HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Compound

N-(2-Hydroxyethyl)ethylenediamine

HCID 8112
New reaction
Print
Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
111-41-1
Standard SMILES
NCCNCCO
InChIKey
LHIJANUOQQMGNT-UHFFFAOYSA-N
Molecular formula
C4H12N2O
Average molar mass
104.15 g/mol
Monoisotopic mass
104.09496301

Overview

Aminoethylethanolamine appears as a clear colorless liquid with an ammonia-like odor. Corrosive to tissue. Combustible, but may be difficult to ignite. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used to make other chemicals.

Names & identifiers

Preferred name
N-(2-Hydroxyethyl)ethylenediamine
IUPAC
2-(2-aminoethylamino)ethanol
English name
2-(2-Aminoethylamino)ethanol
Molecular formula
C4H12N2O
Molecular weight
104.15

Names & synonyms

N-(2-Hydroxyethyl)ethylenediaminemonoethanol ethylenediamineRefChem:112035111-41-12-(2-Aminoethylamino)ethanolAminoethylethanolamine2-((2-Aminoethyl)amino)ethanolN-(Hydroxyethyl)ethylenediamineN-(2-Aminoethyl)ethanolamineN-(Aminoethyl)ethanolamine(2-Hydroxyethyl)ethylenediamine(2-Aminoethyl)ethanolamine
Show more names
AEEA2-((2-Aminoethyl)amino)ethan-1-olAMINOETHYLETHANOLAMINaminoethylN-AMINOETHYL ETHANOLAMINEN-(2-Hydroxyethyl)-1,2-ethanediamine
Ethanolethylene diamineEthanol, 2-[(2-aminoethyl)amino]-Monoethanolethylenediamine2-[(2-Aminoethyl)amino]ethanolN-Hydroxyethyl-1,2-ethanediamineN-Hydroxyethylethylenediamine2-[(2-aminoethyl)amino]ethan-1-olDTXSID7025423

Database identifiers

CAS
111-41-1
PubChem CID
8112

Properties

Computed structural properties

XLogP
-1.7
Topological polar surface area
58.3 Ų
Hydrogen bond donors
3
Hydrogen bond acceptors
3
Rotatable bonds
4
Heavy atoms
7
Formal charge
0
Complexity
32.9

Experimental & physicochemical properties

Chemical Classes · 2 items

Nitrogen Compounds -> Ethanolamines

Corrosives

SpringerMaterials PropertiesBoiling point
OdorMILD AMMONIACAL ODOR
Density · 4 items

1.028 at 77 °F (USCG, 1999) - Denser than water; will sink

1.0254 at 25 °C

1.028

1.03 @25 °C

Color/FormCOLORLESS LIQ
Solubility · 2 items

greater than or equal to 100 mg/mL at 70 °F (NTP, 1992)

VERY SOL IN WATER, ALCOHOL, ACETATE

Flash Point · 4 items

216 °F (NTP, 1992)

132 °C

132 °C (CLOSED CUP)

216 °F

Boiling Point · 5 items

460 to 464 °F at 760 mmHg (NTP, 1992)

238-40 °C

BP: 243.7 °C

460-464 °F

243 °C @760 [mm Hg]

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 6 items

Danger

H314: Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]

P203, P260, P261, P264, P272, P280, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P318, P321, P333+P317, P362+P364, P363, P405, and P501 (click each P-code to see the statement)

Danger

H290 (13.6%): May be corrosive to metals [Warning Corrosive to Metals]

P203, P234, P260, P261, P264, P264+P265, P271, P272, P280, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P317, P318, P319, P321, P333+P317, P362+P364, P363, P390, P403+P233, P405, P406, and P501 (click each P-code to see the statement)

Hazard information

Regulatory Information · 6 items

Chemical: Ethanol, 2-[(2-aminoethyl)amino]-

Hazard Traits - Reproductive Toxicity

Regulation (EC) No 1935/2004 (amended)

Ethanol, 2-[(2-aminoethyl)amino]- is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Ethanol, 2-[(2-aminoethyl)amino]- are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

REACH registered substance: 2-(2-aminoethylamino)ethanol (EC: 203-867-5)

2-(2-Aminoethylamino) ethanol: Does not have an individual approval but may be used under an appropriate group standard

Other Safety InformationIMAP assessments - Ethanol, 2-[(2-aminoethyl)amino]-: Environment tier I assessment
DOT LabelCorrosive
Fire HazardsThis chemical is combustible. (NTP, 1992)
Fire Potential

Chemistry & industry

Uses & manufacturing

Uses · 4 items

Used as a chemical intermediate, textile finishing compound, and additive to oils in metal cutting; [HSDB] Occupational asthma reported in solderer and cable jointer; [Malo]

Metal Machining [Category: Heat or Machine]

CHEM INT FOR CHELATING AGENTS, DETERGENTS & EMULSIFIERS, CORROSION INHIBITORS, MINING CHEMICALS, GASOLINE STABILIZERS, DYEING ASSISTANTS, MODIFYING AGENTS (TEXTILES), 2,4-D HERBICIDE SALTS, OILS USED IN TEXTILE PROCESSING, OILS USED IN METAL CUTTING, AND GAS PROCESSING CHEMICALS

TEXTILE FINISHING CMPD (ANTIFUMING AGENTS, DYESTUFFS, CATIONIC SURFACTANTS); RESINS, RUBBER PRODUCTS; INSECTICIDES, CERTAIN MEDICINALS

U.S. Production · 3 items

2023: 10,000,000 - <50,000,000 lb

(1972) 3.99X10+9 G

(1976) 4.90X10+9 G (SALES)

Industry UsesIntermediate
Methods of ManufacturingREACTION OF ETHYLENEDIAMINE AND ETHYLENE OXIDE
Household ProductsInformation on 2 consumer products that contain Aminoethyl ethanolamine in the following categories is provided:
General Manufacturing Information · 2 items

All Other Chemical Product and Preparation Manufacturing

Ethanol, 2-[(2-aminoethyl)amino]-: ACTIVE

Applications · 5 items

DescriptionAminoethylethanolamine is a component of colophony in soldering flux, which may cause contact and airborne contact dermatitis in workers in the electronic industry or in cable jointers.

UsesTextile finishing compounds (antifuming agents, dyestuffs, cationic surfactants), resins, rubber products, insecticides, and certain medicinals.

It is used as an important intermediate in the manufacture of lube oil additives, fuel additives, chelating agents, surfactants and fabric softeners among other applications. N-(2-Hydroxyethyl)ethylenediamine [N-(2-Aminoethyl)ethanolamine] is used to study the aerobic biodecomposition of amines in hypersaline wastewaters.

Related reactions

60 records
New reaction record
HRID 67669 reaction equation
HRID 67669As reactant
HRID 67670 reaction equation
HRID 67670As reactant
HRID 67682 reaction equation
HRID 67682As reactant
HRID 92151 reaction equation
HRID 92151As reactant
HRID 256540 reaction equation
HRID 256540As reactant
HRID 259193 reaction equation
HRID 259193As reactant
HRID 268552 reaction equation
HRID 268552As reactant
HRID 268554 reaction equation
HRID 268554As reactant
PreviousPage 1 of 8

Compound notes

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
DTXSID
DTXSID7025423
ChEMBL
CHEMBL3186403
UNII
RC78W6NPXT
EC Number
203-867-5
Nikkaji
J1.188F
Melting Point-33 °C
Vapor Density · 3 items

3.59 (NTP, 1992) - Heavier than air; will sink (Relative to Air)

3.59

3.59

Vapor Pressure · 5 items

less than 0.01 mmHg at 68 °F (NTP, 1992)

0.000819 [mmHg]

8.19X10-4 mm Hg at 25 °C

<0.01 mmHg

0.01 [mm Hg] @20 °C

Food Contact Substances · 2 items

FCS -> FDA Inventory of Food Contact Substances Listed in 21 CFR

FCS -> FDA Inventory of Effective Food Contact Substance (FCS) Notifications

Physicochemical properties

Melting point
28 °C · −28 °C (−18 °F; 245 K)
Boiling point
243 °C · 243 °C (469 °F; 516 K)
Density
1.03 g/cm3 · 1.03 g/cm3
vapor density
3.6 · 3.6 (vs air)
vapor pressure
0.01 hPa · <0.01 hPa (20 °C)
refractive index
1.49 · 1.49
Flash point
132 °C · 132 °C (270 °F; 405 K)
storage temp.
30 °C · Store below +30°C.
solubility
soluble
pka
1 · pK1:7.21(+2);pK2:10.12(+1) (25°C)
form
clear liquid
color
Colorless to Light yellow
PH
11.8 · 11.8 (111g/l, H2O, 20℃)
Odor
mild ammoniacal odor
explosive limit
3.3 · 3.3-10.1%(V)
Water Solubility
soluble
Sensitive
Hygroscopic
BRN
506012 · 506012
Henry's Law Constant
9 · 9.0×107 mol/(m3Pa) at 25℃, HSDB (2015)
Dielectric constant
18.99 · 18.989999999999998
Exposure limits
0.1 mg/m3 · NIOSH: TWA 0.1 mg/m3
InChI
1S/C4H12N2O/c5-1-2-6-3-4-7/h6-7H,1-5H2
InChIKey
LHIJANUOQQMGNT-UHFFFAOYSA-N
SMILES
NCCNCCO
LogP
-2.2 · -2.2--1.46 at 20-25℃ and pH7-11
Surface tension
67.11 mN/m · 67.11mN/m at 1g/L and 20℃
Dissociation constant
6.83 · 6.83-9.82 at 25℃
CAS DataBase Reference
111 · 111-41-1(CAS DataBase Reference)
FDA 21 CFR
175.105 · 175.105
Indirect Additives used in Food Contact Substances
2 · 2-((2-AMINOETHYL)AMINO)ETHANOL
FDA UNII
78 W6NPXT · RC78W6NPXT
NIST Chemistry Reference
2 · Ethanol, 2-[(2-aminoethyl)amino]-(111-41-1)
EPA Substance Registry System
N-Hydroxyethylethylenediamine (111-41-1)
UNSPSC Code
12352116 · 12352116
NACRES
22 · NA.22
Symbol(GHS)
5 · GHS05,GHS07,GHS08
Signal word
Danger
Hazard statements
314 · H314-H317-H335-H360Df
Precautionary statements
202 · P202-P261-P280-P303+P361+P353-P304+P340+P310-P305+P351+P338
target organs
Respiratory system
Hazard Codes
C,T
Risk Statements
34 · 34-43-61-62
Safety Statements
26 · 26-36/37/39-45-53-28A
RIDADR
2735 · UN 2735 8/PG 2
WGK Germany
1 · 1
RTECS
6300000 · KJ6300000
Autoignition Temperature
345 °C · 345 °C
TSCA
TSCA listed
HazardClass
8 · 8
PackingGroup
II
HS Code
2922199090 · 2922199090
Storage Class
6.1 C · 6.1C - Combustible acute toxic Cat.3toxic compounds or compounds which causing chronic effects
Hazard Classifications
1 Repr · Eye Dam. 1Repr. 1BSkin Corr. 1BSkin Sens. 1STOT SE 3
Hazardous Substances Data
111 · 111-41-1(Hazardous Substances Data)
Toxicity
50 orally · LD50 orally in Rabbit: 3000 mg/kg LD50 dermal Rabbit > 2000 mg/kg
REACH Registrations
Active
Limited Quantities
1 L · 1.0 L (0.3 gallons) (liquid) or 1 Kg (2.2 lbs) (solid)
Excepted Quantities
Max Inner Pack (30g or 30ml) and Max Outer Pack (500g or 500ml)
MODERATE, WHEN EXPOSED TO HEAT OR FLAME ...
Health HazardsSkin contact will cause mild irritation; eye contact will cause more severe irritation. (USCG, 1999)
Hazards Summary · 1 item

Liquid causes second degree burns after contact for a few minutes. [CHRIS] A mild irritant to the skin and a severe irritant to the eyes; [CAMEO] Aminoethylethanolamine-based fluxes are skin sensitizers; they are commonly used in the soldering of printed circuit boards. [Marks, p. 318] A lachrymator; [CHEMINFO]

Reactive GroupAlcohols and Polyols
Special ReportsPepys J; Allergy of the Respiratory Tract to Low Molecular Weight Chemical Agents; Handbook of Experimental Pharmacology p. 163-85 (1983).
Reactivity Profile · 1 item

AMINOETHYLETHANOLAMINE is an amine and alcohol. Amines are chemical bases. They neutralize acids to form salts plus water. These acid-base reactions are exothermic. The amount of heat that is evolved per mole of amine in a neutralization is largely independent of the strength of the amine as a base. Amines may be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen is generated by amines in combination with strong reducing agents, such as hydrides. This chemical is hygroscopic.

Atmospheric Standards · 1 item

This action promulgates standards of performance for equipment leaks of Volatile Organic Compounds (VOC) in the Synthetic Organic Chemical Manufacturing Industry (SOCMI). The intended effect of these standards is to require all newly constructed, modified, and reconstructed SOCMI process units to use the best demonstrated system of continuous emission reduction for equipment leaks of VOC, considering costs, non air quality health and environmental impact and energy requirements. Aminoethylethanolamine is produced, as an intermediate or a final product, by process units covered under this subpart.

Air and Water ReactionsWater soluble. Hygroscopic.

Safety & protection

Fire FightingExcerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]:
First Aid · 1 item

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

Fire Fighting Procedures · 2 items

ALCOHOL FOAM, MIST, DRY CHEMICAL ...

If material /is/ on fire or involved in /a/ fire do not extinguish fire unless flow can be stopped. Use water in flooding quantities as fog. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. Solid streams of water may be ineffective. Use "alcohol" foam, dry chemical or carbon dioxide.

Cleanup MethodsOverspread sufficient sodium bisulfate and sprinkle water. Drain into the sewer with abundant water.
Nonfire Spill ResponseExcerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]:
Disposal MethodsAminoethyl ethanolamine is a waste chemical stream constituent which may be subjected to ultimate disposal by controlled incineration.
Preventive Measures · 3 items

If material /is/ not on fire and not involved in /a/ fire keep sparks, flames, and other sources of ignition away. Keep material out of water sources and sewers. Build dikes to contain flow as necessary.

Avoid breathing vapors. Keep upwind. Avoid bodily contact with the material. ... Do not handle broken packages unless wearing appropriate personal protective equipment. Wash away any material which may have contacted the body with copious amounts of water or soap and water. ... If contact with the material anticipated, wear appropriate chemical protective clothing.

SRP: Contaminated protective clothing should be segregated in such a manner so that there is no direct personal contact by personnel who handle, dispose, or clean the clothing. Quality assurance to ascertain the completeness of the cleaning procedures should be implemented before the decontaminated protective clothing is returned for reuse by the workers. Contaminated clothing should not be taken home at end of shift, but should remain at employee's place of work for cleaning.

Isolation and EvacuationExcerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]:
Protective Action Criteria (PAC) · 3 items

9.0 [mg/m3]

99 [mg/m3]

590 [mg/m3]

Personal Protective Equipment (PPE) · 2 items

Goggles or face shield, protective clothing (USCG, 1999)

Wear butyl gloves, face shield or multipurpose gas mask, and coveralls.

Toxicology

Environmental Fate · 3 items

TERRESTRIAL FATE: The results of one biodegradation screening study have indicated that aminoethyl ethanolamine biodegrades readily(1); therefore, biodegradation may be an important transformation process in soil(SRC). Aminoethyl ethanolamine has a pKa of 7.21(2) that indicates it can exist in both the protonated and neutral forms in environmental media; neutral aminoethyl ethanolamine is expected to leach readily. However, the mobility of protonated aminoethyl ethanolamine in soil can not be predicted without additional experimental data(SRC).

AQUATIC FATE: The results of one biodegradation screening study have indicated that aminoethyl ethanolamine biodegrades readily(1); therefore, biodegradation may be an important transformation process in water. Aquatic bioconcentration and volatilization are not expected to be important because of the high solubility of aminoethyl ethanolamine(SRC).

ATMOSPHERIC FATE: Based upon a vapor pressure of 8.19X10-4 mm Hg at 25 °C(1), aminoethyl ethanolamine is expected to exist primarily in the vapor-phase in the ambient atmosphere(2,SRC). It will degrade rapidly in the atmosphere by the vapor-phase reaction with photochemically produced hydroxyl radicals with an estimated half-life of 3.3 hr(3,SRC). Aminoethyl ethanolamine is miscible with water(4), therefore, physical removal from air by wet deposition (dissolution in clouds, rainfall, etc) is possible(SRC).

Adverse EffectsDermatotoxin - Skin burns.
Soil Adsorption/Mobility · 1 item

Based upon an estimated log Kow of -1.39(1), the Koc for aminoethyl ethanolamine can be estimated to be 4.2 from applicable regression-derived equation(2,SRC). This estimated Koc value indicates that aminoethyl ethanolamin is very highly mobile in soil(3). Aminoethyl ethanolamine is miscible in water(4) which also indicates high soil mobility(SRC). However, aminoethyl ethanolamine has a pKa of 7.21(5) that indicates it can exist in both the protonated and neutral forms in environmental media; the Koc estimate above applies to neutral aminoethyl ethanolamine, but not to protonated aminoethyl ethanolamine(SRC). The mobility of protonated aminoethyl ethanolamine in soil can not be predicted without additional experimental data(SRC).

Human Toxicity Excerpts · 1 item

Soldering flux used in the electronics industry can cause both irritant and allergic contact dermatitis. Irritant dermatitis is more common than allergic contact dermatitis. Aminoethylethanolamine, a constituent of some fluxes, is a sensitizer. Dermatitis tends to start over the periungal area and spread to the finger shafts and sometimes the wrists. The use of cotton gloves by workers appeared to aggravate the problem.

Artificial Pollution SourcesSmall amounts of aminoethyl ethanolamine may be present in wastewater streams generated at sites of industrial manufacture and use as chemical intermediate(1,SRC).
Environmental BiodegradationAminoethyl ethanolamine was found to be easily biodegraded (greater than 30% theoretical BOD in two weeks of incubation) using the Japanese MITI protocol(1).
Environmental Bioconcentration · 1 item

Based upon an estimated log Kow of -1.39(1), the BCF for aminoethyl ethanolamine can be estimated to be 0.05 from a recommended regression-derived equation(2,SRC). This estimated BCF value indicates that bioconcentration in aquatic organisms is not important. Aminoethyl ethanolamine is miscible in water(3) which also indicates that bioconcentration is not important(SRC).

Volatilization from Water/Soil · 1 item

The Henry's Law constant for aminoethyl ethanolamine can be estimated to be 1.10X10-13 atm-cu m/mole using a structure estimation method(1,SRC). This value of Henry's Law constant indicates that aminoethyl ethanolamine is essential non-volatile from water(2); therefore, volatilization from water will not be important(SRC).

Non-Human Toxicity Excerpts... Tested by application of a drop to a rabbit's eye caused injury similar to that caused by acetone.
Environmental Abiotic Degradation · 1 item

The rate constant for the vapor-phase reaction of aminoethyl ethanolamine with photochemically produced hydroxyl radicals has been estimated to be 1.16X10-10 cu cm/molecule-sec at 25 °C which corresponds to an atmospheric half-life of about 3.3 hrs at an atmospheric concn of 5X10+5 hydroxyl radicals per cu cm(1,SRC).

Probable Routes of Human Exposure · 2 items

Occupational exposure to aminoethyl ethanolamine occurs through dermal contact(1).

NIOSH (NOES Survey 1981-1983) has statistically estimated that 7,385 workers are potentially exposed to aminoethyl ethanolamine in the USA(1). NIOSH (NOHS Survey 1972-1974) has statistically estimated that 1,558 workers are potentially exposed to aminoethyl ethanolamine in the USA(2).

Environmental Fate/Exposure Summary · 1 item

If released to the atmosphere, aminoethyl ethanolamine will exist primarily in the vapor-phase where it will degrade rapidly by reaction with photochemically produced hydroxyl radicals (estimated half-life of 3.3 hours). Physical removal from the atmosphere may be possible through wet deposition. If released to soil or water, aminoethyl ethanolamine will probably biodegrade. The results of one biodegradation screening study have indicated that aminoethyl ethanolamine biodegrades readily. Aminoethyl ethanolamine can exist in both the neutral and protonated forms in environmental media; the neutral form may leach readily; the mobility of the protonated form is not known. Occupational exposure occurs through skin contact. (SRC)

Regulatory information

Atmospheric Standards · 1 item

This action promulgates standards of performance for equipment leaks of Volatile Organic Compounds (VOC) in the Synthetic Organic Chemical Manufacturing Industry (SOCMI). The intended effect of these standards is to require all newly constructed, modified, and reconstructed SOCMI process units to use the best demonstrated system of continuous emission reduction for equipment leaks of VOC, considering costs, non air quality health and environmental impact and energy requirements. Aminoethylethanolamine is produced, as an intermediate or a final product, by process units covered under this subpart.

Safety data

wgk
1
tsca
TSCA listed
rtecs
KJ6300000
ridadr
UN 2735 8/PG 2
hs_code
2922199090
Toxicity
LD50 orally in Rabbit: 3000 mg/kg LD50 dermal Rabbit > 2000 mg/kg
risk_code
34-43-61-62
Signal word
Danger
Symbol(GHS)
GHS05,GHS07,GHS08
hazard_code
C,T
safety_code
26-36/37/39-45-53-28A
hazard_class
8
Storage Class
6.1C - Combustible acute toxic Cat.3toxic compounds or compounds which causing chronic effects
packing_group
II
target organs
Respiratory system
Hazard statements
H314-H317-H335-H360Df
Limited Quantities
1.0 L (0.3 gallons) (liquid) or 1 Kg (2.2 lbs) (solid)
Excepted Quantities
Max Inner Pack (30g or 30ml) and Max Outer Pack (500g or 500ml)
REACH Registrations
Active
Hazard Classifications
Eye Dam. 1Repr. 1BSkin Corr. 1BSkin Sens. 1STOT SE 3
Autoignition Temperature
345 °C
Precautionary statements
P202-P261-P280-P303+P361+P353-P304+P340+P310-P305+P351+P338
Hazardous Substances Data
111-41-1(Hazardous Substances Data)
Uses

UsesN-(2-hydroxyethyl)ethylenediamine (hydeten) or [N-(2-aminoethyl)ethanolamine] can be used as: A precursor in the synthesis of room-temperature ionic liquids, acetate and formate ammonium salts of N-(2-hydroxyethyl)-ethylenediamine.A ligand in the preparation of polymeric cyano-bridged platinum(II)complexes, ligand-copper(II)carbohydrate complexes and cyano-bridged Ni-Pt and Cu-Pt coordination polymers.It can also be used to study the aerobic biodecomposition of amines in hypersaline wastewaters.

General DescriptionA clear colorless liquid with an ammonia-like odor. Corrosive to tissue. Combustible, but may be difficult to ignite. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used to make other chemicals.

Upstream & downstream products

Upstream raw materials

Ethylenediamine

Downstream products

castor oil type amphoteric surfactant JHZ-103cocoyl coarboxy methyl imidazoline acetat XCG-CA-2 typelauroamphopropyl sulfonateSilk softener Llaurylamide propionate JHZ-101N,N'-Dimethylpiperazine1,4-DiethylpiperazinePiperazine dihydrochloride1-(2-Hydroxyethyl)-2-imidazolidinone1-(2-Aminoethyl)imidazolidin-2-oneN-Methyl-N-(N,N-dimethylaminoethyl)-aminoethanol2,2,2-Trifluoro-N-(2-(2-hydroxyethylamino)ethyl)acetamidetert-Butyl (2-((tert-butoxycarbonyl)amino)ethyl)(2-hydroxyethyl)carbamate