HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.0
  1. Home
  2. /Reaction

Ethanol → 2-Hydroxy-7-oxa-4-azaspiro[3.5]nonan-4-ium chloride

HRID 731147
Notes
Print preview

Reaction equation

HRID 731147 reaction equation
[NH:1]1[CH2:6][CH2:5][O:4][CH2:3][CH2:2]1.C(O)C.[CH2:10]([CH:12]1[O:14][CH2:13]1)[Cl:11]>CC(C)=O>[Cl-:11].[OH:14][CH:12]1[CH2:13][N+:1]2([CH2:6][CH2:5][O:4][CH2:3][CH2:2]2)[CH2:10]1
ParticipantsConditionsProcedureWorkupSources & evidenceReaction notes

Participants

5

Reactant 3

HCID 702Ethanol2×HCID 7835EpichlorohydrinHCID 8083Morpholine2×

Product 1

HCID 114466762-Hydroxy-7-oxa-4-azaspiro[3.5]nonan-4-ium chloride

Reagents, catalysts & solvents 1

HCID 180AcetoneSolvent

Conditions

Temperature
250 °C

Procedure

To a 1 L 3-neck round bottom flask, fitted with a thermocouple, nitrogen inlet and a 250 ml addition funnel, was charged morpholine (91.5 g, 91.5 ml, 1.05 mole, 1.0 eq.) and 100 ml of ethanol. The solution was stirred rapidly while adding epichlorohydrin (100 g, 84.5 ml, 1.08 mole, 1.03 eq.) from the addition funnel over about 30 minutes. The temperature was monitored and when the pot temperature reached 27° C., the reaction was cooled with an ice water bath. The clear solution was stirred for 18 hours. The reaction was assayed by GC (dilute 5 drops of reaction mixture into 1 ml of ethanol and inject onto a 15 m DB-5 capillary GC column with the following run parameters, Injector 250° C., detector 250° C., initial oven temperature 28° C. warming to 250° C. at 10° C. per minute.) The reaction was complete with less than 3% morpholine remaining. The reaction was concentrated on the rotoevaporated at 50° C. with full house vacuum until no more distillate could be condensed. The resulting oil was stored at room temperature for 24-48 hours or until a significant mass of crystals was observed (seeded will speed up the process). The slurry was diluted with 250 ml of acetone and filtered. The solids were dried in the vacuum oven at 60° C. for 18-24 hours. This provided 84 g of crystalline product. The mother liquors could be concentrated and the crystallization process repeated in increase recovery. 1H NMR (400 MHz, DMSO-d6) δ 6.55 (d, 1H), 4.64 (m, 1H), 4.53 (m, 2H), 4.18 (m, 2H), 3.74 (m, 4H), 3.60 (m, 2H), 3.48 (m, 2H). 13C NMR (100 MHz, DMSO-d6) δ 70.9, 61.39, 61.04, 60.25, 58.54, 57.80.

Workup

  1. customTo a 1 L 3-neck round bottom flask, fitted with a thermocouple, nitrogen inlet and a 250 ml addition funnel
  2. customreached 27° C.
  3. temperaturethe reaction was cooled with an ice water bath
  4. stirringThe clear solution was stirred for 18 hours
  5. additiondilute
  6. customwith the following run parameters, Injector 250° C.
  7. customdetector 250° C.
  8. concentrationThe reaction was concentrated on the rotoevaporated at 50° C. with full house vacuum until no more distillate
  9. customcondensed
  10. filtrationfiltered
  11. customThe solids were dried in the vacuum oven at 60° C. for 18-24 hours
  12. concentrationThe mother liquors could be concentrated

Sources & evidence

ORD record
ord-6a84a411a91a41c8a1505ef87dcdf975
Source dataset
uspto-grants-2009_09
DOI
10.6084/m9.figshare.5104873.v1
Patent number
US07582756B2

Reaction notes

Loading…

On this pageParticipantsConditionsProcedureWorkupSources & evidenceReaction notes