HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Compound

Propyl ether

HCID 8114
New reaction
Print

Completing data — refresh the page later to see the latest

Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
111-43-3
Standard SMILES
CCCOCCC
InChIKey
POLCUAVZOMRGSN-UHFFFAOYSA-N
Molecular formula
C6H14O
Average molar mass
102.17 g/mol
Monoisotopic mass
102.10446507

Overview

Di-n-propyl ether appears as a colorless liquid with a strong odor. Less dense than water and slightly soluble in water. Vapors are heavier than air. In high concentrations the vapors may be narcotic.

Names & identifiers

Preferred name
Propyl ether
IUPAC
1-propoxypropane
English name
n-Propyl ether
Molecular formula
C6H14O
Molecular weight
102.17

Names & synonyms

Dipropyl etherPROPYL ETHERn-Propyl ether111-43-3Dipropyl oxide4-OxaheptanePropane, 1,1'-oxybis-1,1'-OxybispropaneEther, di-n-propyl-DTXSID8042343UN238442Q250HS4G
Show more names
(n-C3H7)2Odipropyloxidep-Propyletherether,dipropyl
1,1'-OXYBIS(PROPANE)DTXCID6022343UN-23841,1'-Oxybis[propane]RefChem:134842203-869-6Di-n-propyl ether1-Propoxypropane

Database identifiers

CAS
111-43-3
PubChem CID
8114
DTXSID
DTXSID8042343
ChEMBL
CHEMBL3187166
UNII
42Q250HS4G
EC Number
203-869-6
Nikkaji
J5.109H

Properties

Computed structural propertiesFilling in

XLogP
2
Topological polar surface area
9.2 Ų
Hydrogen bond donors
0
Hydrogen bond acceptors
1
Rotatable bonds
4
Heavy atoms
7
Formal charge
0
Complexity
23.4

Experimental & physicochemical properties

Chemical ClassesFlammable agents - 3rd degree
SolventsSolvents -> Ethers (<C12)
SpringerMaterials PropertiesSchoenflies notation
LogP · 3 items

log Kow = 2.03

2.03

2.03

Density · 2 items

0.7466 at 20 °C/4 °C

Relative density (water = 1): 0.7

Color/FormMobile liquid
Solubility · 3 items

Soluble in alcohol, ether

In water, 4.9X10+3 mg/L at 25 °C

Solubility in water, g/100ml at 25 °C: 0.25

Flash Point · 3 items

70 °F (NFPA, 2010)

70 °F (21 °C) (Closed cup)

21 °C c.c.

Boiling Point · 2 items

89-91 °C

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 6 items

Danger

H225: Highly Flammable liquid and vapor [Danger Flammable liquids]

P210, P233, P240, P241, P242, P243, P261, P271, P280, P303+P361+P353, P304+P340, P319, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement)

Danger

H225 (100%): Highly Flammable liquid and vapor [Danger Flammable liquids]

P210, P233, P240, P241, P242, P243, P261, P271, P280, P303+P361+P353, P304+P340, P319, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement)

Hazard information

Regulatory Information · 5 items

Chemical: Propane, 1,1'-oxybis-

Propane, 1,1'-oxybis- is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Propane, 1,1'-oxybis- are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

REACH registered substance: Dipropyl ether (EC: 203-869-6)

Propane, 1,1'-oxybis-: HSNO Approval: HSR001139 Approved with controls

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

DOT LabelFlammable Liquid
Fire Hazards · 3 items

Excerpt from ERG Guide 127 [Flammable Liquids (Water-Miscible)]:

· HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

Flammable. Above 21 °C explosive vapour/air mixtures may be formed.

Fire Potential · 3 items

EXTREMELY FLAMMABLE.

A flammable liquid and dangerous fire hazard when exposed to heat, flame, or oxidizers.

Chemistry & industry

Uses & manufacturing

Uses · 2 items

Used as a solvent and chemical intermediate; [HSDB]

Propyl ether can be used for the same purposes as diethyl ether.

U.S. Production · 3 items

2023: 50,000 - <250,000 lb

(1977) NOT PRODUCED COMMERCIALLY IN USA

(1979) NOT PRODUCED COMMERCIALLY IN USA

Industry UsesIntermediate
Methods of Manufacturing · 2 items

Di-n-propyl ether can be prepared from 1-propanol by dehydration with sulfuric acid.

Obtained by heating propyl alcohol with benzenesulfonic acid.

General Manufacturing Information · 2 items

All Other Basic Organic Chemical Manufacturing

Propane, 1,1'-oxybis-: ACTIVE

Applications

UsesDi-n-propyl ether, is used as a solvent and intermediate for organic chemical synthesis.

General DescriptionA colorless liquid with a strong odor. Less dense than water and slightly soluble in water. Flash point of 70°F. Vapors are heavier than air. In high concentrations the vapors may be narcotic.

Upstream & downstream products

Downstream products

CisaprideEthyl(5,10,15,20-tetra(2,4,6-trimethylphenyl)porphyrinato)rhodium(III)5-Propoxymethyl-furan-2-carbaldehyde

Related reactions

10 records
New reaction record
HRID 158258 reaction equation
HRID 158258As reactant
HRID 235670 reaction equation
HRID 235670As product
HRID 1019232 reaction equation
HRID 1019232As solvent
HRID 1385311 reaction equation
HRID 1385311As solvent
HRID 1774244 reaction equation
HRID 1774244As product
HRID 1888018 reaction equation
HRID 1888018As reactant
HRID 1888062 reaction equation
HRID 1888062As reactant
HRID 1888064 reaction equation
HRID 1888064As reactant
PreviousPage 1 of 2

Compound notes

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes

88-90 °C

DecompositionWhen heated to decomposition it emits acrid smoke and irritating fumes.
Melting Point · 2 items

-122 °C

-122 °C

Vapor Density · 2 items

3.53 (Air =1)

Relative vapor density (air = 1): 3.53

Physicochemical properties

Melting point
-123 °C · -123 °C
Boiling point
88 · 88-90 °C(lit.)
Density
0.736 g/mL · 0.736 g/mL at 25 °C(lit.)
vapor pressure
55 mm · 55 mm Hg ( 20 °C)
refractive index
20 · n20/D 1.380(lit.)
Flash point
40 °F · 40 °F
storage temp.
Flammables area
solubility
2 O: · H2O: slightly soluble
form
Liquid
color
Clear colorless
Water Solubility
3 g/L · It is slightly soluble in water 3 g/L (20°C), soluble in alcohol and ether.
Specific Heat Capacity
2.17 J/ · Cp(liquid): 2.17 J/(g·K), at 25℃
Thermal Conductivity
0.13 W/ · 0.13 W/(m·K) at 25 ℃
Merck
14 · 14,7857
BRN
1731312 · 1731312
Henry's Law Constant
2.9 · 2.9×10-3 mol/(m3Pa) at 25℃, Brockbank (2013)
Dielectric constant
3.4 · 3.4(26℃)
InChI
1S/C6H14O/c1-3-5-7-6-4-2/h3-6H2,1-2H3
InChIKey
POLCUAVZOMRGSN-UHFFFAOYSA-N
SMILES
CCCOCCC
CAS DataBase Reference
111 · 111-43-3(CAS DataBase Reference)
EWG's Food Scores
1 · 1
FDA UNII
42 Q250HS4G · 42Q250HS4G
EPA Substance Registry System
Propyl ether (111-43-3)
UNSPSC Code
12352100 · 12352100
NACRES
22 · NA.22
Symbol(GHS)
2 · GHS02,GHS07
Signal word
Danger
Hazard statements
335 · H335-H336-H225
Precautionary statements
501 · P501-P261-P240-P210-P233-P243-P241-P242-P271-P280-P370+P378-P303+P361+P353-P304+P340+P312-P403+P233-P403+P235-P405
target organs
Central nervous system
PPE
Eyeshields, Faceshields, Gloves, type ABEK (EN14387) respirator filter
Hazard Codes
F
Risk Statements
11 · 11-19-66-67
Safety Statements
9 · 9-16-29-33
RIDADR
2384 · UN 2384
WGK Germany
1 · 1
RTECS
5125000 · UJ5125000
TSCA
TSCA listed
HazardClass
3 · 3
PackingGroup
II
HS Code
29091990 · 29091990
Storage Class
3 · 3 - Flammable liquids
Hazard Classifications
2 STOT · Flam. Liq. 2STOT SE 3
Hazardous Substances Data
111 · 111-43-3(Hazardous Substances Data)
REACH Registrations
Active

ONLY ELECTRICAL EQUIPMENT OF EXPLOSION-PROOF TYPE (GROUP C CLASSIFICATION) IS PERMITTED TO BE OPERATED IN ETHER AREAS. ETHER SHOULD NOT BE STORED NEAR POWERFUL OXIDIZERS OR IN AREAS OF HIGH FIRE HAZARD. /ETHERS/

Health Hazards · 2 items

Excerpt from ERG Guide 127 [Flammable Liquids (Water-Miscible)]:

· Inhalation or contact with material may irritate or burn skin and eyes.

Hazards SummaryHas anesthetic effects; [ICSC]
DOT ID and Guide2384 127
Reactive GroupEthers
EC ClassificationSymbol: F; R: 11-19-66-67; S: (2)-9-16-29-33; Note: C
UN ClassificationUN Hazard Class: 3; UN Pack Group: II
Reactivity AlertsHighly Flammable
Reactivity Profile · 1 item

Ethers, such as DI-N-PROPYL ETHER, can act as bases. They form salts with strong acids and addition complexes with Lewis acids. The complex between diethyl ether and boron trifluoride is an example. Ethers may react violently with strong oxidizing agents. In other reactions, which typically involve the breaking of the carbon-oxygen bond, ethers are relatively inert.

Safety & protection

Fire Fighting · 2 items

Excerpt from ERG Guide 127 [Flammable Liquids (Water-Miscible)]:

Use foam, dry powder, carbon dioxide. NO water. In case of fire: keep drums, etc., cool by spraying with water.

First Aid Measures · 4 items

Fresh air, rest. Refer for medical attention.

Remove contaminated clothes. Rinse and then wash skin with water and soap.

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

Rinse mouth.

Accidental Release Measures · 2 items

· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.

· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.

First Aid · 2 items

Excerpt from ERG Guide 127 [Flammable Liquids (Water-Miscible)]:

General First Aid:

Safe StorageFireproof. Cool. Keep in the dark.
Exposure Control and Personal Protection· Wear positive pressure self-contained breathing apparatus (SCBA).
Fire Fighting Procedures · 1 item

If material on fire or involved in fire: Use water in flooding quantities as fog. Solid streams of water may be ineffective Use "alcohol" foam, dry chemical or carbon dioxide. Cool all affected containers with flooding quantities of water. Do not extinguish fire unless flow can be stopped. Apply water from as far a distance as possible. Keep run-off water out of sewers and water sources.

Storage ConditionsFireproof. Cool. Keep in the dark.
Cleanup Methods · 1 item

Cover the spilled material with dry earth, sand or other non-combustible material. Collect leaking liquid in sealable containers. Remove all ignition sources. Ventilation. Do NOT wash /spill/ away ... (Extra personal protection: filter respirator for organic gases and vapors.)

Nonfire Spill ResponseExcerpt from ERG Guide 127 [Flammable Liquids (Water-Miscible)]:
Disposal Methods · 2 items

SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational exposure or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal, aquatic, and plant life; and conformance with environmental and public health regulations./

This compound should be susceptible to removal from waste water by air stripping. /Bis(2-chloroethyl)ether/

Spillage Disposal · 1 item

Personal protection: filter respirator for organic gases and vapours adapted to the airborne concentration of the substance. Ventilation. Remove all ignition sources. Do NOT wash away into sewer. Cover the spilled material with dry earth, sand or other non-combustible material. Collect leaking and spilled liquid in sealable containers as far as possible.

Toxicology

Environmental Fate · 3 items

TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 15(SRC), determined from a structure estimation method(2), indicates that propyl ether is expected to have very high mobility in soil(SRC). Volatilization of dipropyl ether from moist soil surfaces is expected to be an important fate process(SRC) given a Henry's Law constant of 2.2X10-3 atm-cu m/mole(3). Volatilization of dipropyl ether from dry soil surfaces is expected(SRC) based upon a vapor pressure of 62.5 mm Hg(4). Limited biodegradation data(5,6) suggest that dipropyl ether may be biodegraded in soil if acclimated microbial populations are present(SRC).

AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 15(SRC), determined from a structure estimation method(2), indicates that propyl ether is not expected to adsorb to suspended solids and sediment in the water column(SRC). Dipropyl ether is expected to volatilize from water surfaces(3) based on a Henry's Law constant of 2.2X10-3 atm-cu m/mole(4). Using this Henry's Law constant and an estimation method(3), estimated volatilization half-lives for a model river and model lake are 3.6 hours and 4.1 days, respectively(SRC). According to a classification scheme(5), an estimated BCF of 7(SRC), from log Kow of 2.03(6), and a regression derived equation(7), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Following a lag period of 13 days, dipropyl ether reached 63% of its theoretical BOD after 25 days incubation in an activated sludge aqueous screening study(8). In another activated sludge screening test dipropyl ether did not biodegrade in 240 hours(9).

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), dipropyl ether, which has a vapor pressure of 62.5 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase dipropyl ether is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals and nitrate radicals(SRC); half-lives for these reactions in air are estimated to be 21 hours and 4.9 days, respectively(3,4). Direct photolysis is not expected to be an important removal process since aliphatic ethers do not absorb light in the environmental UV spectrum(5).

Adverse EffectsNeurotoxin - Acute solvent syndrome
Exposure RoutesThe substance can be absorbed into the body by inhalation.
Signs and Symptoms · 3 items

Cough. Sore throat. Dizziness. Headache.

Redness. Pain. Dry skin.

Redness. Pain.

Soil Adsorption/Mobility · 1 item

Using a structure estimation method based on molecular connectivity indices(1), the Koc for dipropyl ether can be estimated to be about 15(SRC). According to a classification scheme(2), this estimated Koc value suggests that dipropyl ether is expected to have very high mobility in soil(SRC).

Artificial Pollution SourcesDipropyl ether can be used for the same purposes as diethyl ether(1), which is used primarily as a solvent(2). Dipropyl ether's use as a solvent may result in its release to the environment through various waste streams(SRC).
Environmental Biodegradation · 2 items

AEROBIC: An activated sludge aqueous screening study found that dipropyl ether was biodegraded quickly after a 13 day lag period with a 63% theoretical biological oxygen demand being measured after 25 days incubation(1). In another activated sludge screening test dipropyl ether was not biodegraded within 240 hours(2). Many ethers are known to be resistant to biodegradation(3).

ANAEROBIC: 0% loss of dipropyl ether was observed in landfill leachate impacted aquifer slurries amended with sulfate or nitrate after 244 and 85 days incubation, respectively(1). Dipropyl ether was not biodegraded in aquifer slurries prepared from the methanogenic portion of a shallow anoxic aquifer polluted by municipal landfill leachate(2).

Environmental Bioconcentration · 1 item

An estimated BCF of 7 was calculated for dipropyl ether(SRC), using a log Kow of 2.03(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low.

Volatilization from Water/Soil · 1 item

The Henry's Law constant for dipropyl ether is 2.2X10-3 atm-cu m/mole(1). This Henry's Law constant indicates that dipropyl ether is expected to volatilize from water surfaces(2). Based on this Henry's Law constant, the estimated volatilization half-life from a model river (1 m deep, flowing 1 m/sec, wind velocity of 3 m/sec)(2) is approximately 3.4 hours(SRC). The estimated volatilization half-life from a model lake (1 m deep, flowing 0.05 m/sec, wind velocity of 0.5 m/sec)(2) is approximately 4.1 days(SRC). Dipropyl ether's Henry's Law constant(1) indicates that volatilization from moist soil surfaces may occur(SRC). Volatilization of dipropyl ether from dry soil surfaces is expected(SRC) based upon a vapor pressure of 62.5 mm Hg(3).

Non-Human Toxicity Excerpts · 2 items

/LABORATORY ANIMALS: Acute Exposure/ The sensory irritating response of propyl ether (PE) on respiratory rate was measured in mice. Male CF-1-mice were anesthetized and allowed to recover before exposure. In the first experiment, the irritating effect of airborn chemicals on the trigeminal nerve ends was investigated by observing for reflex induced decrease in the respiratory rate and for the characteristic respiratory patterns. In the second study, the effect on the vagus nerve was investigated by observing for reflex induced decrease in the respiratory rate and for the respiratory patterns. PE was delivered at a rate from 2,400 to 60,000 ppm in an exposure chamber. Each animal was placed in a body plethysmograph attached to the exposure chamber whereby the head protruded from the chamber. The respiratory pattern of each animal was displayed on an oscillograph. Concentration response relationships were obtained by plotting the percentage decrease in the average respiratory rate of each group; from these relationships the concentration expected to cause a 50% decrease in respiratory rate (RD50) due to sensory irritation was estimated. At a concentration of 15,000 ppm or less, the sensory irritation response disappeared after approximately 1 min. The average respiratory rate also decreased within the first minute. For the sensory irritation response the threshold and the RD50 were about 620 and 89,000 ppm, respectively; the sensory irritating concentration needed to depress the respiratory rate to 50% could not be reached with saturated vapor at 20 °C. At concentrations >15,000 ppm, the sensory irritation response disappeared within 30 sec and was replaced with patterns characteristic for pulmonary irritation or anesthesia. ...

/LABORATORY ANIMALS: Acute Exposure/ The effects of propyl-ether(PE) on pulmonary irritation and anesthesia were investigated in mice. Each animal was placed in a body plethysmograph attached to the exposure chamber so that the head of the animal protruded into the chamber. The change in tidal volume was obtained from a 10 sec sample once every 1, 2, 5, or 10 min. The respiratory pattern of each animal was displayed on an oscillograph, and the average respiratory rate of each group of four mice was continuously displayed. Exposure to PE was for 30 or 240 min followed by 20 min of recovery. Changes in tidal volume were calculated from the first 10 sec in every experiment. Four mice were given pentobarbitol anesthesia ip and observed on the plethysmograph for the next 240 min; changes in tidal volume were obtained from a 10 sec sample every 10 min. The anesthetic effect of PE was revealed by observing escape activity (body movement) of the mice in the plethysmograph and observing absence of righting reflex at the end of the recovery period. Distinction between changes in respiratory rate and tidal volume due to anesthesia or pulmonary irritation was obtained by comparison of the responses at equal anesthesia concentrations caused by propyl-ether and pentobarbital. After cessation of the sensory irritation response, a mixed response due to pulmonary irritation and anesthesia appeared, resulting in a decrease in respiratory rate and tidal volume. In cannulated mice the decrease in respiratory rate was introduced more slowly. Shortly after injection of pentobarbitol, the respiratory rate decreased in a dose dependent manner; the maximum decrease was found within 10 to 60 minutes. All mice given pentobarbital lost righting reflex at 35 and 50 mg/kg. ...

Environmental Abiotic Degradation · 1 item

The rate constant for the vapor-phase reaction of dipropyl ether with photochemically-produced hydroxyl radicals is 1.85X10-11 cu cm/molecule-sec at 25 °C(1). This rate constant corresponds to an atmospheric half-life of about 21 hours at an atmospheric concentration of 5X10+5 hydroxyl radicals per cu cm(SRC). Direct photolysis is not expected to be an important removal process since aliphatic ethers do not absorb light in the environmental spectrum(2). The rate constant for the reaction of dipropyl ether with nitrate radicals is 6.49X10-15 cu cm/molecule-sec at 22 °C(3). This corresponds to an atmospheric half-life of about 4.9 days at an average atmospheric concentration of 5X10+8 nitrate radicals per cu cm(4). Dipropyl ether is not expected to undergo hydrolysis in the environment due to the lack of hydrolyzable functional groups(5).

Probable Routes of Human ExposureOccupational exposure to dipropyl ether may occur through inhalation and dermal contact with this compound at workplaces where dipropyl ether is used. (SRC)

Safety data

PPE
Eyeshields, Faceshields, Gloves, type ABEK (EN14387) respirator filter
wgk
1
tsca
TSCA listed
rtecs
UJ5125000
ridadr
UN 2384
hs_code
29091990
risk_code
11-19-66-67
Signal word
Danger
Symbol(GHS)
GHS02,GHS07
hazard_code
F
safety_code
9-16-29-33
hazard_class
3
Storage Class
3 - Flammable liquids
packing_group
II
target organs
Central nervous system
Hazard statements
H335-H336-H225
REACH Registrations
Active
Hazard Classifications
Flam. Liq. 2STOT SE 3
Precautionary statements
P501-P261-P240-P210-P233-P243-P241-P242-P271-P280-P370+P378-P303+P361+P353-P304+P340+P312-P403+P233-P403+P235-P405
Hazardous Substances Data
111-43-3(Hazardous Substances Data)