HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Reaction

Ethylene → Ethene propene 1-butene

HRID 1361576
Print

Reaction equation

HRID 1361576 reaction equation
[CH2:1]=[CH:2][CH2:3][CH3:4].[CH2:5]([Al](CC(C)C)CC(C)C)[CH:6](C)C.C=CC.C=C.[Al]>[Cl-].[Cl-].C[Zr](C)(=[SiH2])(C1C2C(=C(C3C=CC=CC=3)C=CC=2)C=C1C)C1C2C(=C(C3C=CC=CC=3)C=CC=2)C=C1C.CO.C1(C)C=CC=CC=1.CCCCCC>[CH2:1]=[CH:2][CH3:3].[CH2:5]=[CH2:6].[CH2:1]=[CH:2][CH2:3][CH3:4]
ParticipantsConditionsProcedureWorkupSources & evidenceReaction notes

Participants

10

Reactant 5

HCID 6325Ethylene2×HCID 78441-ButeneHCID 8252PropyleneHCID 5359268AluminumHCID 16682931Triisobutylaluminum

Product 1

HCID 168434Ethene propene 1-butene

Reagents, catalysts & solvents 4

HCID 178421807
HCID 178421807, compound
Catalyst
HCID 887MethanolSolvent
HCID 1140TolueneSolvent
HCID 8058HexaneSolvent

Conditions

Temperature
20 °C

Procedure

To a 4000 ml polymerization apparatus dried under reduced pressure and thoroughly purged with nitrogen, 1716 ml of dry hexane, 66.6 g of 1-butene, and triisobutylaluminum (1.0 mmol) were charged at normal temperature, then the temperature inside the polymerization apparatus was maintained at 20° C., and the polymerization apparatus was pressurized with propylene to 0.55 MPa and subsequently pressurized with ethylene to 0.80 MPa. Thereafter, a toluene solution in which 0.002 mmol of rac-dimethylsilylenebis(2-methyl-4-phenyl-indenyl)zirconium dichloride and methylaluminoxane (manufactured by Tosoh Finechem Corp.) in terms of 0.3 mmol of aluminum were contacted, was added to the polymerization vessel, and polymerization was conducted for 40 minutes while maintaining the internal temperature at 20° C. and the total pressure at 0.80 MPa by continuously supplying ethylene. The polymerization was stopped by adding 20 ml of methanol. After depressurizing, a polymer was precipitated out of the polymerization solution in 2 L of methanol, and was dried in a vacuum at 130° C. for 12 hours. The obtained polymer was 109.1 g and the polymerization activity was 163.7 kg/mmol-cat-hr. The polymer had a composition of 57.4 mol % of propylene content, 28.0 mol % of ethylene content and 14.6 mol % of 1-butene content, and had an intrinsic viscosity [η] of 2.98 dl/g.

Workup

  1. customTo a 4000 ml polymerization apparatus
  2. customdried under reduced pressure
  3. additionwere charged at normal temperature
  4. additionwas added to the polymerization vessel, and polymerization
  5. temperaturewhile maintaining the internal temperature at 20° C.
  6. customa polymer was precipitated out of the polymerization solution in 2 L of methanol
  7. customwas dried in a vacuum at 130° C. for 12 hours

Sources & evidence

ORD record
ord-f7ed3a07b49e49c882bcc1031473cf84
Source dataset
uspto-grants-2011_02
DOI
10.6084/m9.figshare.5104873.v1
Patent number
US07879960B2

Reaction notes

On this pageParticipantsConditionsProcedureWorkupSources & evidenceReaction notes