HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Compound

Hydracrylonitrile

HCID 8011
New reaction
Print
Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
109-78-4
Standard SMILES
N#CCCO
InChIKey
WSGYTJNNHPZFKR-UHFFFAOYSA-N
Molecular formula
C3H5NO
Average molar mass
71.08 g/mol
Monoisotopic mass
71.03711378

Overview

Ethylene cyanohydrin is a colorless to yellow-brown liquid with a weak odor. Sinks and mixes with water. (USCG, 1999)

Names & identifiers

Preferred name
Hydracrylonitrile
IUPAC
3-hydroxypropanenitrile
English name
3-Hydroxypropionitrile
Molecular formula
C3H5NO
Molecular weight
71.08

Names & synonyms

HydracrylonitrileRefChem:1391283-Hydroxypropionitrile109-78-43-HydroxypropanenitrileETHYLENE CYANOHYDRIN2-CyanoethanolPropanenitrile, 3-hydroxy-Glycol cyanohydrinbeta-Hpnbeta-Cyanoethanol2-Cyanoethyl alcohol
Show more names
CyanoethanolHydroxyacrylonitrile3-HYDROXYPROPIONONITRILENSC 2598usafrh-7
MethanolacetonitrileHydroxypropanenitrile2-HydroxycyanoethaneUSAF RH-7beta-Hpn3Propionitrile, 3-hydroxy-2-Hydroxyethyl cyanide2-Hydroxyethylkyanid

Database identifiers

CAS
109-78-4
PubChem CID
8011
DTXSID
DTXSID1025433
ChEBI
CHEBI:234504
UNII
7V8108WN46
EC Number
203-704-8
Nikkaji
J5.090C

Properties

Computed structural properties

XLogP
-0.9
Topological polar surface area
44 Ų
Hydrogen bond donors
1
Hydrogen bond acceptors
2
Rotatable bonds
1
Heavy atoms
5
Formal charge
0
Complexity
51.2

Experimental & physicochemical properties

Chemical Classes · 2 items

Nitrogen Compounds -> Nitriles

Reactive agents - 2nd degree

SpringerMaterials PropertiesCoriolis coupling
LogP · 3 items

log Kow= -0.94

-0.94

-0.94

Density · 3 items

1.047 at 68 °F (USCG, 1999) - Denser than water; will sink

1.0404 @ 25 °C

Relative density (water = 1): 1.04

Color/Form · 2 items

WATER-WHITE LIQUID

Straw-colored liquid

Solubility · 6 items

greater than or equal to 100 mg/mL at 68 °F (NTP, 1992)

Miscible in ethanol; soluble in chloroform; slightly soluble in ethyl ether.

Miscible with acetone, methyl ethyl ketone, ethanol, chloroform, and diethyl ether; insoluble in benzene, carbon tetrachloride, and naphtha.

Miscible with acetone, methyl ethyl ketone, ethyl alcohol. Slightly sol in ether (2.3% w/w @ 15 °C). Insol in benzene, petr ether, carbon disulfide, carbon tetrachloride.

In water, 1X10+6 mg/l @ 20 °C

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 6 items

This chemical does not meet GHS hazard criteria for 75.4% (144 of 191) of all reports.

Warning

H315 (24.6%): Causes skin irritation [Warning Skin corrosion/irritation]

P261, P264, P264+P265, P271, P280, P302+P352, P304+P340, P305+P351+P338, P319, P321, P332+P317, P337+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 191 reports by companies from 7 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Not Classified

Hazard information

Regulatory Information · 4 items

Chemical: Propanenitrile, 3-hydroxy-

REACH registered substance: 3-hydroxypropiononitrile (EC: 203-704-8)

Hydracrylonitrile: Does not have an individual approval but may be used under an appropriate group standard

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

DOT LabelPoison
Fire Hazards · 2 items

Special Hazards of Combustion Products: Toxic gases are generated when heated.

Combustible. Gives off irritating or toxic fumes (or gases) in a fire.

Fire PotentialDANGEROUS, WHEN EXPOSED TO HEAT OR FLAME. ...WILL REACT WITH WATER OR STEAM TO PRODUCE...FLAMMABLE VAPORS.
Health HazardsLiquid causes eye irritation. If swallowed, may cause severe kidney injury. (USCG, 1999)
Hazards Summary

Chemistry & industry

Pharmacology

Metabolism/Metabolites · 2 items

Apparently, when the hydroxyl group is in the beta position relative to the nitrile group, the compound is not hydrolyzed in the body to release cyanide.

Cyanide is rapidly alsorbed through oral, inhalation, and dermal routes and distributed throughout the body. Cyanide is mainly metabolized into thiocyanate by either rhodanese or 3-mercaptopyruvate sulfur transferase. Cyanide metabolites are excreted in the urine. (L96)

Uses & manufacturing

Uses · 3 items

Used as a solvent for cellulose acetate and ethylcellulose, in organic synthesis, and to stimulate sprouting in potatoes; [Hawley]

Solvent for certain cellulose esters and inorganic salts; organic intermediate for acrylates.

Synthesis of acrylonitrile

Methods of Manufacturing · 2 items

/It is/ prepared by interaction of ethylene chlorohydrin and alkali cyanide.

Obtained by reacting ethylene oxide with hydrogen cyanide or from hydratin of acrylonitrile.

General Manufacturing Information · 2 items

Propanenitrile, 3-hydroxy-: ACTIVE

It was used as feedstock in the production of acrylic acid and acrylates.

Applications · 5 items

Occurrence3-Hydroxypropionitrile does not occur as a natural product. Nevertheless, it may enter natural waters because it is present in concentrations between 2000 and 4000 p.p.m. in polyacrylimide polymers (Ikeda 1978) which are used as coagulants in water and wastewater purification. 3-Hydroxypropionitrile may leach from the polymer and enter the water being treated with the coagulant. Since acrylimide polymers are generally present at concentrations up to 1 p.p.m. during water purification (Sauerhoff et al 1976), if all the 3-Hydroxypropionitrile were extracted from the polymer, the concentration in water might be as high as 4 p.p.b. Fortunately, up to 99% of the 3-Hydroxypropionitrile may be removed by treatment with activated carbon in countercurrent multistage fluidized beds (Sasaoka 1975).

Related reactions

99 records
New reaction record
HRID 67713 reaction equation
HRID 67713As reactant
HRID 97430 reaction equation
HRID 97430As reactant
HRID 140377 reaction equation
HRID 140377As reactant
HRID 167673 reaction equation
HRID 167673As reactant
HRID 178257 reaction equation
HRID 178257As reactant
HRID 217311 reaction equation
HRID 217311As reactant
HRID 217313 reaction equation
HRID 217313As reactant
HRID 224224 reaction equation
HRID 224224As reactant
PreviousPage 1 of 13

Compound notes

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes

Solubility in water: miscible

Flash Point · 3 items

greater than 265 °F (NTP, 1992)

265 °F (129 °C) (Open cup)

129 °C o.c.

Boiling Point · 2 items

442 °F at 760 mmHg (slight decomposition) (NTP, 1992)

221 °C

Decomposition · 2 items

WHEN HEATED OR ON CONTACT WITH ACID OR ACID FUMES, IT EMITS HIGHLY TOXIC FUMES OF CYANIDES.

228 °C

Melting Point · 3 items

-51 °F (NTP, 1992)

-46 °C

-46 °C

Vapor Density · 3 items

2.5 (NTP, 1992) - Heavier than air; will sink (Relative to Air)

2.45 (AIR= 1)

Relative vapor density (air = 1): 2.45

Vapor Pressure · 4 items

0.08 mmHg at 77 °F ; 20 mmHg at 243 °F (NTP, 1992)

0.08 [mmHg]

0.08 MM HG @ 25 °C

Vapor pressure, Pa at 25 °C: 10.7

Physicochemical properties

Melting point
46 °C · −46 °C (lit.)
Boiling point
221 °C · 221 °C
Density
1.05 · 1.05
vapor density
2.5 · 2.5 (vs air)
vapor pressure
0.1 mm · <0.1 mm Hg ( 20 °C)
refractive index
1.43 · 1.43
Flash point
137 °C · 137 °C
storage temp.
30 °C · Store below +30°C.
solubility
2.3 % · diethyl ether: slightly soluble2.3% (w/w) at 15°C(lit.)
pka
13.82 · 13.82±0.10(Predicted)
form
clear liquid
color
Colorless to Almost colorless
Specific Gravity
1.047 · 1.047 (20/4℃)
Odor
Odorless
PH
3 · 3.0-4.5 (H2O, 20℃)(undiluted)
explosive limit
12.1 % · 12.1%
Viscosity
4.05 mm2/s · 4.05mm2/s
Water Solubility
10 g/100 · >=10 g/100 mL at 20 ºC
Merck
14 · 14,3794
BRN
635773 · 635773
Henry's Law Constant
1.3 · 1.3×103 mol/(m3Pa) at 25℃, Duchowicz et al. (2020)
Exposure limits
25 mg/m3 · NIOSH: IDLH 25 mg/m3
Stability
Stable. Flammable. Incompatible with strong oxidizing agents. Reacts with water or steam to release toxic vapours. Reacts violently with acids, amines, inorganic bases. Corrodes mild steel.
InChI
1S/C3H5NO/c4-2-1-3-5/h5H,1,3H2
InChIKey
WSGYTJNNHPZFKR-UHFFFAOYSA-N
SMILES
OCCC#N
LogP
-0.94 at · -0.94 at 20℃
CAS DataBase Reference
109 · 109-78-4(CAS DataBase Reference)
Indirect Additives used in Food Contact Substances
ETHYLENE CYANOHYDRIN
FDA 21 CFR
175.105 · 175.105
EWG's Food Scores
1 · 1
FDA UNII
7 V8108WN46 · 7V8108WN46
NIST Chemistry Reference
3 · Propanenitrile,3-hydroxy-(109-78-4)
EPA Substance Registry System
Ethylene cyanohydrin (109-78-4)
UNSPSC Code
12352117 · 12352117
NACRES
22 · NA.22
Symbol(GHS)
7 · GHS07,GHS08
Signal word
Warning
Hazard statements
315 · H315-H319-H373-H303-H335
Precautionary statements
261 · P261-P280a-P304+P340-P305+P351+P338-P405-P501a-P260-P264-P280-P302+P352+P332+P313+P362+P364-P305+P351+P338+P337+P313-P314-P501
PPE
Eyeshields, Gloves, type ABEK (EN14387) respirator filter
Hazard Codes
Xi
Risk Statements
36 · 36/37/38
Safety Statements
26 · 26-36-24/25
RIDADR
2810 · 2810
WGK Germany
1 · 1
RTECS
5250000 · MU5250000
F
8 · 8-10
Autoignition Temperature
922 °F · 922 °F
Hazard Note
Irritant
TSCA
TSCA listed
HS Code
29269095 · 29269095
Storage Class
10 · 10 - Combustible liquids
Hazardous Substances Data
109 · 109-78-4(Hazardous Substances Data)
Toxicity
50 orally · LD50 orally in rats: 10.0 g/kg (Smyth, Carpenter)
REACH Registrations
Active
· 1 item

A skin and eye irritant; Releases hydrogen cyanide when heated or in contact with acids/water; [ICSC] An eye irritant; [HSDB] Reacts with water evolving toxic flammable gases; An eye irritant; [CAMEO] An irritant; Harmful by ingestion, inhalation, or skin absorption; [Aldrich MSDS] See NITRILES.

FDA RequirementsEthylene cyanohydrin is an indirect food additive for use only as a component of adhesives.
Reactive GroupAlcohols and Polyols
RCRA Requirements · 1 item

D003; A solid waste containing a cyanide cmpd may become characterized as a hazardous waste when subjected to testing for reactivity as stipulated in 40 CFR 261.23, and if so characterized, must be managed as a hazardous waste. ... Cyanide bearing waste which, when exposed to pH conditions between 2 and 12.5, can generate toxic gases, vapors or fumes in a quantity sufficient to present a danger to human health or the environment. /Cyanide cmpd/

Reactivity Profile · 1 item

ETHYLENE CYANOHYDRIN reacts violently with mineral acids, amines and inorganic bases. It also reacts violently with chlorosulfonic acid, sulfuric acid, oleum and sodium hydroxide. It is incompatible with bases, oxidizing agents, moisture and heat. It is corrosive to mild steel. (NTP, 1992)

Chemical DangersThe substance may polymerize under the influence of organic bases. Decomposes on heating and on contact with acids, acid fumes and water. This produces highly toxic fumes including hydrogen cyanide. Reacts violently with strong oxidants.
Flammable LimitsLower flammable limit: 2.3% by volume; Upper flammable limit: 12.1% by volume

Safety & protection

Fire Fighting · 2 items

Fire Extinguishing Agents Not to Be Used: Water or foam may cause frothing.

Use powder, alcohol-resistant foam, carbon dioxide.

First Aid Measures · 4 items

Fresh air, rest.

Rinse skin with plenty of water or shower.

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

Rinse mouth.

First Aid · 1 item

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

Safe StorageSeparated from acids, bases and oxidants. Cool. Dry. Keep in a well-ventilated room.
Firefighting HazardsClosed containers may rupture violently when heated.
Fire Fighting Procedures · 1 item

Use water spray, dry chemical, "alcohol resistant" foam, or carbon dioxide. Water or foam may cause frothing. Use water spray to keep fire-exposed containers cool. Fight fire from protected location or maximum possible distance. Approach fire from upwind to avoid hazardous vapors and toxic decomposition products.

Storage ConditionsStore in a cool, dry, well-ventilated location. Separate from oxidizing materials. Outside or detached storage is preferred.
Cleanup MethodsStop or control the leak, if this can be done without undue risk. Use water spray to cool and disperse vapors, protect personnel, and dilute spills to form nonflammable mixtures. Absorb in noncombustible material for proper disposal.
Nonfire Spill Response · 1 item

SMALL SPILLS AND LEAKAGE: If you should spill this chemical, use absorbent paper to pick up all liquid spill material. Seal the absorbent paper, as well as any of your clothing which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Wash any surfaces you may have contaminated with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.

Disposal Methods · 1 item

SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.

Spillage Disposal · 1 item

Personal protection: filter respirator for organic gases and vapours adapted to the airborne concentration of the substance. Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations.

Preventive Measures · 2 items

SRP: The scientific literature for the use of contact lenses in industry is conflicting. The benefit or detrimental effects of wearing contact lenses depend not only upon the substance, but also on factors including the form of the substance, characteristics and duration of the exposure, the uses of other eye protection equipment, and the hygiene of the lenses. However, there may be individual substances whose irritating or corrosive properties are such that the wearing of contact lenses would be harmful to the eye. In those specific cases, contact lenses should not be worn. In any event, the usual eye protection equipment should be worn even when contact lenses are in place.

SRP: Local exhaust ventilation should be applied wherever there is an incidence of point source emissions or dispersion of regulated contaminants in the work area. Ventilation control of the contaminant as close to its point of generation is both the most economical and safest method to minimize personnel exposure to airborne contaminants.

Toxicology

Treatment · 1 item

Antidotes to cyanide poisoning include hydroxocobalamin and sodium nitrite, which release the cyanide from the cytochrome system, and rhodanase, which is an enzyme occurring naturally in mammals that combines serum cyanide with thiosulfate, producing comparatively harmless thiocyanate. Oxygen therapy can also be administered. (L97)

Health Effects · 1 item

Exposure to high levels of cyanide for a short time harms the brain and heart and can even cause coma, seizures, apnea, cardiac arrest and death. Chronic inhalation of cyanide causes breathing difficulties, chest pain, vomiting, blood changes, headaches, and enlargement of the thyroid gland. Skin contact with cyanide salts can irritate and produce sores. (L96, L97)

Environmental Fate · 3 items

TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 1(SRC), determined from a structure estimation method(2), indicates that ethylene cyanohydrin is expected to have very high mobility in soil(SRC). Volatilization of ethylene cyanohydrin from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 4.3X10-10 atm-cu m/mole(SRC), using a fragment constant estimation method(3). Ethylene cyanohydrin is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 0.0802 mm Hg(4). Biodegradation in soil may be an important environmental fate process as ethylene cyanohydrin is confirmed to be biodegradable according to the standard test of the Japanese Ministry of Industry and Trade (MITI)(5).

AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 1(SRC), determined from a structure estimation method(2), indicates that ethylene cyanohydrin is not expected to adsorb to suspended solids and sediment in water(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 4.3X10-10 atm-cu m/mole(SRC), developed using a fragment constant estimation method(4). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 67 hrs and 33 days, respectively(SRC). According to a classification scheme(5), an estimated BCF of 3.2(SRC), from its log Kow of -0.94(6) and a regression-derived equation(7), suggests the potential for bioconcentration in aquatic organisms is low. Biodegradation in water may be an important environmental fate process as ethylene cyanohydrin is confirmed to be biodegradable according to the standard test of the Japanese Ministry of Industry and Trade (MITI)(8).

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), ethylene cyanohydrin, which has a vapor pressure of 0.0802 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase ethylene cyanohydrin is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 21 days(SRC), calculated from its rate constant of 0.75X10-12 cu cm/molecule-sec at 25 °C(SRC) determined using a structure estimation method(3).

Adverse EffectsOther Poison - Chemical Asphyxiant
Exposure Routes · 2 items

The substance can be absorbed into the body by inhalation of its vapour and by ingestion.

Oral (L96) ; inhalation (L96) ; dermal (L96)

Toxicity Summary · 1 item

Cyanide is an inhibitor of cytochrome c oxidase in the fourth complex of the electron transport chain (found in the membrane of the mitochondria of eukaryotic cells). It complexes with the ferric iron atom in this enzyme. The binding of cyanide to this cytochrome prevents transport of electrons from cytochrome c oxidase to oxygen. As a result, the electron transport chain is disrupted and the cell can no longer aerobically produce ATP for energy. Tissues that mainly depend on aerobic respiration, such as the central nervous system and the heart, are particularly affected. Cyanide is also known produce some of its toxic effects by binding to catalase, glutathione peroxidase, methemoglobin, hydroxocobalamin, phosphatase, tyrosinase, ascorbic acid oxidase, xanthine oxidase, succinic dehydrogenase, and Cu/Zn superoxide dismutase. Cyanide binds to the ferric ion of methemoglobin to form inactive cyanmethemoglobin. (L97)

Signs and Symptoms · 3 items

Redness.

Redness. Pain.

Cyanide poisoning is identified by rapid, deep breathing and shortness of breath, general weakness, giddiness, headaches, vertigo, confusion, convulsions/seizures and eventually loss of consciousness. (L96, L97)

Soil Adsorption/Mobility · 1 item

Using a structure estimation method based on molecular connectivity indices(1), the Koc for ethylene cyanohydrin can be estimated to be about 1(SRC). According to a classification scheme(2), this estimated Koc value suggests that ethylene cyanohydrin is expected to have very high mobility in soil.

Human Toxicity Excerpts · 3 items

LIQ CAUSES EYE IRRITATION. IF SWALLOWED, MAY CAUSE SEVERE KIDNEY INJURY.

/IT IS/...CONSIDERED TO BE MODERATELY HAZARDOUS BY INGESTION AND SKIN CONTACT AND SLIGHTLY HAZARDOUS BY INHALATION.

This material seems to be of a very low order of toxicity compared to some nitriles.

Artificial Pollution SourcesEthylene cycanohydrin's production and use as a chemical intermediate and a solvent(1) may result in its release to the environment through various waste streams(SRC).
Environmental BiodegradationAEROBIC: Ethylene cyanohydrin is confirmed to be biodegradable according to the standard test of the Japanese Ministry of Industry and Trade (MITI) that employs a mixed inoculum obtained from freshwater, soil, and sludge(1).
Carcinogen ClassificationNo indication of carcinogenicity to humans (not listed by IARC).

Regulatory information

FDA RequirementsEthylene cyanohydrin is an indirect food additive for use only as a component of adhesives.
RCRA Requirements · 1 item

D003; A solid waste containing a cyanide cmpd may become characterized as a hazardous waste when subjected to testing for reactivity as stipulated in 40 CFR 261.23, and if so characterized, must be managed as a hazardous waste. ... Cyanide bearing waste which, when exposed to pH conditions between 2 and 12.5, can generate toxic gases, vapors or fumes in a quantity sufficient to present a danger to human health or the environment. /Cyanide cmpd/

Safety data

F
8-10
PPE
Eyeshields, Gloves, type ABEK (EN14387) respirator filter
wgk
1
tsca
TSCA listed
rtecs
MU5250000
ridadr
2810
hs_code
29269095
Toxicity
LD50 orally in rats: 10.0 g/kg (Smyth, Carpenter)
risk_code
36/37/38
Signal word
Warning
Symbol(GHS)
GHS07,GHS08
hazard_code
Xi
hazard_note
Irritant
safety_code
26-36-24/25
Storage Class
10 - Combustible liquids
Hazard statements
H315-H319-H373-H303-H335
REACH Registrations
Active
Autoignition Temperature
922 °F
Precautionary statements
P261-P280a-P304+P340-P305+P351+P338-P405-P501a-P260-P264-P280-P302+P352+P332+P313+P362+P364-P305+P351+P338+P337+P313-P314-P501
Hazardous Substances Data
109-78-4(Hazardous Substances Data)

UsesSolvent for some cellulose esters and many inorganic salts.

Uses3-Hydroxypropionitrile has been used as polar solvent to investigate the orientation of the phospholipid at the surface of the polar solvents by neutral impact collision ion scattering spectroscopy and as a reagent for carboxyl protection in peptide synthesis. It has been used also in solid state composite electrolyte for dye-sensitized solar cells.

Uses3-Hydroxypropionitrile has been used:as polar solvent to investigate the orientation of the phospholipid at the surface of the polar solvents by neutral impact collision ion scattering spectroscopyin solid state composite electrolyte for dye-sensitized solar cellsas a reagent for carboxyl protection in peptide synthesis

General DescriptionColorless to yellow-brown liquid with a weak odor. Sinks and mixes with water.

Upstream & downstream products

Upstream raw materials

2-ChloroethanolSodium cyanidePropanenitrile, 3-[2,2,2-trimethyl-1,1-bis(trimethylsilyl)disilanyl]-DL-HomoserineMethyl cyanoacetate

Downstream products

tert-Butyl 3-hydroxypropionateN-MethyldiethanolamineDirect Yellow 86Reactive Blue 74Butyl acrylate3-Hydroxypropionic acid3-Bromopropionic acidEthyl acrylatePoly(acrylic acid)3-Bromopropionitrile2-Cyanoethyl N,N,N',N'-tetraisopropylphosphorodiamidite3-Phenoxypropionitrile3,3'-Thiodipropionitrile2-Cyanoethyl ether2-Cyanoethyl acrylate3-(4-Morpholino)propionitrile