HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.1
  1. Home
  2. /Reaction

Methanol → Methyl (E)-4-Chloro-3-methoxy-2-butenoate

HRID 1089571
Print

Reaction equation

HRID 1089571 reaction equation
[Cl:1][CH2:2][C:3](=[O:8])[CH2:4][C:5](Cl)=[O:6].[CH3:9][OH:10].S(Cl)(Cl)=O.S(OC)(O[CH3:18])=O>C(Cl)Cl>[CH3:9][O:10][C:5](=[O:6])/[CH:4]=[C:3](/[O:8][CH3:18])\[CH2:2][Cl:1]
ParticipantsProcedureWorkupSources & evidenceReaction notes

Participants

6

Reactant 4

HCID 887MethanolHCID 24386Thionyl ChlorideHCID 69223Dimethyl sulfiteHCID 30162624-Chloro-3-oxobutyryl chloride

Product 1

HCID 6364655Methyl (E)-4-Chloro-3-methoxy-2-butenoate

Reagents, catalysts & solvents 1

HCID 6344DichloromethaneSolvent

Procedure

206.6 g (0.47 mol) of a 35 percent mixture of 4-chloroacetoacetyl chloride in methylene chloride was cooled to -10° C. Under nitrogen, 102.4 g (3.2 mol) of methanol was added in 30 minutes and then 83.3 g (0.7 mol) of thionyl chloride was added in 30 minutes (formation of dimethyl sulfite). The temperature was raised to room temperature and the solution was stirred for 3 hours at 20° to 25° C. The excess methanol and methylene chloride were then distilled off at reduced pressure. The residue (raw 4-chloro-3,3-dimethoxybutanoic acid methyl ester) was mixed with 0.21 g of methanesulfonic acid and warmed to 125° to 130° C. at a pressure of 100 mbars. Thus, the formed methanol and the excess dimethyl sulfite was distilled off. The residue (raw 4-chloro-3-methoxy-but-2E-enoic acid methyl ester) was taken up in 110.2 g (120 ml) of toluene and the organic phase was washed with 69.8 g of aqueous 16 percent HCl for 30 minutes, with 32.1 g of an aqueous 10 percent sodium chloride solution for 10 minutes, with 134 g of aqueous 10 percent NaOH for 75 minutes and finally with 32.1 g of an aqueous 10 percent sodium chloride solution for 10 minutes. The toluene was then evaporated off and the residue was distilled at a pressure of 20 mbars and a temperature of 95° to 97° C. 4-chloro-3-methoxybut-2E-enoic acid methyl ester was obtained in a yield of 61.7 g (80 percent) in a purity of 99.5 percent (GC).

Workup

  1. distillationThe excess methanol and methylene chloride were then distilled off at reduced pressure
  2. additionThe residue (raw 4-chloro-3,3-dimethoxybutanoic acid methyl ester) was mixed with 0.21 g of methanesulfonic acid
  3. temperaturewarmed to 125° to 130° C. at a pressure of 100 mbars
  4. distillationThus, the formed methanol and the excess dimethyl sulfite was distilled off
  5. washthe organic phase was washed with 69.8 g of aqueous 16 percent HCl for 30 minutes, with 32.1 g of an aqueous 10 percent sodium chloride solution for 10 minutes, with 134 g of aqueous 10 percent NaOH for 75 minutes and finally with 32.1 g of an aqueous 10 percent sodium chloride solution for 10 minutes
  6. customThe toluene was then evaporated off
  7. distillationthe residue was distilled at a pressure of 20 mbars
  8. customa temperature of 95° to 97° C

Sources & evidence

ORD record
ord-6e000af733c14051a930cff8a460def2
Source dataset
uspto-grants-1990_10
DOI
10.6084/m9.figshare.5104873.v1
Patent number
US04966989

Reaction notes

On this pageParticipantsProcedureWorkupSources & evidenceReaction notes