HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Reaction

Sulfuric Acid → (S)-3-hydroxysulphonyloxymethyl1,2,3,4-tetrahydroisoquinoline

HRID 262110
Print

Reaction equation

HRID 262110 reaction equation
[OH:1][CH2:2][C@@H:3]1[CH2:12][C:11]2[C:6](=[CH:7][CH:8]=[CH:9][CH:10]=2)[CH2:5][NH:4]1.[S:13](=O)(=[O:16])([OH:15])[OH:14]>O>[OH:16][S:13]([O:1][CH2:2][C@@H:3]1[CH2:12][C:11]2[C:6](=[CH:7][CH:8]=[CH:9][CH:10]=2)[CH2:5][NH:4]1)(=[O:15])=[O:14]
ParticipantsConditionsProcedureWorkupSources & evidenceReaction notes

Participants

4

Reactant 2

HCID 1118Sulfuric AcidHCID 776757[(3S)-1,2,3,4-tetrahydroisoquinolin-3-yl]methanol

Product 1

HCID 54239900(S)-3-hydroxysulphonyloxymethyl1,2,3,4-tetrahydroisoquinoline

Reagents, catalysts & solvents 1

HCID 962WaterSolvent

Conditions

Temperature
110 °C

Procedure

A solution of (S)-3-hydroxymethyl-1,2,3,4-tetrahydroisoquinoline (41 g) in a mixture of 34 N sulphuric acid (13 cc) and water (70 cc) is heated at 110° C. Water (about 50 cc) is distilled off and the residue is then concentrated at 100° C. under reduced pressure (20 mm Hg). The brown oily residue is taken up in a mixture of 34 N sulphuric acid (13 cc) and water (70 cc). Water (50 cc) is again distilled off, the mixture is then concentrated as described above, and the concentration process is concluded at 100° C. under reduced pressure (1 mm Hg). The residue, which crystallises on cooling, is recrystallised from a mixture of ethanol (140 cc) and water (60 cc). After cooling for 15 hours at about 5° C., the resulting crystals are filtered off and washed with a mixture (20 cc) of ethanol and water (3-1 by volume) and then with ethanol (2×25 cc). After drying at 60° C. under reduced pressure (1 mm Hg), (S)-3-hydroxysulphonyloxymethyl-1,2,3,4-tetrahydroisoquinoline (48 g) is obtained in the form of white crystals.

Workup

  1. distillationWater (about 50 cc) is distilled off
  2. concentrationthe residue is then concentrated at 100° C. under reduced pressure (20 mm Hg)
  3. additionThe brown oily residue is taken up in a mixture of 34 N sulphuric acid (13 cc) and water (70 cc)
  4. distillationWater (50 cc) is again distilled off
  5. concentrationthe mixture is then concentrated
  6. customis concluded at 100° C. under reduced pressure (1 mm Hg)
  7. customThe residue, which crystallises
  8. temperatureon cooling
  9. customis recrystallised from a mixture of ethanol (140 cc) and water (60 cc)
  10. temperatureAfter cooling for 15 hours at about 5° C.
  11. filtrationthe resulting crystals are filtered off
  12. washwashed with a mixture (20 cc) of ethanol and water (3-1 by volume)
  13. customAfter drying at 60° C. under reduced pressure (1 mm Hg)

Sources & evidence

ORD record
ord-d7e6f4b5627544f98b85172f99c8d8b9
Source dataset
uspto-grants-1979_05
DOI
10.6084/m9.figshare.5104873.v1
Patent number
US04153698

Reaction notes

On this pageParticipantsConditionsProcedureWorkupSources & evidenceReaction notes