HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Reaction

2,2,4,4-Tetramethyl-1,3-cyclobutanedione → 2,2,4,4-Tetramethylcyclobutane-1,3-diol

HRID 591086
Print

Reaction equation

HRID 591086 reaction equation
[CH3:1][C:2]1([CH3:10])[C:5](=[O:6])[C:4]([CH3:8])([CH3:7])[C:3]1=[O:9]>[Ni].O>[CH3:7][C:4]1([CH3:8])[CH:5]([OH:6])[C:2]([CH3:10])([CH3:1])[CH:3]1[OH:9]
ParticipantsConditionsProcedureWorkupSources & evidenceReaction notes

Participants

4

Reactant 1

HCID 136172,2,4,4-Tetramethyl-1,3-cyclobutanedione

Product 1

HCID 763822,2,4,4-Tetramethylcyclobutane-1,3-diol

Reagents, catalysts & solvents 2

HCID 935NickelCatalystHCID 962WaterSolvent

Conditions

Temperature
100 °C

Procedure

A 300 mL Autoclave Engineers autoclave was charged with 25 grams of 2,2,4,4-tetramethylcyclobutane-1,3-dione, 87.50 grams Isopar™ G, 12.50 grams of water, and approximately 8 grams of washed raney nickel catalyst. The autoclave was pressure purged three times with nitrogen and three times with hydrogen, and the pressure was increased to 3.5 MPa (500 psig) with hydrogen. The autoclave was heated to 100° C. with stirring at approximately 1400 rpm and held for 5 hours at 3.5 MPa (500 psig). Analysis of the product by gas chromatography indicated that complete conversion of the 2,2,4,4-tetramethylcyclobutane-1,3-dione was obtained with 97.3% selectivity to 2,2,4,4-tetramethycyclobutane-1,3-diol with a cis:trans ratio of 0.6:1.

Workup

  1. custompurged three times with nitrogen and three times with hydrogen
  2. temperaturethe pressure was increased to 3.5 MPa (500 psig) with hydrogen

Sources & evidence

ORD record
ord-05fb69ee03844ecd8795ae398833aefa
Source dataset
uspto-grants-2016_01
DOI
10.6084/m9.figshare.5104873.v1
Patent number
US09238603B1

Reaction notes

On this pageParticipantsConditionsProcedureWorkupSources & evidenceReaction notes