HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.1
  1. Home
  2. /Compound

Dimethyl terephthalate

HCID 8441
New reaction
Print

Completing data — refresh the page later to see the latest

Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
120-61-6
Standard SMILES
COC(=O)c1ccc(C(=O)OC)cc1
InChIKey
WOZVHXUHUFLZGK-UHFFFAOYSA-N
Molecular formula
C10H10O4
Average molar mass
194.18 g/mol
Monoisotopic mass
194.0579088

Overview

Dimethyl terephthalate appears as white solid or heated colorless liquid. Has no odor. Liquid solidifies in cool water. Solid and liquid sink in water. (USCG, 1999)

Names & identifiers

Preferred name
Dimethyl terephthalate
IUPAC
dimethyl benzene-1,4-dicarboxylate
English name
Dimethyl terephthalate
Molecular formula
C10H10O4
Molecular weight
194.18

Names & synonyms

DIMETHYL TEREPHTHALATE120-61-6Dimethyl p-phthalate1,4-Benzenedicarboxylic acid, dimethyl esterDimethyl 4-phthalateTerephthalic Acid Dimethyl Esterdimethyl benzene-1,4-dicarboxylateDi-Me terephthalateDimethyl 1,4-benzenedicarboxylateDimethyl p-benzenedicarboxylateTerephthalic acid, dimethyl esterMethyl 4-carbomethoxybenzoate
Show more names
DMTDMTDMTdimethy1,4-Benzenedicarboxylicacid,dimethylesterdi-meterephthalateTerephthalate, dimethylTerephthalic acid methyl ester
Methyl p-(methoxycarbonyl)benzoatedimethylterephthalateNCI-C50055DTXSID0020498IKZ2470UNVNSC-3503DIMETYHL TEREPHTHALATEDTXCID60498

Database identifiers

CAS
120-61-6
PubChem CID
8441

Properties

Computed structural propertiesFilling in

XLogP
2.2
Topological polar surface area
52.6 Ų
Hydrogen bond donors
0
Hydrogen bond acceptors
4
Rotatable bonds
4
Heavy atoms
14
Formal charge
0
Complexity
192

Experimental & physicochemical properties

Chemical ClassesOther Classes -> Other Aromatic Compounds
SpringerMaterials Properties13C nuclear magnetic resonance spectrum
PesticidesPesticide -> EPA IRIS
LogP · 2 items

log Kow = 2.25

2.35

Density · 3 items

1.2 at 68 °F 1.08 at 145 °C (liquid) (USCG, 1999) - Denser than water; will sink

1.075 g/cu cm at 141 °C

1.2 g/cm³

ViscosityLiquid viscosity = 1.0682X10-3 Pa.s
Color/Form · 2 items

Colorlesss crystals

NEEDLES FROM ETHER

Solubility · 6 items

less than 1 mg/mL at 55 °F (NTP, 1992)

Soluble in ether and hot alcohol

Soluble in chloroform; slightly soluble in ethanol. methanol

0.3 G/ML IN HOT WATER

In water, 19 mg/L at 25 °C

Solubility in water at 13 °C: very poor

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 6 items

This chemical does not meet GHS hazard criteria for 75.8% (405 of 534) of all reports.

Warning

H317 (13.7%): May cause an allergic skin reaction [Warning Sensitization, Skin]

P261, P272, P280, P302+P352, P321, P333+P317, P362+P364, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 534 reports by companies from 9 notifications to the ECHA C&L Inventory.

Warning

Hazard information

Regulatory Information · 4 items

Chemical: 1,4-Benzenedicarboxylic acid, dimethyl ester

1,4-Benzenedicarboxylic acid, 1,4-dimethyl ester is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of 1,4-Benzenedicarboxylic acid, 1,4-dimethyl ester are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

Status: Active Update: 11-10-2022 https://echa.europa.eu/registration-dossier/-/registered-dossier/15173

1,4-Benzenedicarboxylic acid, dimethyl ester: Does not have an individual approval but may be used as a component in a product covered by a group standard. It is not approved for use as a chemical in its own right.

DOT LabelPoison
Fire Hazards · 2 items

This chemical is combustible. (NTP, 1992)

Combustible. Finely dispersed particles form explosive mixtures in air.

Health HazardsMolten DMT will cause severe burns of skin on contact. (USCG, 1999)
Hazards SummaryAn irritant; [ICSC] May be irritating to the eyes; [HSDB] Causes urinary tract calculi in high-dose animal studies; There are no published reports of human studies; [AIHA] An irritant; [MSDSonline]

Chemistry & industry

Pharmacology

Mechanism of Action · 1 item

... The composition of the bladder calculi from the DMT treated /rats/ ... was primarily calcium and terephthalic acid (TPA) with 5-7% protein. Phosphate levels were low, in contrast to bladder calculi from animals treated directly with terephthalic acid. ... An acidic urinary pH was believed to have induced the hypercalciuria, a characteristic of urolithiasis in man. The higher urinary concentrations of TPA from DMT in the diet (when compared to similar dietary concentrations of TPA) explained the higher incidence of urinary calculi from the DMT diets than from comparable levels of TPA in the diet. Urinary phosphate levels were decreased in the animals consuming the DMT diet and explained why phosphate was present only at very low levels in the bladder calculi in those animals. ... Weanling rats are probably more sensitive to the induction of bladder calculi than adults due to their very high feed consumption rates relative to body weight.

Metabolism/Metabolites · 5 items

In rats administered (14)C labeled DMT orally, ... After dosing five times over a 10-day period, ... In the rat, terephthalic acid was the only compound detected in the urine. In mice, urinary metabolites consisted of monomethyl terephthalate (70%), terephthalic acid (30%), and traces of DMT. Similar metabolites were identified in the feces of both species. DMT administration did not lower the concentration of nonprotein sulfydryl groups, demonstrating DMT is not activated to form electrophilic metabolites.

In rats fed diets containing 5% DMT for 5 days, ... The majority was metabolized to terephthalic acid, which was primarily eliminated by the kidney.

Female F-344 rats received 1 or 2% dimethyl terephthalate in diet for 3 weeks. The urine of the rats was collected and examined. The treatment with dimethyl terephthalate resulted in specific changes in urinary ions, including hypercalciuria and urinary acidosis. Terephthalic acid was detected in the urine, whereas the parent compound was not found. The results indicate that metabolism of the substance to terephthalic acid occurs extensively in rats, and accounts for the ion changes observed in this study.

The major metabolite found in the urine of B6C3F1 mice after oral dosing of (l4)C-dimethyl- terephthalate was monomethyl-(14)C-terephthalate, indicating a minor capacity to hydrolyse the test substance.

For more Metabolism/Metabolites (Complete) data for DIMETHYL TEREPHTHALATE (6 total), please visit the HSDB record page.

Related reactions

156 records
New reaction record
HRID 34889 reaction equation
HRID 34889As reactantuspto-grants-1988_08
HRID 36538 reaction equation
HRID 36538As reactantuspto-grants-1995_05
HRID 46679 reaction equation
HRID 46679As reactantuspto-grants-1979_11
HRID 65883 reaction equation
HRID 65883As productuspto-grants-1978_12
HRID 65884 reaction equation
HRID 65884As reactantuspto-grants-1978_12
HRID 65885 reaction equation
HRID 65885As productuspto-grants-1978_12
HRID 65886 reaction equation
HRID 65886As productuspto-grants-1978_12
HRID 65887 reaction equation
HRID 65887As productuspto-grants-1978_12
PreviousPage 1 of 20

Compound notes

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
DTXSID
DTXSID0020498
ChEMBL
CHEMBL1870757
ChEBI
CHEBI:156286
UNII
IKZ2470UNV
EC Number
204-411-8
Nikkaji
J2.003F
Flash Point · 5 items

308 °F (NTP, 1992)

141 °C

146 °C OC

308 °F (153 °C) (Open cup)

141 °C c.c.

Boiling Point · 3 items

572 °F at 760 mmHg (sublimes) (NTP, 1992)

288 °C

288 °C

DecompositionWhen heated to decomposition it emits acrid smoke and irritating fumes.
Melting Point · 4 items

284 to 288 °F (NTP, 1992)

141 °C

Heat of fusion at melting point = 3.1630X10+7 J/kmol

140 °C

Physicochemical properties

Melting point
140 °C · 140 °C
Boiling point
288 °C · 288 °C
Density
1 · 1,29 g/cm3
bulk density
500 kg/m3 · 500kg/m3
vapor density
1.04 · 1.04 (vs air)
vapor pressure
1.15 mm · 1.15 mm Hg ( 93 °C)
refractive index
1.4752 · 1.4752
Flash point
154 °C · 154 °C
storage temp.
30 °C · Store below +30°C.
solubility
0.0493 g/L · water: slightly soluble0.0493g/L at 20°C
form
Flakes or Pellets
pka
0 · 0[at 20 ℃]
color
White
explosive limit
0.8 · 0.8-11.8%(V)
Water Solubility
It is slightly soluble in water but soluble in hot alcohol and ether.
Specific Heat Capacity
1.34 J/ · Cp(crystal): 1.34 J/(g·K), at 25℃
Merck
14 · 14,9162
BRN
1107185 · 1107185
Henry's Law Constant
7.4 · 7.4×10-2 mol/(m3Pa) at 25℃, Duchowicz et al. (2020)
Stability
Stable. Incompatible with strong acids, strong bases, strong oxidizing agents.
InChI
1S/C10H10O4/c1-13-9(11)7-3-5-8(6-4-7)10(12)14-2/h3-6H,1-2H3
InChIKey
WOZVHXUHUFLZGK-UHFFFAOYSA-N
SMILES
COC(=O)c1ccc(cc1)C(=O)OC
LogP
2.25 at · 2.25 at 25℃
Toxicology and Carcinogenesis
Bioassay of Dimethyl Terephthalate for Possible Carcinogenicity (CASRN 120-61-6)
FDA 21 CFR
177.12 · 177.1200; 177.1500; 177.1590;177.1630; 177.1660; 177.2600
Indirect Additives used in Food Contact Substances
DIMETHYL TEREPHTHALATE
CAS DataBase Reference
120 · 120-61-6(CAS DataBase Reference)
FDA UNII
2470 UNV · IKZ2470UNV
EPA Substance Registry System
Dimethyl terephthalate (120-61-6)
UNSPSC Code
41116107 · 41116107
NACRES
24 · NA.24
Symbol(GHS)
7 · GHS07
Signal word
Warning
Hazard statements
317 · H317
Precautionary statements
261 · P261-P272-P280-P302+P352-P333+P313-P321-P363-P501
PPE
95 · Eyeshields, Gloves, type N95 (US)
Risk Statements
36 · 36/37/38
Safety Statements
24 · 24/25
RIDADR
3256 · 3256
WGK Germany
1 · 1
RTECS
1225000 · WZ1225000
Autoignition Temperature
520 °C · 520 °C DIN 51794
TSCA
TSCA listed
HS Code
2917 · 2917 37 00
Storage Class
11 · 11 - Combustible Solids
Hazardous Substances Data
120 · 120-61-6(Hazardous Substances Data)
Toxicity
50 orally · LD50 orally in Rabbit: 3200 mg/kg
REACH Registrations
Active
Reactive GroupEsters, Sulfate Esters, Phosphate Esters, Thiophosphate Esters, and Borate Esters
Special ReportsEuropean Chemicals Bureau; IUCLID Dataset, Dimethyl terephthalate (120-61-6), 62 pp. (2000 CD-ROM edition). Available from the Database Query page at: http://ecb.jrc.it/esis/esis.php as of May 13, 2008
Reactivity Profile · 1 item

DIMETHYL TEREPHTHALATE is an ester. Esters react with acids to liberate heat along with alcohols and acids. Strong oxidizing acids may cause a vigorous reaction that is sufficiently exothermic to ignite the reaction products. Heat is also generated by the interaction of esters with caustic solutions. Flammable hydrogen is generated by mixing esters with alkali metals and hydrides. Can generate electrostatic charges. [Handling Chemicals Safely 1980. p. 250]. This compound is sensitive to heat. The molten material reacts with water due to the temperature. This compound is incompatible with strong oxidizers, strong acids and strong bases.

Atmospheric Standards · 1 item

This action promulgates standards of performance for equipment leaks of Volatile Organic Compounds (VOC) in the Synthetic Organic Chemical Manufacturing Industry (SOCMI). The intended effect of these standards is to require all newly constructed, modified, and reconstructed SOCMI process units to use the best demonstrated system of continuous emission reduction for equipment leaks of VOC, considering costs, non air quality health and environmental impact and energy requirements. Dimethyl terephthalate is produced, as an intermediate or a final product, by process units covered under this subpart.

Chemical DangersDecomposes on burning. This produces irritating fumes.
Physical DangersDust explosion possible if in powder or granular form, mixed with air.
Air and Water ReactionsWhen mixed with air, the vapor or dust forms very hazardous and highly reactive mixtures. (NTP, 1992). Insoluble in water.

Safety & protection

Fire Fighting · 2 items

Fire Extinguishing Agents: Water, dry chemical, foam, carbon dioxide (USCG, 1999)

Use water spray, foam, powder, carbon dioxide.

First Aid Measures · 4 items

Fresh air, rest.

Rinse and then wash skin with water and soap.

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

Rinse mouth.

First Aid · 1 item

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

Safe StorageStore in an area without drain or sewer access.
Firefighting HazardsPoisonous gases are produced in fire.
Fire Fighting Procedures · 3 items

Extinguish with water, dry chemicals, foam, or carbon dioxide.

From a secure, explosion-proof location, use water spray to cool exposed containers. If cooling streams are ineffective (venting sound increases in volume and pitch, tank discolors, or shows any signs of deforming), withdraw immediately to a secure position.

Alcohol foam. Water or foam may cause frothing.

Storage Conditions · 2 items

Dimethyl terephthalate is stored molten in insulated heated tanks, and is perferentially shipped molten in insulated rail tank cars or tank trucks. It is also solidified into briquettes or flakes, and shipped in 1 ton or 25 kg bags.

Store in tightly closed containers in a cool, well-ventilated area away from oxidizers, nitrates, acids and sources of ignition

Nonfire Spill Response · 1 item

SMALL SPILLS AND LEAKAGE: If you spill this chemical, FIRST REMOVE ALL SOURCES OF IGNITION, then dampen the solid spill material with toluene, then transfer the dampened material to a suitable container. Use absorbent paper dampened with toluene to pick up any remaining material. Your contaminated clothing and absorbent paper should be sealed in a vapor-tight plastic bag for eventual disposal. Solvent-wash all contaminated surfaces with toluene followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.

Disposal Methods · 1 item

SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational exposure or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal, aquatic, and plant life; and conformance with environmental and public health regulations.

Spillage Disposal · 1 item

Personal protection: particulate filter respirator adapted to the airborne concentration of the substance. Do NOT let this chemical enter the environment. Sweep spilled substance into covered sealable containers. If appropriate, moisten first to prevent dusting. Carefully collect remainder. Then store and dispose of according to local regulations.

Preventive Measures · 2 items

SRP: Contaminated protective clothing should be segregated in such a manner so that there is no direct personal contact by personnel who handle, dispose, or clean the clothing. Quality assurance to ascertain the completeness of the cleaning procedures should be implemented before the decontaminated protective clothing is returned for reuse by the workers. Contaminated clothing should not be taken home at end of shift, but should remain at employee's place of work for cleaning.

SRP: The scientific literature for the use of contact lenses in industry is conflicting. The benefit or detrimental effects of wearing contact lenses depend not only upon the substance, but also on factors including the form of the substance, characteristics and duration of the exposure, the uses of other eye protection equipment, and the hygiene of the lenses. However, there may be individual substances whose irritating or corrosive properties are such that the wearing of contact lenses would be harmful to the eye. In those specific cases, contact lenses should not be worn. In any event, the usual eye protection equipment should be worn even when contact lenses are in place.

Isolation and EvacuationExcerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]:

Toxicology

Target OrgansUrinary
Ecotoxicity Values · 5 items

LC50 Pimephales promelas (fathead minnow) 9.6 mg/L/96 hr, static

LC50 Daphnia magna (water flea) 30.4 mg/L/48 hr /Conditions of bioassay not specified in source examined/

LC50 Daphnia magna (water flea) > 100 mg/L/96 hr, static

LC50 Dugesia tigrina (flatworm) > 100 mg/L/96 hr, static

For more Ecotoxicity Values (Complete) data for DIMETHYL TEREPHTHALATE (8 total), please visit the HSDB record page.

Environmental Fate · 3 items

TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 400(SRC), determined from a log Kow of 2.25(2) and a regression-derived equation(3), indicates that dimethyl terephthalate is expected to have moderate mobility in soil(SRC). Volatilization of dimethyl terephthalate from moist soil surfaces is expected to be an important fate process(SRC) given a Henry's Law constant of 1.3X10-4 atm-cu m/mole(SRC), derived from its vapor pressure, 0.01 mm Hg(4), and water solubility, 19 mg/L(5). Dimethyl terephthalate is not expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(4). Dimethyl terephthalate, at a concentration of 0.5%, degraded completely in 15 days at 30 °C in soil with a pH of 8.2 and 60% moisture content(6).

AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 400(SRC), determined from a log Kow of 2.25(2) and a regression-derived equation(3), indicates that dimethyl terephthalate is expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon a Henry's Law constant of 1.3X10-4 atm-cu m/mole(SRC), derived from its vapor pressure, 0.01 mm Hg(4), and water solubility, 19 mg/L(5). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 13 hours and 8.3 days, respectively(SRC). According to a classification scheme(6), an estimated BCF of 11(SRC), from its log Kow(2) and a regression-derived equation(7), suggests the potential for bioconcentration in aquatic organisms is low(SRC). A 3 day river die-away test using 50, 40, and 5 ppm dimethyl terephthalate resulted in 100% biodegradation in all three tests of river water, and 27, 38, and 49% biodegradation in the three tests of sea water(8) suggesting dimethyl terephthalate is expected to biodegrade in aquatic environments(SRC).

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), dimethyl terephthalate, which has a vapor pressure of 0.01 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase dimethyl terephthalate is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 28 days(SRC), calculated from its rate constant of 5.7X10-13 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Dimethyl terephthalate does contain chromophores that absorb at wavelengths >290 nm(4) and therefore may be susceptible to direct photolysis by sunlight(SRC).

Ecotoxicity Excerpts · 2 items

/PLANTS/ Ryegrass, radish, lettuce /were tested in/ 7-Day germination exposures to /dimethyl terephthalate/ concentrations of 0, 1, 10, 100, or 1000 mg/L. There were 80 seeds used for each exposure test level and 40 seeds for control. ... No Adverse Effect Concn: 10 mg/L (rye grass, radish ), 1 mg/L (lettuce).

/PLANTS/ Corn, marigold, lettuce, radish /seedlings were tested in/ 1-week phytotoxicity /aasays/ to /dimethyl terephthalate/ concentrations of 0, 100, and 1000 mg/L. There were 10 corn seedlings and 20 seedlings for the other species per exposure level. ... No Adverse Effect Concn: >1000 mg/L (radish, marigold, lettuce), >100 mg/L (corn).

Signs and SymptomsRedness.
Ongoing Test Status · 1 item

The following link will take the user to the National Toxicology Program (NTP) Test Agent Search Results page, which tabulates all of the "Standard Toxicology & Carcinogenesis Studies", "Developmental Studies", and "Genetic Toxicity Studies" performed with this chemical. Clicking on the "Testing Status" link will take the user to the status (i.e., in review, in progress, in preparation, on test, completed, etc.) and results of all the studies that the NTP has done on this chemical. [http://ntp-apps.niehs.nih.gov/ntp_tox/index.cfm?fuseaction=ntpsearch.searchresults&searchterm=120-61-6]

Effluent Concentrations · 1 item

The concentration of dimethyl terephthalate in the waste water from a dimethyl terephthalate manufacturing plant was less than 0.5 mg/L whereas its acid was found at 459 mg/L(1). This is due to the hydrolysis of dimethyl terephthalate to the acid(1). Dimethyl terephthalate was identified in an industrial wastewater survey sample extracts at a concentration of 557 ng/uL in the organics industry and 21 ng/uL in the organics and plastics industry(2). Dimethyl terephthalate was identified, not quantified, in advanced waste treatment concentrates in Lake Tahoe, CA and in Pomona, CA(3).

ICSC Environmental DataThe substance is harmful to aquatic organisms.
EPA IRIS Information · 3 items

Dimethyl terephthalate (DMT)

Urinary

1 x 10 ^-1 mg/kg-day

Soil Adsorption/Mobility · 1 item

The Koc of dimethyl terephthalate is estimated as 400(SRC), using a log Kow of 2.25(1) and a regression-derived equation(2). According to a classification scheme(3), this estimated Koc value suggests that dimethyl terephthalate is expected to have moderate mobility in soil.

Atmospheric ConcentrationsRURAL/REMOTE: Dimethyl terephthalate was identified, not quantified, in a forest atmosphere in West Germany(1).
Human Toxicity Excerpts · 2 items

/HUMAN EXPOSURE STUDIES/ An oily paste containing 80% DMT showed no irritant effects 24 hr after 10 applications to human skin.

/OTHER TOXICITY INFORMATION/ ... Calculations based on the solubility of calcium terephthalate indicate that humans would have to absorb at least 2.0 grams per day terephthalic acid or 2.5 grams per day dimethyl terephthalate to develop bladder stones.

Regulatory information

Atmospheric Standards · 1 item

This action promulgates standards of performance for equipment leaks of Volatile Organic Compounds (VOC) in the Synthetic Organic Chemical Manufacturing Industry (SOCMI). The intended effect of these standards is to require all newly constructed, modified, and reconstructed SOCMI process units to use the best demonstrated system of continuous emission reduction for equipment leaks of VOC, considering costs, non air quality health and environmental impact and energy requirements. Dimethyl terephthalate is produced, as an intermediate or a final product, by process units covered under this subpart.

Safety data

PPE
Eyeshields, Gloves, type N95 (US)
wgk
1
tsca
TSCA listed
rtecs
WZ1225000
ridadr
3256
hs_code
2917 37 00
Toxicity
LD50 orally in Rabbit: 3200 mg/kg
risk_code
36/37/38
Signal word
Warning
Symbol(GHS)
GHS07
safety_code
24/25
Storage Class
11 - Combustible Solids
Hazard statements
H317
REACH Registrations
Active
Autoignition Temperature
520 °C DIN 51794
Precautionary statements
P261-P272-P280-P302+P352-P333+P313-P321-P363-P501
Hazardous Substances Data
120-61-6(Hazardous Substances Data)
MeSH Pharmacological Classification · 2 items

Substances causing insects to turn away from them or reject them as food.

Substances which pollute the soil. Use for soil pollutants in general or for which there is no specific heading.

Absorption, Distribution and Excretion · 5 items

Data from radio tracer study in rabbits and rats indicate rapid absorption and excretion of (14)C-DMT with no evidence of tissue accumulation following single or repeated oral and intratracheal administration.

Radiotracer study. After a single or repeated dermal application of 80 mg/kg of (14)C-DMT, approximately 11% of single dose and 13% of 5 repeated cutaneous doses were recovered from urine and feces of rats.

Radiotracer study. Approximately 33% of a single ocular dose (50 mg) of (14)C-DMT was excreted in urine and feces of rabbits with no evidence of tissue accumulation or ocular damage.

In rats fed diets containing 5% DMT for 5 days, DMT was almost completely absorbed. ... Only a trace amount was found to be excreted unchanged in the urine. About 15% of the unabsorbed ester appeared in the feces.

For more Absorption, Distribution and Excretion (Complete) data for DIMETHYL TEREPHTHALATE (9 total), please visit the HSDB record page.

Uses & manufacturing

Uses · 6 items

Used to make polyester resins (polyethylene terephthalate for film and fibers); [Hawley]

Polyester resins for film and fiber production, especially polyethylene terephthalate; intermediate.

For use in polymer fibers, polyethylene terphthalate (PET) solid-state resins, polyester film, polybutylene terephthalate and PET engineering resins, and miscellaneous including cyclohexanedimethanol, terephthaloyl chloride, copolyester-ether elastomers, plasticizers, and liquid crystal polymers.

Dimethyl terephthalate is used as an industrial intermediate to manufacture polyethylene terephthalate (PET) and dioctyl terephthalate. ...

... Used to make saturated polyesters with aliphatic diols as the comonomer.

PRODUCT PROFILE: DMT /dimethyl terephthalate/. Dimethyl terephthalate (DMT) is used mainly to produce polyester resins, fibres, and films as well as engineering resins. The polyesters produced are used in fibres for the textile industry, the manufacture of food and drink containers such as polyethylene terephthalate (PET) bottles, and films used in photography, computers, audio-visual equipment and packaging.

U.S. Exports · 5 items

(1972) 5.25X10+10 GRAMS

(1975) 9.4X10+10 GRAMS

CHEMICAL PROFILE: PTA /purified terephthalic acid/ - DMT /dimethyl terephthalate/: US Exports: 1994: 1,095 million pounds

CHEMICAL PROFILE: PTA /purified terephthalic acid/ - DMT /dimethyl terephthalate/: Dimethyl terephthalate: US Exports: 1999: 13 million pounds; 2000: 10 million pounds

For more U.S. Exports (Complete) data for DIMETHYL TEREPHTHALATE (6 total), please visit the HSDB record page.

U.S. Imports · 4 items

(1975) 9.4X10+10 GRAMS

CHEMICAL PROFILE: PTA /purified terephthalic acid/ - DMT /dimethyl terephthalate/: Dimethyl terephthalate: US Imports: 1999: 6 million pounds; 2000: 9 million pounds

CHEMICAL PROFILE: PTA /purified terephthalic acid/ - DMT /dimethyl terephthalate/: Dimethyl terephthalate: US Imports: 2002: 2 million pounds; 2003: 1 million pounds

CHEMICAL PROFILE: PTA /purified terephthalic acid/ and DMT /dimethyl terephthalate/. Dimethyl terephthalate: US Imports: 2005: 2.3 million pounds; 2006: 4.3 million pounds

U.S. Production · 6 items

2023: 1,000,000,000 - <2,500,000,000 lb

(1972) 1.03X10+12 GRAMS

3.270734X10+9 kg including acid (1976)

2454X10+3 tons including acid (1977)

1,449,828X10+3 kg (1993)

For more U.S. Production (Complete) data for DIMETHYL TEREPHTHALATE (14 total), please visit the HSDB record page.

Consumption Patterns · 5 items

(DIMETHYL TEREPHTHALATE & TEREPHTHALIC ACID) ABOUT 93% AS A MONOMER IN POLYESTER FIBER PRODUCTION; ABOUT 7% AS A MONOMER IN POLYESTER FILM PRODUCTION; LESS THAN 1% AS A MONOMER IN PRODUCTION OF POLYBUTYLENE TEREPHTHALATE & OTHER, SMALL VOLUME RESINS (1973)

CHEMICAL PROFILE: PTA /purified terephthalic acid/ - DMT /dimethyl terephthalate/. End-use pattern for PTA+DMT in 1995

CHEMICAL PROFILE: PTA /purified terephthalic acid/ - DMT /dimethyl terephthalate/: US Demand: 1994: 8,500 million pounds; 1995: 8,755 million pounds; 1999: 9,850 million pounds /projected/

CHEMICAL PROFILE: PTA /purified terephthalic acid/ - DMT /dimethyl terephthalate/. End-use pattern for PTA+DMT in 1998

For more Consumption Patterns (Complete) data for DIMETHYL TEREPHTHALATE (13 total), please visit the HSDB record page.

Consumer UsesNot Known or Reasonably Ascertainable
Industry UsesIntermediate
Methods of Manufacturing · 3 items

... Produced by oxidation of the methyl groups on ... p-xylene ... . After oxidation to a carboxylic acid, reaction with methanol gives the methyl ester, dimethyl terephthalate.

Oxidation of para-xylene or mixed xylene isomers, followed by esterification.

PRODUCT PROFILE: DMT /dimethyl terephthalate/. The traditional process to manufacture /dimethyl terephthalate/ is by esterification of /purified terephthalic acid/ with methanol generated by the catalytic homogeneous oxidation of /paraxylene/. The most widely used technology is based on /paraxylene/ using oxidation and esterification steps. /Paraxylene/ is oxidised in the liquid phase by air in the presence of a cobalt salt catalyst to form an oxidate containing p-toluic acid and monomethyl terephthalate. Esterification is carried out in the presence of methanol to form /dimethyl terephthalate/.

Formulations/PreparationsForm of marketed product: Molten liquid
General Manufacturing Information · 4 items

Synthetic Dye and Pigment Manufacturing

1,4-Benzenedicarboxylic acid, 1,4-dimethyl ester: ACTIVE

/POLYESTER/ FIBERS...ARE FORMED OF POLYETHYLENE TEREPHTHALATE. THIS POLYMER IS PRODUCED FROM DIMETHYL TEREPHTHALATE & ETHYLENE GLYCOL...

1978 capacity = 3.2X10+6 tons/year (includes acid)

Applications · 4 items

DescriptionDimethyl terephthalate (DMT) is an organic compound with the formula C6H4(CO2CH3)2. It is the diester formed from terephthalic acid and methanol. It is a white solid that melts to give a distillable colourless liquid.

UsesDimethyl terephthalate is used widely as an industrial intermediate to manufacture polyethylene terephthalate (PET) and dioctyl terephthalate (OECD, 2001).It is used in the Polyester Film (Audio/Video Tape,X-ray Film,Photo Film), Polyester Fiber, Pet Bottle, Polyester Adhesive, Engineering Plastics. DMT is volatile, it is an intermediate in some schemes for the recycling of PET.

UsesDimethyl terephthalate is used in the production of polyesters, including polyethylene terephthalate (PET) and poly trimethylene terephthalate. It consists of benzene substituted with carboxy methyl groups (CO2CH3) at the 1 and 4 positions. Because DMT is volatile, it is an intermediate in some schemes for the recyclic of PET, e.g. from plastic bottles. Hydrogenation of DMT affords the diol cyclohexanedimethanol, which is a useful monomer.

General DescriptionDimethyl terephthalate appears as white solid or heated colorless liquid. Has no odor. Liquid solidifies in cool water. Solid and liquid sink in water. (USCG, 1999)

Preparation methods · 1 item

PreparationSeveral processes have been developed for the preparation of dimethyl terephthalate from p-xylene, but the most important proceeds as follows: The oxidation steps are carried out in the liquid phase at about 170C and 1.5 MPa (15 atmospheres) in the presence of a cobalt acetate or naphthenate catalyst whilst the esterifications are conducted at about 150C. Dimethyl terephthalate may also be produced by esterification of terephthalic acid.

Upstream & downstream products

Upstream raw materials

Cobalt manganese saltp-XyleneMethyl 4-methylbenzoatemono-Methyl terephthalateCopper(II) sulfateMethanolEsterification reactorTerephthalic acidSulfuric acid1,4-Benzenedicarboxylic acid 1-ethyl 4-methyl ester2,5-Furandicarboxylic acid diethyl ester

Downstream products

polyester-based liquid crystalling ionmer containing sulfonate groupPolyester resin paintmono-Methyl terephthalatePolyethylene TerephthalateAntistatic finishing agent1,4-Cyclohexanedimethanol3,8,15,20,27,32-Hexaoxatetracyclo[32.2.2.210,13.222,25]dotetraconta-1(3Terephthalic acid 2-hydroxyethyl methyl esterTerephthalic acid bis(2-hydroxyethyl) esterp-Xylene-alpha,alpha,alpha,alpha',alpha',alpha'-d6trans-1,4-Cyclohexanedimethanol
Additional notes · 1 item

DefinitionChEBI: Dimethyl terephthalate is a diester resulting from the formal condensation of the carboxy groups of terephthalic acid with methanol. It is a primary ingredient widely used in the manufacture of polyesters and industrial plastics. It is a methyl ester, a diester and a phthalate ester. It derives from a terephthalic acid.