HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Reaction

2,2,4,4-Tetramethyl-1,3-cyclobutanedione → 2,2,4,4-Tetramethylcyclobutane-1,3-diol

HRID 591090
Print

Reaction equation

HRID 591090 reaction equation
[CH3:1][C:2]1([CH3:10])[C:5](=[O:6])[C:4]([CH3:8])([CH3:7])[C:3]1=[O:9]>[Ru].O>[CH3:7][C:4]1([CH3:8])[CH:5]([OH:6])[C:2]([CH3:10])([CH3:1])[CH:3]1[OH:9]
ParticipantsConditionsProcedureWorkupSources & evidenceReaction notes

Participants

4

Reactant 1

HCID 136172,2,4,4-Tetramethyl-1,3-cyclobutanedione

Product 1

HCID 763822,2,4,4-Tetramethylcyclobutane-1,3-diol

Reagents, catalysts & solvents 2

HCID 23950RutheniumCatalystHCID 962WaterSolvent

Conditions

Temperature
80 °C

Procedure

A 2 liter Parr autoclave was charged with 50 grams of 2,2,4,4-tetramethylcyclobutane-1,3-dione, 650 grams of dionized water, and 25 grams of 2% ruthenium on alumina (surface area=10 m2/g, purchased from BASF Catalysts). The autoclave was pressure purged three times with nitrogen and three times with hydrogen, and the pressure was increased to 3.5 MPa (500 psig) with hydrogen. The autoclave was heated to 80° C. with stirring at approximately 1000 rpm (revolutions per minute) and held for 6 hours at 3.5 MPa (500 psig). Analysis of the product by gas chromatography indicated that complete conversion of the 2,2,4,4-tetramethylcyclobutane-1,3-dione was obtained with 100% selectivity to 2,2,4,4-tetramethycyclobutane-1,3-diol with a cis:trans ratio of 2.06:1.

Workup

  1. custompurged three times with nitrogen and three times with hydrogen
  2. temperaturethe pressure was increased to 3.5 MPa (500 psig) with hydrogen

Sources & evidence

ORD record
ord-c2d1723211c84b9b9d42926bc30b778c
Source dataset
uspto-grants-2016_01
DOI
10.6084/m9.figshare.5104873.v1
Patent number
US09238602B1

Reaction notes

On this pageParticipantsConditionsProcedureWorkupSources & evidenceReaction notes