values of 7 and 8, respectively(1). Using an atmospheric simulation chamber, no photolysis of 1-methoxy-2-propyl acetate was observed(4); therefore, the compound is not expected to be susceptible to direct photolysis by sunlight(SRC).

Adverse Effects · 2 items

Neurotoxin - Acute solvent syndrome

Neurotoxin - Acute solvent syndrome

Exposure RoutesThe substance can be absorbed into the body by inhalation of its aerosol or vapour and by ingestion.
Toxicity Summary · 2 items

Safe in the present practices of use and concentration. Ingredient, concentration, and use information are available in documents discoverable at https://cir-reports.cir-safety.org

IDENTIFICATION AND USE: 1-Methoxy-2-propyl acetate is used as a solvent in cosmetic formulations, as well as in surface coatings, inks, and cleaners. HUMAN STUDIES: The substance defats the skin, which may cause dryness or cracking. It is irritating to the eyes and respiratory tract. Exposure at high levels could cause depression of the central nervous system. ANIMAL STUDIES: Watery eyes, anorexia, rapid shallow breathing, and excess salivation were observed in rats given a single dose of 4000, 6300, or 10,000 mg/kg 1-methoxy-2-propyl acetate. 1-Methoxy-2-propyl acetate was not a skin irritant in rabbits. 10% 1-methoxy-2-propyl acetate in water was not a sensitizer in a guinea pig maximization test. Some slight changes were observed in the appearance of renal tissues in rats exposed to 3000 ppm 1-methoxy-2-propyl acetate. Slight to moderate degeneration of the olfactory epithelium in the nasal cavities was seen in rats and in mice. 1-Methoxy-2-propyl acetate had no adverse effect on reproductive parameters in rat developmental studies. 1-Methoxy-2-propyl acetate did not induce mutations or toxicity in Salmonella typhimurium strains TA98, TA100, TA1535, or TA1537 or in Escherichia coli WP2 uvrA, with or without metabolic activation.

Signs and Symptoms · 4 items

Cough. Dizziness. Drowsiness. Headache. Nausea. Sore throat.

Dry skin.

Redness. Pain.

Abdominal pain. Diarrhoea. Unconsciousness.

Ongoing Test Status · 1 item

EPA has released the Interactive Chemical Safety for Sustainability (iCSS) Dashboard. The iCSS Dashboard provides an interactive tool to explore rapid, automated (or in vitro high-throughput) chemical screening data generated by the Toxicity Forecaster (ToxCast) project and the federal Toxicity Testing in the 21st century (Tox21) collaboration. /The title compound was tested by ToxCast and/or Tox21 assays/[USEPA; ICSS Dashboard Application; Available from, as of August 9, 2018: http://actor.epa.gov/dashboard/]

Soil Adsorption/Mobility · 1 item

A measured log Koc of 0.362, corresponding to a Koc of 2.3, was reported for 1-methoxy-2-propyl acetate(1). According to a classification scheme(2), this estimated Koc value suggests that 1-methoxy-2-propyl acetate is expected to have very high mobility in soil(SRC).

Atmospheric Concentrations · 1 item

SOURCE DOMINATED: 1-Methoxy-2-propyl acetate was present as 10 and 27% of total emissions from two of nine large-scale semiconductor manufacturing facilities in Hsin-chu, Taiwan, monitoried from October 2000-September 2001. The total VOC emission factor was estimated to be 0.038 kg/L for semiconductor manufacturing processes(1).

Human Toxicity Excerpts · 2 items

/SIGNS AND SYMPTOMS/ The substance defats the skin, which may cause dryness or cracking.

/SIGNS AND SYMPTOMS/ The substance is irritating to the eyes and respiratory tract. Exposure at high levels could cause depression of the central nervous system.

Artificial Pollution Sources · 1 item

1-Methoxy-2-propyl acetate's production and use in surface coatings, inks and cleaners(1), and in house paint, home maintenance and in auto finishing products(2) may result in its release to the environment through various waste streams(SRC).

Environmental Biodegradation · 1 item

AEROBIC: A 61% Theoretical Oxygen Demand has been reported for 1-methoxy-2-propyl acetate in a 20-day BOD test(1). C14-1-Methoxy-2-propyl acetate, present at 20 ppm, was 50% biodegradaded in less than one day using a sandy soil and a Londo sandy loam soil (Bay Co, MI) and a Tappan sandy loam (Midland, MI). The biodegradation product, 1-methoxy-2-propanol, was furthere degraded 97% within 6 days in the sandy loam soils; 12% biodegraded within 12 days in the sand soil(2). 1-Methoxy-2-propanol acetate was 100% biodegaded in the Zahn-Wellens test; half-lives of 5.5 days in the OECD 301F test (96% Theoretical Oxygen Demand) and 14.8 days in the 301E test (70% DOC removal) have been reported(3).

Regulatory information

TSCA Requirements · 2 items

Section 8(a) of TSCA requires manufacturers of this chemical substance to report preliminary assessment information concerned with production, exposure, and use to EPA as cited in the preamble in 51 FR 41329. Effective date: 1/26/94; Reporting date: 3/28/94.

Pursuant to section 8(d) of TSCA, EPA promulgated a model Health and Safety Data Reporting Rule. The section 8(d) model rule requires manufacturers, importers, and processors of listed chemical substances and mixtures to submit to EPA copies and lists of unpublished health and safety studies. Propylene glycol monomethyl ether acetate is included on this list. Effective date: 1/26/94; Sunset date: 12/19/95.

Safety data

wgk
3
tsca
TSCA listed
rtecs
AI8925000
ridadr
UN 3271 3/PG 3
hs_code
2915390090
risk_code
61-10-36
Signal word
Warning
Symbol(GHS)
GHS02
hazard_code
T,Xi
safety_code
53-25-45
hazard_class
3
Storage Class
3 - Flammable liquids
packing_group
III
Hazard statements
H226
REACH Registrations
Active
Hazard Classifications
Flam. Liq. 3
Autoignition Temperature
669 °F
Precautionary statements
P210-P233-P240-P241-P242-P243
Hazardous Substances Data
108-65-6(Hazardous Substances Data)

Chemistry & industry

Pharmacology

Biological Half-Life · 3 items

... Male F344 rats /were given/ an intravenous injection of 10 or 100 mg/kg methoxyisopropanol or 14.7 or 147 mg/kg methoxyisopropyl acetate into an indwelling jugular vein cannula (number of animals per treatment not reported). ... The /half-life/ values for the low and high doses of methoxyisopropyl acetate were 1.6 and 2.3 min, respectively.

... Rat blood and liver homogenate /were incubated/ with 5 or 50 ug/mL methoxyisopropyl acetate and ... the in vitro hydrolysis rate of methoxyisopropyl acetate to methoxyisopropanol /was measured/ in each tissue type. The hydrolysis /half-life/ values of methoxyisopropyl acetate in whole rat blood was 16 and 15 min with the 5 and 50 ug/mL concentrations, respectively. The /half-life/ of methoxyisopropyl acetate hydrolysis in rat liver homogenate was 34 min for both concentrations.

... Human whole blood and liver homogenate /was incubated/ with 5 or 50 ug/mL methoxyisopropyl acetate and ... the in vitro hydrolysis rate of methoxyisopropyl acetate to methoxyisopropanol /was measured/ in each tissue type. The hydrolysis half-lives of methoxyisopropyl acetate in whole blood was 36 and 34 min with the 5 and 50 ug/mL concentrations, respectively. The /half-life/, of methoxyisopropyl acetate hydrolysis in human liver homogenate was 27 to 30 min for both concentrations.

Metabolism/Metabolites · 5 items

Male rats (number not given) were given a single oral dose of 8.7 mmol/kg [1-(14)C]methoxyisopropyl acetate. Approximately 64% of the administered radioactivity was exhaled as (14)CO2and 24% was excreted in urine within 48 hr of the oral dose. Free methoxyisopropanol and methoxyisopropanol sulfate and glucuronide conjugates were identified in the urine.

... Male F344 rats (number not given) were exposed to 3000 ppm [1-(14)C]methoxyisopropyl acetate in an inhalation chamber for 6 hr. Approximately 53% of the administered radioactivity was exhaled as (14)CO2,and 26% was excreted in urine within 48 hr of the end of the inhalation expo sure period. Methoxyisopropanol and sulfate and glucuronide conjugates were identified in the urine.

... The rate of hydrolysis of methoxyisopropyl acetate by carboxylesterase /were measured/ in the nasal mucosa of mice, rats, rabbits, and dogs. Samples of nasal mucosal tissue from each species were incubated in vials with 1.0 to 23 mM methoxyisopropyl acetate for 10 min, and then centrifuged. The supernatant was removed and analyzed by gas chromatography to measure the methoxyisopropanol content. The apparent Vmax and Km for the hydrolysis of methoxyisopropyl acetate were 0.080 x 10(-3) M/min and 2.67 x 10(-3) M, respectively.

The similarities between the metabolism and disposition of methoxyisopropyl acetate and those previously observed in methoxyisopropanol indicated that methoxyisopropyl acetate is rapidly hydrolyzed to methoxyisopropanol.

For more Metabolism/Metabolites (Complete) data for 1-Methoxy-2-propyl acetate (6 total), please visit the HSDB record page.

Absorption, Distribution and Excretion · 4 items

Male rats (number not given) were given a single oral dose of 8.7 mmol/kg [1-(14)C]methoxyisopropyl acetate. Approximately 64% of the administered radioactivity was exhaled as (14)CO2and 24% was excreted in urine within 48 hr of the oral dose. Free methoxyisopropanol and methoxyisopropanol sulfate and glucuronide conjugates were identified in the urine.

... Male F344 rats (number not given) were exposed to 3000 ppm [1-(14)C]methoxyisopropyl acetate in an inhalation chamber for 6 hr. Approximately 53% of the administered radioactivity was exhaled as (14)CO2,and 26% was excreted in urine within 48 hr of the end of the inhalation expo sure period. Methoxyisopropanol and sulfate and glucuronide conjugates were identified in the urine.

... The rate of hydrolysis of methoxyisopropyl acetate by carboxylesterase /were measured/ in the nasal mucosa of mice, rats, rabbits, and dogs. Samples of nasal mucosal tissue from each species were incubated in vials with 1.0 to 23 mM methoxyisopropyl acetate for 10 min, and then centrifuged. The supernatant was removed and analyzed by gas chromatography to measure the methoxyisopropanol content. The apparent Vmax and Km for the hydrolysis of methoxyisopropyl acetate were 0.080 x 10(-3) M/min and 2.67 x 10(-3) M, respectively.

... Male F344 rats /were given/ an intravenous injection of 10 or 100 mg/kg methoxyisopropanol or 14.7 or 147 mg/kg methoxyisopropyl acetate into an indwelling jugular vein cannula (number of animals per treatment not reported). Blood samples from the jugular vein cannulae were collected 5, 10, 15, 30, and 45 min and 1, 2, 4, 6, 8, and 12 hr after injection. The blood time courses of methoxyisopropanol elimination for both doses of both compounds were identical. The /half-life/ values for the low and high doses of methoxyisopropyl acetate were 1.6 and 2.3 min, respectively. The clearance rates of 14.7 and 147 mg/kg methoxyisopropyl acetate were 4 and 11.0 mL/min, respectively.

Uses & manufacturing

Uses · 5 items

CIR ingredient: Methoxyisopropyl Acetate

Used as a solvent for paints, inks, lacquers, varnishes, cleaners, coatings, ink-removers, and pesticides; [eChemPortal: SIDSUNEP] Used in photoresist formulations in the semiconductor industry; Also used in solvents for degreasing circuit boards and in food contact applications; [CHEMINFO]

Metal Degreasing [Category: Clean]

Permitted for use as an inert ingredient in non-food pesticide products; [EPA]

Methoxyisopropyl acetate functions as a solvent in cosmetic formulations ... . Methoxyisopropyl acetate is used in surface coatings, inks, and cleaners.

ImpuritiesMethoxyisopropyl acetate may contain less than 0.5% of the alpha-isomer, 2-methoxy-1-propyl acetate and 0.2% propanol.
U.S. Production · 2 items

2023: 85,000,000 - <100,000,000 lb

Non-confidential 2016 Chemical Data Reporting (CDR) information on the production and use of chemicals manufactured or imported into the United States. Chemical: Propylene glycol methyl ether acetate:

Consumer UsesCleaning agent
Industry UsesNot Known or Reasonably Ascertainable
Household ProductsInformation on 132 consumer products that contain 1-Methoxy-2-propanol acetate in the following categories is provided:
Use Classification · 3 items

EPA Safer Chemical Functional Use Classes -> Solvents

Safer Chemical Classes -> Green half-circle - The chemical is expected to be of low concern

Cosmetics -> Solvent

General Manufacturing Information · 2 items

Synthetic Dye and Pigment Manufacturing

2-Propanol, 1-methoxy-, 2-acetate: ACTIVE

Applications · 3 items

DescriptionPropylene glycol methyl ether acetate (PGMEA), also known as propylene glycol monomethyl ether acetate, with molecular formula of C6H12O3, is a colorless hygroscopic liquid with special smell. It is a non pollution solvent with multi-functional groups. It is mainly used as the solvent of ink, paint, ink, textile dye and textile oil agent, and also as the cleaning agent in the production of LCD. Flammable, may form explosive vapor / air mixture above 42 ° C. Propylene glycol methyl ether acetate (PGMEA) is an advanced solvent. Its molecule has both ether bond and carbonyl. Carbonyl forms the structure of ester and contains alkyl at the same time. In the same molecule, there are both non-polar and polar parts. The functional groups of these two parts not only restrict and repel each other, but also play their inherent roles. Therefore, it has a certain solubility for non-polar substances and polar substances.1-Methoxy-2-propyl acetate (PGMEA) is a material contains polar groups and non polar group , has good ability of dissolving and coupling, commonly used in solvent based coatings and screen printing ink. Using dipropylene glycol methyl ether and acetic acid as raw material, under the catalysis of solid acid, via esterification reaction to generated crude product and its high purity PGMEA after distillation.

Uses1,2-Propanediol monomethyl ether acetate is used as a solvent for paints, inks, lacquers, varnishes, cleaners and coatings. It is also used as a solvent for degreasing circuit boards and in food contact applications. Further, it is used in photoresist formulations in the semiconductor industry.

General DescriptionPropylene glycol monomethyl ether acetate (PGMEA) is a photoresist solvent. Its degradation by microorganisms in different soil types has been investigated. An oral reference dose (RfD) value of PGMEA has been obtained from inhalation studies. The solubility of (5-alkylsulfonyloxyimino-5H-thiophen-2-ylidene)-2-methylphenyl-acetonitriles in PGMEA has been analyzed.

Upstream & downstream products

Downstream products

(S)-(+)-1-Methoxy-2-propanol

Related reactions

105 records
New reaction record
HRID 80347 reaction equation
HRID 80347As reactantuspto-grants-2014_09
HRID 237188 reaction equation
HRID 237188As reactantuspto-grants-2014_02
HRID 252877 reaction equation
HRID 252877As productuspto-grants-2011_01
HRID 252878 reaction equation
HRID 252878As productuspto-grants-2011_01
HRID 252879 reaction equation
HRID 252879As productuspto-grants-2011_01
HRID 333563 reaction equation
HRID 333563As solventuspto-grants-2014_11
HRID 353015 reaction equation
HRID 353015As solventuspto-grants-2004_06
HRID 353683 reaction equation
HRID 353683As reactantuspto-grants-2004_06
PreviousPage 1 of 14

Compound notes

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes